match on wg packets and redirect
Hi,
I understand you're multiplexing kind of thought (like sslh), so I did some experiments with u32 module, and came up on this:
iptables -t nat -A PREROUTING -i eth0 \! -f -p udp \! --dport 51820 -m length --length 176 -m u32 --u32 "0 >> 22 & 0x3C @ 8 = 0x1000000" -j DNAT --to- destination :51820
I tested it on a server and it worked as expected. this way I intercept all wireguard initiator messages on all udp ports and redirect them to the listening (real) port of wireguard (51820); and because of DNAT, all follow-up packets get through as well. however, I didn't try having any other udp port open to test the actual "multiplexing". there is only packet length and first 4 bytes of udp payload check wich correspond to wireguard's initiator message (type 1).
Hope this would be useful to some people :))
P.S: I know that you don't need this stuff for your use case (there is no other udp port open on 443), but I thought it might be interesting to you.
_______________________________________________
WireGuard mailing list
[email protected]
https://lists.zx2c4.com/mailman/listinfo/wireguard