Skip to contentSkip to conversation

WARNING in do_wp_page

syzbot syzbot 2 participants 3 messages Apr 12, 2025 – Apr 13, 2025 Memory management

lore
Share & tools
lore

syzbot

author syzbot
#0 lore raw

Hello,

syzbot found the following issue on:

HEAD commit:    0af2f6be1b42 Linux 6.15-rc1
git tree:       upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=1766323f980000
kernel config:  https://syzkaller.appspot.com/x/.config?x=f175b153b655dbb3
dashboard link: https://syzkaller.appspot.com/bug?extid=5e8feb543ca8e12e0ede
compiler:       gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40

Unfortunately, I don't have any reproducer for this issue yet.

Downloadable assets:
disk image: https://storage.googleapis.com/syzbot-assets/f1d71d1bf77d/disk-0af2f6be.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/7f1638f065da/vmlinux-0af2f6be.xz
kernel image: https://storage.googleapis.com/syzbot-assets/9b3e49834705/bzImage-0af2f6be.xz

IMPORTANT: if you fix the issue, please add the following tag to the commit:

Reported-by [email protected]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 7165 at mm/memory.c:3738 __wp_can_reuse_large_anon_folio mm/memory.c:3738 [inline]
WARNING: CPU: 0 PID: 7165 at mm/memory.c:3738 wp_can_reuse_anon_folio mm/memory.c:3788 [inline]
WARNING: CPU: 0 PID: 7165 at mm/memory.c:3738 do_wp_page+0x4c62/0x59f0 mm/memory.c:3918
Modules linked in:
CPU: 0 UID: 0 PID: 7165 Comm: syz.3.280 Not tainted 6.15.0-rc1-syzkaller #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:__wp_can_reuse_large_anon_folio mm/memory.c:3738 [inline]
RIP: 0010:wp_can_reuse_anon_folio mm/memory.c:3788 [inline]
RIP: 0010:do_wp_page+0x4c62/0x59f0 mm/memory.c:3918
Code: 48 89 ef e8 50 c3 ea ff e9 62 b8 ff ff e8 c6 e0 b4 ff 48 c7 c6 20 43 9b 8b 4c 89 e7 e8 f7 a0 fc ff 90 0f 0b e8 af e0 b4 ff 90 <0f> 0b 90 e9 df ed ff ff e8 a1 e0 b4 ff 48 c7 c6 60 46 9b 8b 48 89
RSP: 0018:ffffc900039f77e0 EFLAGS: 00010287
RAX: 0000000000041ec0 RBX: ffffc900039f7a00 RCX: ffffc9000d0c6000
RDX: 0000000000080000 RSI: ffffffff82065c61 RDI: 0000000000000005
RBP: ffffea0001320000 R08: 0000000000000005 R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888012935dc0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
FS:  00007f57215806c0(0000) GS:ffff8881249b9000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000020000001e000 CR3: 000000006cd88000 CR4: 0000000000350ef0
Call Trace:
 <TASK>
 handle_pte_fault mm/memory.c:6013 [inline]
 __handle_mm_fault+0x1ada/0x2a40 mm/memory.c:6140
 handle_mm_fault+0x3fe/0xad0 mm/memory.c:6309
 faultin_page mm/gup.c:1193 [inline]
 __get_user_pages+0x771/0x36f0 mm/gup.c:1491
 populate_vma_page_range+0x278/0x3a0 mm/gup.c:1929
 __mm_populate+0x1d8/0x380 mm/gup.c:2032
 do_mlock+0x448/0x810 mm/mlock.c:655
 __do_sys_mlock mm/mlock.c:663 [inline]
 __se_sys_mlock mm/mlock.c:661 [inline]
 __x64_sys_mlock+0x59/0x80 mm/mlock.c:661
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f572078d169
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5721580038 EFLAGS: 00000246 ORIG_RAX: 0000000000000095
RAX: ffffffffffffffda RBX: 00007f57209a5fa0 RCX: 00007f572078d169
RDX: 0000000000000000 RSI: 0000000000800000 RDI: 0000200000000000
RBP: 00007f572080e2a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f57209a5fa0 R15: 00007fffd504a2f8
 </TASK>

---
This report is generated by a bot. It may contain errors. See https://goo.gl/tpsmEJ for more information about syzbot. syzbot engineers can be reached at [email protected].

syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.

If the report is already addressed, let syzbot know by replying with:
#syz fix: exact-commit-title

If you want to overwrite report's subsystems, reply with:
#syz set subsystems: new-subsystem
(See the list of subsystem names on the web dashboard)

If the report is a duplicate of another one, reply with:
#syz dup: exact-subject-of-another-report

If you want to undo deduplication, reply with:
#syz undup

#1 lore raw
Quoted 3 lines · syzbot

Hello,

syzbot found the following issue on:

Related to my recent changes

Quoted 5 lines
HEAD commit:    0af2f6be1b42 Linux 6.15-rc1
git tree:       upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=1766323f980000
kernel config:  https://syzkaller.appspot.com/x/.config?x=f175b153b655dbb3

CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_MM_ID=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_TRANSPARENT_HUGEPAGE_NEVER is not set
CONFIG_THP_SWAP=y
CONFIG_READ_ONLY_THP_FOR_FS=y
# CONFIG_NO_PAGE_MAPCOUNT is not set
CONFIG_PAGE_MAPCOUNT=y

Quoted 10 lines
dashboard link: https://syzkaller.appspot.com/bug?extid=5e8feb543ca8e12e0ede
compiler:       gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40

Unfortunately, I don't have any reproducer for this issue yet.

Downloadable assets:
disk image: https://storage.googleapis.com/syzbot-assets/f1d71d1bf77d/disk-0af2f6be.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/7f1638f065da/vmlinux-0af2f6be.xz
kernel image: https://storage.googleapis.com/syzbot-assets/9b3e49834705/bzImage-0af2f6be.xz

Quoted 5 lines

IMPORTANT: if you fix the issue, please add the following tag to the commit:

Reported-by [email protected]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 7165 at mm/memory.c:3738 __wp_can_reuse_large_anon_folio mm/memory.c:3738 [inline]

VM_WARN_ON_ONCE(folio_entire_mapcount(folio));

Which is rather unexpected. I know we had a scenario (remapping a THP?) where we would have a PMD mapping and a PTE mapping of an exclusive anon folio for a very short time. But, IIRC locking should make sure that that cannot be observed by some other page table walker.

Unfortunately o reproducer. I'll do some digging ...

Quoted 20 lines
WARNING: CPU: 0 PID: 7165 at mm/memory.c:3738 wp_can_reuse_anon_folio mm/memory.c:3788 [inline]
WARNING: CPU: 0 PID: 7165 at mm/memory.c:3738 do_wp_page+0x4c62/0x59f0 mm/memory.c:3918
Modules linked in:
CPU: 0 UID: 0 PID: 7165 Comm: syz.3.280 Not tainted 6.15.0-rc1-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
RIP: 0010:__wp_can_reuse_large_anon_folio mm/memory.c:3738 [inline]
RIP: 0010:wp_can_reuse_anon_folio mm/memory.c:3788 [inline]
RIP: 0010:do_wp_page+0x4c62/0x59f0 mm/memory.c:3918
Code: 48 89 ef e8 50 c3 ea ff e9 62 b8 ff ff e8 c6 e0 b4 ff 48 c7 c6 20 43 9b 8b 4c 89 e7 e8 f7 a0 fc ff 90 0f 0b e8 af e0 b4 ff 90 <0f> 0b 90 e9 df ed ff ff e8 a1 e0 b4 ff 48 c7 c6 60 46 9b 8b 48 89
RSP: 0018:ffffc900039f77e0 EFLAGS: 00010287
RAX: 0000000000041ec0 RBX: ffffc900039f7a00 RCX: ffffc9000d0c6000
RDX: 0000000000080000 RSI: ffffffff82065c61 RDI: 0000000000000005
RBP: ffffea0001320000 R08: 0000000000000005 R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888012935dc0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
FS:  00007f57215806c0(0000) GS:ffff8881249b9000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000020000001e000 CR3: 000000006cd88000 CR4: 0000000000350ef0
Call Trace:
  <TASK>
Quoted 8 lines
  handle_pte_fault mm/memory.c:6013 [inline]
  __handle_mm_fault+0x1ada/0x2a40 mm/memory.c:6140
  handle_mm_fault+0x3fe/0xad0 mm/memory.c:6309
  faultin_page mm/gup.c:1193 [inline]
  __get_user_pages+0x771/0x36f0 mm/gup.c:1491
  populate_vma_page_range+0x278/0x3a0 mm/gup.c:1929
  __mm_populate+0x1d8/0x380 mm/gup.c:2032
  do_mlock+0x448/0x810 mm/mlock.c:655

During do_mlock() we should be holding the mmap lock in write mode I assume once we reach do_wp_page.

Signature · 3 lines
Cheers,

David / dhildenb
#2 lore raw
Quoted 40 lines · David Hildenbrand
Quoted 3 lines · syzbot

Hello,

syzbot found the following issue on:

Related to my recent changes

Quoted 5 lines
HEAD commit:    0af2f6be1b42 Linux 6.15-rc1
git tree:       upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=1766323f980000
kernel config:  https://syzkaller.appspot.com/x/.config?x=f175b153b655dbb3

CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_MM_ID=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
# CONFIG_TRANSPARENT_HUGEPAGE_NEVER is not set
CONFIG_THP_SWAP=y
CONFIG_READ_ONLY_THP_FOR_FS=y
# CONFIG_NO_PAGE_MAPCOUNT is not set
CONFIG_PAGE_MAPCOUNT=y

Quoted 10 lines
dashboard link: https://syzkaller.appspot.com/bug?extid=5e8feb543ca8e12e0ede
compiler:       gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40

Unfortunately, I don't have any reproducer for this issue yet.

Downloadable assets:
disk image: https://storage.googleapis.com/syzbot-assets/f1d71d1bf77d/disk-0af2f6be.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/7f1638f065da/vmlinux-0af2f6be.xz
kernel image: https://storage.googleapis.com/syzbot-assets/9b3e49834705/bzImage-0af2f6be.xz

Quoted 5 lines

IMPORTANT: if you fix the issue, please add the following tag to the commit:

Reported-by [email protected]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 7165 at mm/memory.c:3738 __wp_can_reuse_large_anon_folio mm/memory.c:3738 [inline]
Quoted 7 lines

VM_WARN_ON_ONCE(folio_entire_mapcount(folio));

Which is rather unexpected. I know we had a scenario (remapping a THP?) where we would have a PMD mapping and a PTE mapping of an exclusive anon folio for a very short time. But, IIRC locking should make sure that that cannot be observed by some other page table walker.

Ah, it likely is a (harless) race, when process A and process B cow-share a PMD THP, and process A write-faults on a PTE mapping of the THP while process B concurrently unmaps the PMD mapping of the THP.

In __folio_remove_rmap(), for RMAP_LEVEL_PMD in case of CONFIG_PAGE_MAPCOUNT=y, we'll do

	folio_dec_large_mapcount(folio, vma);
	last = atomic_add_negative(-1, &folio->_entire_mapcount);

So after decrementing the large mapcount, the folio will be indicated as "exclusive" to process A.

Process B, still has to decrement the entire mapcount, but process A might already run into the entire_mapcount sanity check.

In do_wp_page(), we'd later fail the "folio_large_mapcount(folio) != folio_ref_count(folio)" test until process B is completely done with unmapping the folio.

Maybe we should just move these sanity checks after the refcount check, or reverse the mapcount decrement order. I'll think about that.

Signature · 3 lines
Cheers,

David / dhildenb