Terratec Cinergy XS unsupported Device

-----Ursprüngliche Nachricht-----
Von: "Markus Rechberger" <[email protected]>
Gesendet: 13.08.08 12:40:05
An: "Stefan Lange" <[email protected]>
CC: [email protected], [email protected]
Betreff: Re: Terratec Cinergy XS unsupported Device

Quoted 2 lines · Stefan Lange

So i have to wait for your next release right ? Or can i do it by myself ?

yes you have to wait a bit for it... you can try to move the changes from v4l-dvb-experimental to em28xx-new on mcentral.de, there are still a few things missing in the latest repository; although I'm trying to take care that no other drivers will break with any updates.

Markus

Quoted 44 lines

Thank you
Stefan

Quoted 38 lines

-----Ursprüngliche Nachricht-----
Von: "Markus Rechberger" <[email protected]>
Gesendet: 13.08.08 11:20:29
An: "Stefan Lange" <[email protected]>
CC: [email protected], [email protected]
Betreff: Re: Terratec Cinergy XS unsupported Device

Quoted 8 lines · Stefan Lange

He guys,

i am using Terratec Cinergy XS with the new em28xx modules.

I have now cleared the old v4l stuff.

But i get the following messages.

Quoted 15 lines

[  791.731021] em28xx: new video device (0ccd:0043): interface 0, class 255
[  791.731027] em28xx: device is attached to a USB 2.0 bus
[  791.731038] em28xx #0: Alternate settings: 8
[  791.731042] em28xx #0: Alternate setting 0, max size= 0
[  791.731045] em28xx #0: Alternate setting 1, max size= 0
[  791.731049] em28xx #0: Alternate setting 2, max size= 1448
[  791.731053] em28xx #0: Alternate setting 3, max size= 2048
[  791.731056] em28xx #0: Alternate setting 4, max size= 2304
[  791.731060] em28xx #0: Alternate setting 5, max size= 2580
[  791.731063] em28xx #0: Alternate setting 6, max size= 2892
[  791.731067] em28xx #0: Alternate setting 7, max size= 3072
[  792.172113] em2880-dvb.c: DVB Init
[  792.274627] em2880-dvb.c: unsupported device
[  792.274634] em28xx #0: Found Terratec Cinergy T XS (MT2060)

The mt2060 support needs to be ported from the old repository to the latest em28xx driver.

Markus