Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
The WinTV did work correctly with ubuntu 9.10. In this version of Ubuntu the package linux-firmware-nonfree didn't include the dvb-fe-tda10048-1.0.fw. I remember that Ubuntu 9.10 used dvb-fe-tda10046.fw.
Now, Ubuntu 10.04 loads for my card the dvb-fe-tda10048-1.0.fw Its seems that with the 9.10 version, the card is recognized as WinTV-HVR-1100 or 1110 and now as WinTV-HVR-1120.
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1120
How recognize Linux the version of the card?
Thanks
----- Messaggio originale -----
Quoted 29 lines
Da: fabio tirapelle <[email protected]>
A: Bjorn Helgaas <[email protected]>
Cc: [email protected]; Michael Krufky <[email protected]>
Inviato: Mer 13 ottobre 2010, 23:26:02
Oggetto: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04Yesterday I have installed (added not substituted) a new tuner: Hauppauge
Nova-T Stick 3
Today the WinTV-HVR-1120 doesn't works.
I attach my/var/log/messageslsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 15c2:0036 SoundGraph Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 2040:7070 Hauppauge Nova-T Stick 3 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hublscpi
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
Controller
(rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev
Quoted 12 lines
a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1) 00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
Controller
(rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor
(rev
a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory
Controller
(rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB
1.1
Quoted 2 lines
Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB
2.0
Quoted 2 lines
Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB
1.1
Quoted 25 lines
Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB
2.0
Controller (rev a1)
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1) 00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (reva1)
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA
Controller
(non-AHCI mode) (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
Bridge
(rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
Bridge
(rev a1)
00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express
Bridge
(rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Quoted 8 lines
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:06.0 Multimedia controller: Philips Semiconductors
SAA7131/SAA7133/SAA7135
Quoted 7 lines
Video Broadcast Decoder (rev d1)
01:07.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB
chip/
Technisat SkyStar2 DVB card (rev 02)
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200]
(rev
Quoted 7 lines
a2)
Quoted 4 lines
----- Messaggio originale -----
Quoted 3 lines
Da: Bjorn Helgaas <[email protected]> A: fabio tirapelle <[email protected]>Cc [email protected]; Michael Krufky
Quoted 208 lines
Quoted 12 lines
Quoted 5 lines
Inviato: Mer 13 ottobre 2010, 21:54:31
Oggetto: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04Quoted 1 line · fabio tirapelle
After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge
WinTV-HVR-1120
Quoted 5 lines
Quoted 5 lines
(sometimes) doesn't work correctly.
I get random the following errors:
tda18271_write_regs: ERROR: idx =0x5, len = 1,i2c_transferreturned:
-5
Quoted 190 lines
Quoted 23 lines
Quoted 3 lines
tda18271_init: error -5 on line 826 tda18271_tune: error -5 on line 904 tda18271_set_params: error -5 on line 985I cc'd Michael since he made several recent tda18271 changes.
This page: http://cvs.linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner
suggests that the card might work, despite the error messages. Does
yours work?I see that
tda18271_write_regs()usesi2c_transfer(), which uses theadap->algo->master_xferfunction pointer, but I don't know enough to figure out whichmaster_xferimplementation might be used on your
system. A complete dmesg log and lspci output might have a hint.Can you reproduce this on an upstream kernel? It would be good to
make sure that it's not something introduced by an Ubuntu patch or
fixed since the Ubuntu kernel snapshot.Bjorn
Quoted 2 lines
Part of dmesg of 11-OCT-2010
Quoted 12 lines
Quoted 2 lines
[ 53.216153] DVB: registering new adapter (saa7133[0]) [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HNDVB-T)...
Quoted 3 lines
[ 53.840013] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.840019] saa7134 0000:01:06.0: firmware: requestingdvb-fe-tda10048-1.0.fw
Quoted 4 lines
[ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes. [ 53.880509] tda10048_firmware_upload: firmware uploading [ 58.280136] tda10048_firmware_upload: firmware uploaded [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 2 lines
Quoted 2 lines
returned: -5
[ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 online
Quoted 2 lines
264
Quoted 1 line
[ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 9 lines
Quoted 9 lines
returned: -5
[ 59.420157] tda18271_toggle_output: error -5 on line 47 [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns) [ 256.293639] eth0: link up. [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 263.523498] eth0: link down. [ 265.258740] eth0: link up. [ 266.460026] eth0: no IPv6 routers present [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 3 lines
Quoted 3 lines
returned: -5
[ 9869.636178] tda18271_init: error -5 on line 826 [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 3 lines
Quoted 3 lines
returned: -5
[ 9872.636232] tda18271_toggle_output: error -5 on line 47 [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 3 lines
Quoted 3 lines
returned: -5
[ 9998.240178] tda18271_init: error -5 on line 826 [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 9 lines
Quoted 9 lines
returned: -5
[10001.240190] tda18271_toggle_output: error -5 on line 47And this is the dmesg of today: even the same errors.
[ 741.252183] tda18271_init: error -5 on line 826 [ 741.252188] tda18271_tune: error -5 on line 904 [ 741.252193] tda18271_set_params: error -5 on line 985 [ 742.268174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 742.268184] tda18271_init: error -5 on line 826 [ 742.268189] tda18271_tune: error -5 on line 904 [ 742.268194] tda18271_set_params: error -5 on line 985 [ 743.284174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 743.284184] tda18271_init: error -5 on line 826 [ 743.284190] tda18271_tune: error -5 on line 904 [ 743.284194] tda18271_set_params: error -5 on line 985 [ 744.300169] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 744.300180] tda18271_init: error -5 on line 826 [ 744.300185] tda18271_tune: error -5 on line 904 [ 744.300190] tda18271_set_params: error -5 on line 985 [ 745.320172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 745.320183] tda18271_init: error -5 on line 826 [ 745.320188] tda18271_tune: error -5 on line 904 [ 745.320193] tda18271_set_params: error -5 on line 985 [ 746.336174] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 746.336185] tda18271_init: error -5 on line 826 [ 746.336190] tda18271_tune: error -5 on line 904 [ 746.336195] tda18271_set_params: error -5 on line 985 [ 747.352170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 747.352181] tda18271_init: error -5 on line 826 [ 747.352187] tda18271_tune: error -5 on line 904 [ 747.352192] tda18271_set_params: error -5 on line 985 [ 748.368172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 748.368183] tda18271_init: error -5 on line 826 [ 748.368188] tda18271_tune: error -5 on line 904 [ 748.368193] tda18271_set_params: error -5 on line 985 [ 749.384179] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 749.384191] tda18271_init: error -5 on line 826 [ 749.384196] tda18271_tune: error -5 on line 904 [ 749.384202] tda18271_set_params: error -5 on line 985 [ 750.400172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 750.400182] tda18271_init: error -5 on line 826 [ 750.400188] tda18271_tune: error -5 on line 904 [ 750.400194] tda18271_set_params: error -5 on line 985 [ 751.424170] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 5 lines
Quoted 5 lines
returned: -5
[ 751.424181] tda18271_init: error -5 on line 826 [ 751.424186] tda18271_tune: error -5 on line 904 [ 751.424192] tda18271_set_params: error -5 on line 985 [ 752.440172] tda18271_write_regs: ERROR: idx = 0x5, len = 1,
i2c_transferQuoted 17 lines
Quoted 16 lines
returned: -5
Any ideas?
Thanks