Skip to contentSkip to conversation

Is it possible to disable wireguard on specific Wi-Fi ?

DISCUSSION [email protected] 2 participants 2 messages Apr 22, 2022 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 77422@imapsync

#1 lore raw
Quoted 1 line · Nohk Two

 I guess there are something conflict because the vanilla IP network and the allowed IP network are the same.

Thats right, but you can simply use other IPs for your WG clients (192.168.187.0/24 or 172.16.0.0/24)

#2 lore raw
Quoted 6 lines · On 2022/4/22 17:29, [email protected] wrote:
Quoted 1 line · Nohk Two

 I guess there are something conflict because the vanilla IP network and the allowed IP network are the same.

Thats right, but you can simply use other IPs for your WG clients (192.168.187.0/24 or 172.16.0.0/24)

Hello,

I'm not sure if I understand your idea correctly.

It's not easy to configure my router's DHCP server to assign specific IP addresses (192.168.187.0/24 or 172.16.0.0/24) to the specific phones which connect to my LAN.

Even I did it eventually, the phones can't access to my LAN when the wireguard is turned off because "192.168.187.0/24 or 172.16.0.0/24" can't reach to my LAN (i.e. 192.168.87.0/24).

By the way, the WG tunnel interface's IP address (e.g. 192.168.19.0/24) is already different from my LAN's (i.e. 192.168.87.0/24).

Regards :)