Skip to contentSkip to conversation

drm/syncobj: fix DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE

PATCH Superseded Erik Kurzinger 2 participants 3 messages Aug 15, 2023 – Aug 16, 2023

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/syncobj: fix DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE

If DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT is invoked with the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flag set but no fence has yet been submitted for the given timeline point the call will fail immediately with EINVAL. This does not match the intended behavior where the call should wait until the fence has been submitted (or the timeout expires).

The following small example program illustrates the issue. It should wait for 5 seconds and then print ETIME, but instead it terminates right away after printing EINVAL.

  #include <stdio.h>
  #include <fcntl.h>
  #include <time.h>
  #include <errno.h>
  #include <xf86drm.h>
  int main(void)
  {
      int fd = open("/dev/dri/card0", O_RDWR);
      uint32_t syncobj;
      drmSyncobjCreate(fd, 0, &syncobj);
      struct timespec ts;
      clock_gettime(CLOCK_MONOTONIC, &ts);
      uint64_t point = 1;
      if (drmSyncobjTimelineWait(fd, &syncobj, &point, 1,
                                 ts.tv_sec * 1000000000 + ts.tv_nsec + 5000000000, // 5s
                                 DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE, NULL)) {
          printf("drmSyncobjTimelineWait failed %d\n", errno);
      }
  }
---
 drivers/gpu/drm/drm_syncobj.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_syncobj.c +2 -1
index add45001e939..a8e6b61a188c 100644
@@ -1087,7 +1087,8 @@ static signed long drm_syncobj_array_wait_timeout(struct drm_syncobj **syncobjs,
 		fence = drm_syncobj_fence_get(syncobjs[i]);
 		if (!fence || dma_fence_chain_find_seqno(&fence, points[i])) {
 			dma_fence_put(fence);
-			if (flags & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT) {
+			if (flags & (DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT |
+				     DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE)) {
 				continue;
 			} else {
 				timeout = -EINVAL;
Signature · 1 line
2.41.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 5 lines · Erik Kurzinger

If DRM_IOCTL_SYNCOBJ_TIMELINE_WAIT is invoked with the DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE flag set but no fence has yet been submitted for the given timeline point the call will fail immediately with EINVAL. This does not match the intended behavior where the call should wait until the fence has been submitted (or the timeout expires).

Good catch!