Skip to contentSkip to conversation

Shaping weirdness

LARTC micah milano 2 participants 2 messages Aug 13, 2004

lore
Share & tools
lore
#0 lore raw

I've been following the HOWTO, and reading mailing list discussions about throttling bandwidth, and have had some success, but I just want to tie off some loose ends. Essentially what I am wanting to do is to keep our bandwidth usage below 1megabit, because if we go over we get charged for that traffic. I've used some of the examples from the HOWTO to limit our bandwidth, but I find that it gets limited to *half* what I specify. If I specify 256, bandwidth tests (using iperf) show that things are clamped at 128, that makes me scared that I am doing something right.

I'm using cbq, I've seen some people suggest using htb instead because it is more reliable and easier to configure, but I thought i'd get what the HOWTO says working first, and then investigate alternatives.

I've got a machine that sits in front of the network, has the internet plugged into eth0 and the other side plugged into eth1, and I am doing the following:

#!/bin/bash
LIMITDOWN%6
LIMITUP%6
DEV=eth0
DEV2=eth1

# clean up qdiscs
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
tc qdisc del dev $DEV2 root 2> /dev/null > /dev/null
# limit up- and downlink
tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 100mbit
tc qdisc add dev $DEV2 root handle 2: cbq avpkt 1000 bandwidth 100mbit

tc class add dev $DEV parent 1: classid 1:1 cbq rate ${LIMITDOWN}kbit \
allot 1500 prio 5 bounded isolated
tc class add dev $DEV2 parent 2: classid 2:1 cbq rate ${LIMITDOWN}kbit \
allot 1500 prio 5 bounded isolated

tc class add dev $DEV parent 1: classid 1:2 cbq rate ${LIMITUP}kbit \

        allot 1500 prio 5 avpkt 1000
tc class add dev $DEV2 parent 2: classid 2:2 cbq rate ${LIMITUP}kbit \
        allot 1500 prio 5 avpkt 1000

tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst \

        0.0.0.0/0 flowid 1:1
tc filter add dev $DEV2 parent 2: protocol ip prio 16 u32 match ip dst \
        0.0.0.0/0 flowid 2:1

tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip src \

        0.0.0.0/0 flowid 1:2
tc filter add dev $DEV2 parent 2: protocol ip prio 16 u32 match ip src \
        0.0.0.0/0 flowid 2:2

tc qdisc add dev $DEV parent 1:1 sfq perturb 10
tc qdisc add dev $DEV parent 1:2 sfq perturb 10

tc qdisc add dev $DEV2 parent 2:1 sfq perturb 10
tc qdisc add dev $DEV2 parent 2:2 sfq perturb 10
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

what's your MTU size?

Scrive micah milano <[email protected]>:

Quoted 52 lines

I've been following the HOWTO, and reading mailing list discussions about throttling bandwidth, and have had some success, but I just want to tie off some loose ends. Essentially what I am wanting to do is to keep our bandwidth usage below 1megabit, because if we go over we get charged for that traffic. I've used some of the examples from the HOWTO to limit our bandwidth, but I find that it gets limited to *half* what I specify. If I specify 256, bandwidth tests (using iperf) show that things are clamped at 128, that makes me scared that I am doing something right.

I'm using cbq, I've seen some people suggest using htb instead because it is more reliable and easier to configure, but I thought i'd get what the HOWTO says working first, and then investigate alternatives.

I've got a machine that sits in front of the network, has the internet plugged into eth0 and the other side plugged into eth1, and I am doing the following:

#!/bin/bash
LIMITDOWN%6
LIMITUP%6
DEV=eth0
DEV2=eth1

# clean up qdiscs
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
tc qdisc del dev $DEV2 root 2> /dev/null > /dev/null
# limit up- and downlink
tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 100mbit
tc qdisc add dev $DEV2 root handle 2: cbq avpkt 1000 bandwidth 100mbit

tc class add dev $DEV parent 1: classid 1:1 cbq rate ${LIMITDOWN}kbit \
allot 1500 prio 5 bounded isolated
tc class add dev $DEV2 parent 2: classid 2:1 cbq rate ${LIMITDOWN}kbit \
allot 1500 prio 5 bounded isolated

tc class add dev $DEV parent 1: classid 1:2 cbq rate ${LIMITUP}kbit \

        allot 1500 prio 5 avpkt 1000
tc class add dev $DEV2 parent 2: classid 2:2 cbq rate ${LIMITUP}kbit \
        allot 1500 prio 5 avpkt 1000

tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst \

        0.0.0.0/0 flowid 1:1
tc filter add dev $DEV2 parent 2: protocol ip prio 16 u32 match ip dst \
        0.0.0.0/0 flowid 2:1

tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip src \

        0.0.0.0/0 flowid 1:2
tc filter add dev $DEV2 parent 2: protocol ip prio 16 u32 match ip src \
        0.0.0.0/0 flowid 2:2
Quoted 9 lines

tc qdisc add dev $DEV parent 1:1 sfq perturb 10
tc qdisc add dev $DEV parent 1:2 sfq perturb 10

tc qdisc add dev $DEV2 parent 2:1 sfq perturb 10
tc qdisc add dev $DEV2 parent 2:2 sfq perturb 10
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/