Skip to contentSkip to conversation

probe of omap2-nand failed with -16

DISCUSSION Pablo Bitton 2 participants 2 messages Mar 8, 2010 – Mar 9, 2010

lore
Share & tools
lore
#0 lore raw

Hi,

I've started working on beagle board.

Using pre-compiled kernel (angstrom) - i've got nand driver loaded and running.

When I am trying to compile my own kernel from the source, I get error:

Quoted 1 line
Quoted 1 line

probe of omap2-nand failed with -16 (EBUSY)

I've selected all configs for Nand...

Am I missing something? Mux configuration? GPIO's? Anybody has any idea?

thanks,
--
Pablo

#1 lore raw
Quoted 9 lines · Pablo Bitton

Hi,

I've started working on beagle board.

Using pre-compiled kernel (angstrom) - i've got nand driver loaded and running.

When I am trying to compile my own kernel from the source, I get error:

Quoted 1 line
Quoted 1 line

probe of omap2-nand failed with -16 (EBUSY)

This happens because we moved 'gpmc_cs_request' from nand driver (nand/omap2.c) probe to 'mach-omap2/gpmc-nand.c'.

Quoted 5 lines

I've selected all configs for Nand...

Am I missing something? Mux configuration? GPIO's? Anybody has any idea?

Yes. You need to adopt gpmc-nand.c for beagle boards.

For help you may have a look into below commits:
1. <http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commitdiff;h=c2798e9342a1394de966c31703e0410ee3988378>

2. <http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commitdiff;h=88c8460ac32283e2a25e36e4670ff5ab02f3b521>

Signature · 2 lines
Regards,
Vimal Singh