Skip to contentSkip to conversation

OMAP3 EHCI USB HS mode performance issue

DISCUSSION Ganeshan N 1 participant 1 message Feb 6, 2009

lore
Share & tools
lore

Ganeshan N

author
#0 lore raw

Hi Ajay,

I have tested with USB hard disk and getting ~264 Mbps.  Is there any option/method to increase the performance?

with regards
Ganeshan

----- Original Message ----
From: Ganeshan N <[email protected]>
To: "Gupta, Ajay Kumar" <[email protected]>; "[email protected]" <[email protected]>
Sent: Wednesday, February 4, 2009 11:34:14 AM
Subject: Re: OMAP3 EHCI USB HS mode performance issue

Hi Ajay,
Thanks a lot for your valuable inputs.   I will keep you posted with my observations on this after testing with USB hard disk.

Thanks & Regards
Ganeshan

----- Original Message ----
From: "Gupta, Ajay Kumar" <[email protected]>
To: Ganeshan N <[email protected]>; "[email protected]" <[email protected]>
Sent: Wednesday, February 4, 2009 11:13:36 AM
Subject: RE: OMAP3 EHCI USB HS mode performance issue

Quoted 2 lines

I am transfering 100MB file to pen drive.  I have tried with pen drive with different manufacturer (Tanscend, SanDisk, Kingston).  I am using OMAP35x EVM.

We have observed lower throughput with pen drive so it's better if you take the performance numbers from any USB hard disk.

I think you are using OMAP35x EVM with Mistral daughter card. With Mistral DC, I am getting a read/write throughput of ~160Mbps on EHCI with USB HDD and CPUIDLE=off.

Regards,
Ajay

Quoted 4 lines

Thanks & Regards
Ganeshan

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html