Could phosphor-hwmon support peci-sensors
Hi James,
I have some problems with cpusensor in package dbus-sensors. When I set temperatures of critical and warning high for DIMM is work, but Core is not. Could I set temperatures of critical and warning high for Core by json file in entity-manager ?
(There is my josn file for cpu in package entity-manager)
"Thresholds": [
{
"Direction": "greater than",
"Label": "Core",
"Name": "upper critical",
"Severity": 1,
"Value": 75
},
{
"Direction": "greater than",
"Label": "Core",
"Name": "upper non critical",
"Severity": 0,
"Value": 70
},
{
"Direction": "greater than",
"Label": "DIMM",
"Name": "upper critical",
"Severity": 1,
"Value": 85
},
{
"Direction": "greater than",
"Label": "DIMM",
"Name": "upper non critical",
"Severity": 0,
"Value": 80
}
],Thanks.
Duke, Du
Quoted 68 lines
-----Original Message-----
From: openbmc [mailto:[email protected]] On Behalf Of Vijay Khemka
Sent: Wednesday, July 10, 2019 4:20 AM
To: James Feist <[email protected]>; Brad Bishop <[email protected]>; Duke Du (杜祥嘉) <[email protected]>
Cc: [email protected]; Jae Hyun Yoo <[email protected]>
Subject: Re: Could phosphor-hwmon support peci-sensorsOn 7/8/19, 11:29 AM, "openbmc on behalf of James Feist" <[email protected] on behalf of [email protected]> wrote:
On 7/8/19 10:52 AM, Brad Bishop wrote: > On Mon, Jul 08, 2019 at 12:33:21PM +0000, Duke Du (杜祥嘉) wrote: >> Hi All, >> I have some problems with phosphor-hwmon. >> Could package phosphor-hwmon supports peci sensors such as cpuand
Quoted 8 lines
Quoted 6 lines
dimm tempatures ?
If yes, could you give me some hints that how do I write configuration for peci sensors, please :).Thanks.
Duke, Duphosphor-hwmon should work with anything that implements the
hwmon ABI.
Quoted 1 line
So I think to make PECI sensors work with phosphor-hwmon, you need
hwmon
Quoted 5 lines
drivers for PECI sensors. I don't know if anyone is working on that.
I suspect the other sensor application - dbus-sensors supports PECI just fine. But I don't know how it works, if it can be used without entity manager, and/or if it can be run in parallel with phosphor-hwmon.
+ Jae, CPU Sensor Author
https://github.com/openbmc/dbus-sensors/blob/master/src/CPUSensorMain.
cppCPU sensor currently supports PECI sensors
https://github.com/openbmc/dbus-sensors/blob/master/src/CPUSensor.cpp
https://github.com/openbmc/entity-manager/blob/f861da89ed03f9ec556c5e
d6ac819988c0c1f498/configurations/WFT%20Baseboard.json#L2181It does require entity-manager currently, but it could be run in parallel with phosphor-hwmon.
There is peci driver along with hwmon peci driver available in openbmc linux kernel 5.3 which will take care of hwmon interface. And there are also peci-dimm and peci-cpu driver to read cpu and dimm sensors. Once these drivers enabled, it sould work with phosphor-hwmon without entity manager and dbus-sensors.
Regards
-Vijay-James
Quoted 2 lines · Duke Du (杜祥嘉)
Hi James,
I have some problems with cpusensor in package dbus-sensors. When I set temperatures of critical and warning high for DIMM is work, but Core is not. Could I set temperatures of critical and warning high for Core by json file in entity-manager ?
Jae is the implementer of this sensor.
Jae, can you please help? I believe this is because the thresholds are read from the CPU.
Thanks,
-James
Quoted 105 lines
(There is my josn file for cpu in package entity-manager)
"Thresholds": [ { "Direction": "greater than", "Label": "Core", "Name": "upper critical", "Severity": 1, "Value": 75 }, { "Direction": "greater than", "Label": "Core", "Name": "upper non critical", "Severity": 0, "Value": 70 }, { "Direction": "greater than", "Label": "DIMM", "Name": "upper critical", "Severity": 1, "Value": 85 }, { "Direction": "greater than", "Label": "DIMM", "Name": "upper non critical", "Severity": 0, "Value": 80 } ],Thanks.
Duke, DuQuoted 68 lines
-----Original Message-----
From: openbmc [mailto:[email protected]] On Behalf Of Vijay Khemka
Sent: Wednesday, July 10, 2019 4:20 AM
To: James Feist <[email protected]>; Brad Bishop <[email protected]>; Duke Du (杜祥嘉) <[email protected]>
Cc: [email protected]; Jae Hyun Yoo <[email protected]>
Subject: Re: Could phosphor-hwmon support peci-sensorsOn 7/8/19, 11:29 AM, "openbmc on behalf of James Feist" <[email protected] on behalf of [email protected]> wrote:
On 7/8/19 10:52 AM, Brad Bishop wrote: > On Mon, Jul 08, 2019 at 12:33:21PM +0000, Duke Du (杜祥嘉) wrote: >> Hi All, >> I have some problems with phosphor-hwmon. >> Could package phosphor-hwmon supports peci sensors such as cpuand
>> dimm tempatures ?
>> If yes, could you give me some hints that how do I write configuration >> for peci sensors, please :).
>>
>> Thanks.
>> Duke, Du
>
> phosphor-hwmon should work with anything that implements the
hwmon ABI.
> So I think to make PECI sensors work with phosphor-hwmon, you need
hwmon
> drivers for PECI sensors. I don't know if anyone is working on that. >
> I suspect the other sensor application - dbus-sensors supports PECI just > fine. But I don't know how it works, if it can be used without entity > manager, and/or if it can be run in parallel with phosphor-hwmon.+ Jae, CPU Sensor Author
https://github.com/openbmc/dbus-sensors/blob/master/src/CPUSensorMain.
cppCPU sensor currently supports PECI sensors
https://github.com/openbmc/dbus-sensors/blob/master/src/CPUSensor.cpp
https://github.com/openbmc/entity-manager/blob/f861da89ed03f9ec556c5e
d6ac819988c0c1f498/configurations/WFT%20Baseboard.json#L2181It does require entity-manager currently, but it could be run in parallel with phosphor-hwmon.
There is peci driver along with hwmon peci driver available in openbmc linux kernel 5.3 which will take care of hwmon interface. And there are also peci-dimm and peci-cpu driver to read cpu and dimm sensors. Once these drivers enabled, it sould work with phosphor-hwmon without entity manager and dbus-sensors.
Regards
-Vijay-James
Quoted 7 lines · James Feist
Quoted 2 lines · Duke Du (杜祥嘉)
Hi James,
I have some problems with cpusensor in package dbus-sensors. When I set temperatures of critical and warning high for DIMM is work, but Core is not. Could I set temperatures of critical and warning high for Core by json file in entity-manager ?Jae is the implementer of this sensor.
Jae, can you please help? I believe this is because the thresholds are read from the CPU.
In case of CPU package and core temperatures, peci-cputemp hwmon driver reads Tjmax and Tcontrol values from the CPU through PECI and cpusensor service uses it for critical and warning setting so no need to add json setting into entity-manager.
In case of DIMM temperature threshold information cannot be read through PECI so the json setting in entity-manager is needed.
Thanks,
Jae
Quoted 110 lines
Thanks,
-James
Quoted 105 lines
(There is my josn file for cpu in package entity-manager)
"Thresholds": [
{
"Direction": "greater than", "Label": "Core", "Name": "upper critical", "Severity": 1, "Value": 75
},
{
"Direction": "greater than", "Label": "Core", "Name": "upper non critical", "Severity": 0, "Value": 70
},
{
"Direction": "greater than", "Label": "DIMM", "Name": "upper critical", "Severity": 1, "Value": 85
},
{
"Direction": "greater than", "Label": "DIMM", "Name": "upper non critical", "Severity": 0, "Value": 80
}
],Thanks.
Duke, DuQuoted 68 lines
-----Original Message-----
From: openbmc [mailto:[email protected]] On Behalf Of Vijay Khemka
Sent: Wednesday, July 10, 2019 4:20 AM
To: James Feist <[email protected]>; Brad Bishop <[email protected]>; Duke Du (杜祥嘉) <[email protected]>
Cc: [email protected]; Jae Hyun Yoo <[email protected]>
Subject: Re: Could phosphor-hwmon support peci-sensorsOn 7/8/19, 11:29 AM, "openbmc on behalf of James Feist" <[email protected] on behalf of [email protected]> wrote:
On 7/8/19 10:52 AM, Brad Bishop wrote:
> On Mon, Jul 08, 2019 at 12:33:21PM +0000, Duke Du (杜祥嘉) wrote:
>> Hi All,
>> I have some problems with phosphor-hwmon.
>> Could package phosphor-hwmon supports peci sensors such as cpu and
>> dimm tempatures ?
>> If yes, could you give me some hints that how do I write configuration >> for peci sensors, please :).
>>
>> Thanks.
>> Duke, Du
>
> phosphor-hwmon should work with anything that implements the hwmon ABI.
> So I think to make PECI sensors work with phosphor-hwmon, you need hwmon
> drivers for PECI sensors. I don't know if anyone is working on that. >
> I suspect the other sensor application - dbus-sensors supports PECI just > fine. But I don't know how it works, if it can be used without entity > manager, and/or if it can be run in parallel with phosphor-hwmon.+ Jae, CPU Sensor Author
https://github.com/openbmc/dbus-sensors/blob/master/src/CPUSensorMain.
cppCPU sensor currently supports PECI sensors
https://github.com/openbmc/dbus-sensors/blob/master/src/CPUSensor.cpp
https://github.com/openbmc/entity-manager/blob/f861da89ed03f9ec556c5e
d6ac819988c0c1f498/configurations/WFT%20Baseboard.json#L2181It does require entity-manager currently, but it could be run in parallel with phosphor-hwmon.
There is peci driver along with hwmon peci driver available in openbmc linux kernel 5.3 which will take care of hwmon interface. And there are also peci-dimm and peci-cpu driver to read cpu and dimm sensors. Once these drivers enabled, it sould work with phosphor-hwmon without entity manager and dbus-sensors.
Regards
-Vijay-James
On 7/22/19, 2:50 AM, "openbmc on behalf of Duke Du (杜祥嘉)" <[email protected] on behalf of [email protected]> wrote:
Hi James,
I have some problems with cpusensor in package dbus-sensors. When I set temperatures of critical and warning high for DIMM is work, but Core is not. Could I set temperatures of critical and warning high for Core by json file in entity-manager ?
Duke,
I don't think you can configure threshold for "Core", it has been read by cpu directly and set by cpusensors.
(There is my josn file for cpu in package entity-manager)
"Thresholds": [
{
"Direction": "greater than",
"Label": "Core",
"Name": "upper critical",
"Severity": 1,
"Value": 75
},
{
"Direction": "greater than",
"Label": "Core",
"Name": "upper non critical",
"Severity": 0,
"Value": 70
},
{
"Direction": "greater than",
"Label": "DIMM",
"Name": "upper critical",
"Severity": 1,
"Value": 85
},
{
"Direction": "greater than",
"Label": "DIMM",
"Name": "upper non critical",
"Severity": 0,
"Value": 80
}
],
Thanks.
Duke, Du
> -----Original Message-----
> From: openbmc
> [mailto:[email protected]] On
> Behalf Of Vijay Khemka
> Sent: Wednesday, July 10, 2019 4:20 AM
> To: James Feist <[email protected]>; Brad Bishop
> <[email protected]>; Duke Du (杜祥嘉)
> <[email protected]>
> Cc: [email protected]; Jae Hyun Yoo <[email protected]>
> Subject: Re: Could phosphor-hwmon support peci-sensors
>
>
>
> On 7/8/19, 11:29 AM, "openbmc on behalf of James Feist"
> <[email protected] on behalf of
> [email protected]> wrote:
>
> On 7/8/19 10:52 AM, Brad Bishop wrote:
> > On Mon, Jul 08, 2019 at 12:33:21PM +0000, Duke Du (杜祥嘉) wrote:
> >> Hi All,
> >> I have some problems with phosphor-hwmon.
> >> Could package phosphor-hwmon supports peci sensors such as cpu
> and
> >> dimm tempatures ?
> >> If yes, could you give me some hints that how do I write configuration
> >> for peci sensors, please :).
> >>
> >> Thanks.
> >> Duke, Du
> >
> > phosphor-hwmon should work with anything that implements the
> hwmon ABI.
> > So I think to make PECI sensors work with phosphor-hwmon, you need
> hwmon
> > drivers for PECI sensors. I don't know if anyone is working on that.
> >
> > I suspect the other sensor application - dbus-sensors supports PECI just
> > fine. But I don't know how it works, if it can be used without entity
> > manager, and/or if it can be run in parallel with phosphor-hwmon.
>
> + Jae, CPU Sensor Author
>
>
> https://github.com/openbmc/dbus-sensors/blob/master/src/CPUSensorMain.
> cpp
>
> CPU sensor currently supports PECI sensors
>
> https://github.com/openbmc/dbus-sensors/blob/master/src/CPUSensor.cpp
>
>
> https://github.com/openbmc/entity-manager/blob/f861da89ed03f9ec556c5e
> d6ac819988c0c1f498/configurations/WFT%20Baseboard.json#L2181
>
> It does require entity-manager currently, but it could be run in
> parallel with phosphor-hwmon.
>
> There is peci driver along with hwmon peci driver available in openbmc linux
> kernel 5.3 which will take care of hwmon interface. And there are also
> peci-dimm and peci-cpu driver to read cpu and dimm sensors. Once these
> drivers enabled, it sould work with phosphor-hwmon without entity manager
> and dbus-sensors.
>
> Regards
> -Vijay
>
> -James
>