new to U-boot, need help on U-boot porting on SMDK6410
Hi,
I'm new to U-boot, I'm trying to port U-boot on SMDK6410 board which is based on Samsung's ARM11 based S3C6410 system on chip. I have compiled the U-boot s3c-u-boot-1.1.6. As a result of this compilation, six files got created in my current working directory. These are : System.map, u-boot, u-boot.bin, u-boot.dis, u-boot.map and u-boot.srec.
Which file I need to flash on NAND and how?
If I want to go for booting from SD-card what I need to do? I have a Linux machine and don't have Trace-32.
Please suggest me some way out.
Regards,
Sudipta,
India.
Quoted 5 lines
Hi,
I'm new to U-boot, I'm trying to port U-boot on SMDK6410 board which is based on Samsung's ARM11 based S3C6410 system on chip. I have compiled the U-boot s3c-u-boot-1.1.6. As a result of this compilation, six files got created in my current working directory. These are : System.map, u-boot, u-boot.bin, u-boot.dis, u-boot.map and u-boot.srec.
Which file I need to flash on NAND and how?
u-boot.bin, google your question, here is and article from beagleboard wiki which may help you:
http://elinux.org/BeagleBoardNAND
Quoted 1 line
If I want to go for booting from SD-card what I need to do?
Use google, again here is an article in the beagle board wiki which may help you.
http://elinux.org/BeagleBoardBeginners
In here they explain how to make the partitions and where to put u-boot, kernel, filesystem...
Quoted 4 lines
I have a Linux machine and don't have Trace-32.
Please suggest me some way out.
Best regards,
Aldo Brett