Skip to contentSkip to conversation

New HDD (was RE: PROMISE Ultra133 TX2 (PDC20269))

DISCUSSION Enrico Bartky 3 participants 3 messages Nov 13, 2004 – Nov 14, 2004

lore
Share & tools
lore
#0 lore raw

Now I have attached a 80 GB UDMA5 Disk. The hdparm putput says the right UDMA Mode (5). But the hdparm test, I run it 3 times, says 27 MByte/s!? Is that normal, or is my motherboard ( Gigabyte GA-5AA ) to old ( PCI Bus = 33 MHz ). In the manuel from promise there is it described that 33 MHz have bandwith of 133 MByte/s and with 66 MHz 266 MByte/s.

Can you help me, how can I get more transfer rates?

Thanx, EnricoB
________________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193

#1 lore raw
Quoted 1 line · Enrico Bartky

Now I have attached a 80 GB UDMA5 Disk. The hdparm putput says the right UDMA Mode (5). But the hdparm test, I run it 3 times, says 27 MByte/s!? Is that normal, or is my motherboard ( Gigabyte GA-5AA ) to old ( PCI Bus = 33 MHz ). In the manuel from promise there is it described that 33 MHz have bandwith of 133 MByte/s and with 66 MHz 266 MByte/s.

27MB/s is reasonable for a 7200rpm ide disk that isn't totaly state of the art (ie 100GB per platter or something). what were you expecting? That's a pentium era mainboard is it not?

a similar disk (40GB single platter wester digital 7200rpm) in and amd 64 box I have is:

[root@twin joelja]# hdparm -t /dev/hda

/dev/hda:
Timing buffered disk reads: 102 MB in 3.05 seconds = 33.43 MB/sec

the sata 80GB per platter disk in the same box is:

[root@twin joelja]# hdparm -t /dev/sda1

/dev/sda1:
Timing buffered disk reads: 150 MB in 3.02 seconds = 49.71 MB/sec

Quoted 13 lines

Can you help me, how can I get more transfer rates?

Thanx, EnricoB
________________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 1 line
-------------------------------------------------------------------------- Joel Jaeggli  	       Unix Consulting 	       [email protected] GPG Key Fingerprint:     5C6E 0104 BAF0 40B0 5BD3 C38B F000 35AB B67F 56B2
#2 lore raw
In reply to Enrico Bartky
Quoted 3 lines · Enrico Bartky

Now I have attached a 80 GB UDMA5 Disk. The hdparm putput says the right UDMA Mode (5). But the hdparm test, I run it 3 times, says 27 MByte/s!? Is that normal, or is my motherboard ( Gigabyte GA-5AA ) to old ( PCI Bus = 33 MHz ). In the manuel from promise there is it described that 33 MHz have bandwith of 133 MByte/s and with 66 MHz 266 MByte/s.

Can you help me, how can I get more transfer rates?

133 is the speed it can transfer the data over the wire. It does _not_ mean the speed the hard disk is capable of.

Cheers,
Con