OT: Linux kernel booting problem (help me!!)
Hi all,
i' m hanged with this problem since 2 weeks ago... i wonder if anyone of you have any idea for resolve this matter...
This is the output I have:
--------------
## Booting image at 00100000 ...
Image Name: mercurio --- 10001 - Thu Jun Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 490783 Bytes = 479.3 kB
Load Address: 00200000
Entry Point: 00200000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Memory BAT mapping: BAT2=16Mb, BAT3=0Mb, residual: 0Mb
Linux version 2.4.25 (root at mercurio) (gcc version 3.3.3 (DENX ELDK 3.1.1 3.3.3-9 )) #2 Thu Jun 16 11:49:57 CEST 2005
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw nfsroot=141.137.67.254:/provaFS ip=141.137 .67.253:141.137.67.254:141.137.67.100:255.255.255.0:priscilla::off
Warning: real time clock seems stuck!
Calibrating delay loop... 79.87 BogoMIPS
Memory: 15012k available (848k kernel code, 280k data, 40k init, 0k highmem) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
CPM UART driver version 0.01
ttyS0 on SCC1 at 0x8000, BRG7
ttyS1 on SCC2 at 0x8100, BRG1
Serial driver version 5.05c (2001-07-08) with no serial options enabled
Oops: kernel access of bad area, sig: 11 NIP: C007150C XER: 00000000 LR: C0075CAC SP: C0173E90 REGS: c0173de0 TRAP: 0300 Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 000003F9, DSISR: 20000000
TASK = c0172000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 00000000 C0173E90 C0172000 C0173EA0 00000001 00000008 C00D622C 000003F8
GPR08: 00000000 000003F8 00000000 10000000 0000000D 7FFFFFFF 00FF5000 007FFF7D
GPR16: 00200000 007FFF00 00FF8A30 00000000 003FF000 00000001 00BC3588 00FFF25C
GPR24: 00000000 00123238 C0100000 C0173EA0 00000001 C01137C4 00000000 C00EF414 Call backtrace:
00123238 C00FD5F8 C00F75CC C00039D0 C0007FD8
Kernel panic: Attempted to kill init! <0>Rebooting in 180 seconds..Machine check in kernel mode.
sCaubed fy ( rom1SRR0=41:00)
-------------
did you ever verified somewhat like this?
Any help/suggestion will be appreciated.
Thanks in advance,
Lele
Quoted 1 line · In message <[email protected]> you wrote:
Hi all,
You _know_ that you are off topic here and post anyway? Grrrrghhh...
Don't do this again, please.
...
Quoted 3 lines
Kernel command line: root=/dev/nfs rw nfsroot=141.137.67.254:/provaFS i> p=141.137 .67.253:141.137.67.254:141.137.67.100:255.255.255.0:priscilla::off
Warning: real time clock seems stuck!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Check this.
...
Quoted 4 lines
Starting kswapd
CPM UART driver version 0.01
ttyS0 on SCC1 at0x8000, BRG7
ttyS1 on SCC2 at0x8100, BRG1
Which sort of processor is this? A MPC8260 or so?
Quoted 1 line
Serial driver version 5.05c (2001-07-08) with no serial options enabled
Your kernel is misconfigured.
Quoted 4 lines
Call backtrace:
00123238 C00FD5F8 C00F75CC C00039D0 C0007FD8Kernel panic: Attempted to kill init! <0>Rebooting in 180 seconds..Machine check in kernel mode.
Did you decode the backtrace? No??? Why not???
You are supposed to do that before posting.
Quoted 2 lines
did you ever verified somewhat like this?
Any help/suggestion will be appreciated.
Remove CONFIG_SERIAL from your kernel configuration.
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Many aligators will be slain, but the swamp will remain.