Skip to contentSkip to conversation

Getting accelerated X server running

DISCUSSION [email protected] 1 participant 1 message Mar 17, 2009

lore
Share & tools
lore
#0 lore raw

OK, I've managed to get the PowerVR driver compiled and loaded, created the appropriate /dev/ entry, and now when I try to run the Xsgx as supplied by the TI GFX SDK, I get the following:

beagleboard:/usr/X11R6_SGX# bin/Xsgx
PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet.
[4890, /USER/src/omap3-sgx/services4/srvkm/bridged/bridged_pvr_brid]
PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet.
[4890, /USER/src/omap3-sgx/services4/srvkm/bridged/bridged_pvr_brid]
sgxScreenInit: ERROR - can't enumerate pvr2d devices
Could not find the driver.  Make sure that the powervr driver has been loaded
Backtrace (1 deep):
0: bin/Xsgx [0x48038]

Fatal server error:
Segmentation fault caught

Aborted

beagleboard:/usr/X11R6_SGX# lsmod
Module                  Size  Used by
omaplfb                 8488  0
pvrsrvkm              292280  1 omaplfb
ipv6                  247228  24
beagleboard:/usr/X11R6_SGX# ls -la /dev/pvrsrvkm
crw-r--r-- 1 root root 249, 0 2009-03-17 11:41 /dev/pvrsrvkm
beagleboard:/usr/X11R6_SGX#

---------

No other X server is running. This is all begin done as root, so I don't think there are permission issues. strace'ing the server shows that it opens the driver file, then attempts a couple of IOCTLs that fail.

So, what am I missing? Is there some firmware/slushware/??? file that needs to be be made available to initialize the hardware?