2.6 git kernel reporting bug in knodemgrd_0 during boot
I just upgraded my dev box to the latest 2.6 source via git and this is now printing out in dmesg upon every boot. Hardware is a standard VIA EPIA-MII motherboard w/ nothing extra added. I can supply additional info if anyone requests it. -Andrew
Probing IDE interface ide0...
hda: HITACHI_DK23DA-40, ATA DISK drive
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040635000015f17]
------------[ cut here ]------------ Kernel BUG at [verbose debug info unavailable] invalid opcode: 0000 [#1] Modules linked in: CPU: 0 EIP: 0060:[<b014932e>] Not tainted VLI EFLAGS: 00010002 (2.6.19-rc3-g2da6dc28 #1)
EIP is at cache_alloc_refill+0x18e/0x400
eax: 00000000 ebx: 0000003c ecx: 00000000 edx: 00000000
esi: bdfed770 edi: bdfed760 ebp: bdfea000 esp: bd2bbe00
ds: 007b es: 007b ss: 0068
Process knodemgrd_0 (pid: 174, ti=bd2ba000 task=bdfa8ab0 task.ti=bd2ba000)
Stack: 000200d2 000000d2 bdfef0c0 bdfee1e0 0000003c 00000000 00000001 b03a61ec
000000d2 b03a61ec bdfa8ab0 00000246 00001fff 000000d2 00000163 b0149192
be800000 b0143085 bd2bbe7c 00000002 ffffffff 00000001 000000d2 ffffffff
Call Trace:
[<b0149192>] kmem_cache_alloc+0x22/0x30
[<b0143085>] __get_vm_area_node+0x95/0x160
[<b0143187>] get_vm_area_node+0x37/0x40
[<b014370c>] __vmalloc_node+0x3c/0x60
[<b014375f>] __vmalloc+0xf/0x20
[<b0269ced>] csr1212_attach_keyval_to
_directory+0x1d/0x60
[<b026a52c>] csr1212_parse_keyval+0x14c/0x200
[<b026a9be>] _csr1212_read_keyval+0x3de/0x420
[<b0268185>] nodemgr_probe_ne+0x205/0x390
[<b0179561>] sysfs_add_file+0x61/0x70
[<b0268c3c>] nodemgr_host_thread+0x82c/0x980
[<b0268410>] nodemgr_host_thread+0x0/0x980
[<b0125a4f>] kthread+0xaf/0xe0
[<b01259a0>] kthread+0x0/0xe0
[<b0103d47>] kernel_thread_helper+0x7/0x10
=======================
Code: 04 89 37 83 7c 24 10 00 0f 8f 5a ff ff ff 8b 47 18 2b 45 00 8947 18 83 7d 00 00 0f 85 61 02 00 00 f7 44 24 04 0e 80 f8 ff 74 02 <0f> 0b f7 44 24 04 00 20 00 00 0f 85 2d 02 00 00 8b 5c 24 04 81
EIP: [<b014932e>] cache_alloc_refill+0x18e/0x400 SS:ESP 0068:bd2bbe00 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Quoted 4 lines · Andrew Paprocki
I just upgraded my dev box to the latest 2.6 source via git and this is now printing out in dmesg upon every boot. Hardware is a standard VIA EPIA-MII motherboard w/ nothing extra added. I can supply additional info if anyone requests it. -Andrew
The ieee1394 maintainers (Cc'ed) might be the best contact.
Quoted 5 lines
Probing IDE interface ide0...
hda: HITACHI_DK23DA-40, ATA DISK drive
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0040635000015f17]------------[ cut here ]------------ Kernel BUG at [verbose debug info unavailable]
The bug message with CONFIG_DEBUG_BUGVERBOSE=y set might be interesting.
Quoted 35 lines
invalid opcode: 0000 [#1]
Modules linked in: CPU: 0 EIP: 0060:[<b014932e>] Not tainted VLI EFLAGS: 00010002 (2.6.19-rc3-g2da6dc28 #1)EIP is at
cache_alloc_refill+0x18e/0x400
eax: 00000000 ebx:0000003cecx: 00000000 edx: 00000000
esi:bdfed770edi:bdfed760ebp:bdfea000esp:bd2bbe00
ds: 007b es: 007b ss: 0068
Processknodemgrd_0(pid: 174, ti=bd2ba000 task=bdfa8ab0 task.ti=bd2ba000)Stack: 000200d2 000000d2 bdfef0c0 bdfee1e0 0000003c 00000000 00000001 b03a61ec 000000d2 b03a61ec bdfa8ab0 00000246 00001fff 000000d2 00000163 b0149192 be800000 b0143085 bd2bbe7c 00000002 ffffffff 00000001 000000d2 ffffffff Call Trace: [<b0149192>] kmem_cache_alloc+0x22/0x30 [<b0143085>] __get_vm_area_node+0x95/0x160 [<b0143187>] get_vm_area_node+0x37/0x40 [<b014370c>] __vmalloc_node+0x3c/0x60 [<b014375f>] __vmalloc+0xf/0x20 [<b0269ced>] csr1212_attach_keyval_to _directory+0x1d/0x60 [<b026a52c>] csr1212_parse_keyval+0x14c/0x200 [<b026a9be>] _csr1212_read_keyval+0x3de/0x420 [<b0268185>] nodemgr_probe_ne+0x205/0x390 [<b0179561>] sysfs_add_file+0x61/0x70 [<b0268c3c>] nodemgr_host_thread+0x82c/0x980 [<b0268410>] nodemgr_host_thread+0x0/0x980 [<b0125a4f>] kthread+0xaf/0xe0 [<b01259a0>] kthread+0x0/0xe0 [<b0103d47>] kernel_thread_helper+0x7/0x10 ======================= Code: 04 89 37 83 7c 24 10 00 0f 8f 5a ff ff ff 8b 47 18 2b 45 00 89
Quoted 4 lines
47 18 83 7d 00 00 0f 85 61 02 00 00 f7 44 24 04 0e 80 f8 ff 74 02 <0f> 0b f7 44 24 04 00 20 00 00 0f 85 2d 02 00 00 8b 5c 24 04 81
EIP: [<b014932e>]cache_alloc_refill+0x18e/0x400SS:ESP 0068:bd2bbe00 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedQuoted 3 lines · Adrian Bunk
Quoted 2 lines · Andrew Paprocki
I just upgraded my dev box to the latest 2.6 source via git and this is now printing out in dmesg upon every boot.
...
Andrew, what was the last kernel which didn't log this?
This seems to be either a previously unknown but old problem in the csr1212 library or a new problem outside of the ieee1394 subsystem.
Quoted 1 line
The ieee1394 maintainers (Cc'ed) might be the best contact.
...
Thanks Adrian. (I watch lkml but it's easy to miss posts due to lkml's high traffic.)
Signature · 3 lines
Stefan Richter -=====-=-==- =-=- ===-= http://arcgraph.de/sr/
Quoted 5 lines · I wrote:
Quoted 3 lines · Andrew Paprocki
Quoted 2 lines
I just upgraded my dev box to the latest 2.6 source via git and this is now printing out in dmesg upon every boot.
...
Andrew, what was the last kernel which didn't log this?
And did you change any of the IEEE1394 options in the kernel configuration?
Signature · 3 lines
Stefan Richter -=====-=-==- =-=- ====- http://arcgraph.de/sr/
Quoted 1 line
Quoted 1 line
Andrew, what was the last kernel which didn't log this?
I was previously using a stock Debian snapshot from 2006-10-11 which comes with the 2.6.17 kernel standard (vmlinuz-2.6.17-2-486 is what it installs).
I had already rebuilt the 2.6.17 source that comes with that install, tweaking the configuration for the VIA motherboard and it did not report any problems. Last night I just git'd the latest 2.6 source and copied the same .config from the previous kernel over, and answered any new questions that popped up during make config for the newer source.
Quoted 1 line
And did you change any of the IEEE1394 options in the kernel configuration?
I copied the .config from the working kernel over, and I don't believe I changed anything from the working 2.6.17 configuration. These are the options currently set:
# grep IEEE .config # CONFIG_IEEE80211 is not set # IEEE 1394 (FireWire) support CONFIG_IEEE1394=y # CONFIG_IEEE1394_VERBOSEDEBUG is not set CONFIG_IEEE1394_OUI_DB=y CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y # CONFIG_IEEE1394_EXPORT_FULL_API is not set # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y # CONFIG_IEEE1394_VIDEO1394 is not set CONFIG_IEEE1394_SBP2=y CONFIG_IEEE1394_SBP2_PHYS_DMA=y # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_DV1394 is not set # CONFIG_IEEE1394_RAWIO is not set
-Andrew