controller case cpuset_load_balance failed
Xu
Hi ,
I am trying to run controller case cpuset_load_balance on my Linux version 5.5.0
with yocto. But I got many failures :
<<<test_start>>>
tag=cpuset_load_balance stime=1580819970 cmdline="cpuset_load_balance_test.sh"
contacts=""
analysis=exit
<<<test_output>>>cpuset_load_balance 1 TINFO: general group load balance test cpuset_load_balance 1 TINFO: root group info:cpuset_load_balance 1 TINFO: sched load balance: 0 cpuset_load_balance 1 TINFO: general group info:cpuset_load_balance 1 TINFO: cpus: -cpuset_load_balance 1 TINFO: sched load balance: 1 *cpuset_load_balance 1 TFAIL: load balance test failed.* cpuset_load_balance 3 TINFO: general group load balance test cpuset_load_balance 3 TINFO: root group info:cpuset_load_balance 3 TINFO: sched load balance: 0 cpuset_load_balance 3 TINFO: general group info:
.......cpuset_load_balance 25 TINFO: general group2 info:cpuset_load_balance 25 TINFO: cpus: 1,3 cpuset_load_balance 25 TINFO: sched load balance: 1 cpuset_load_balance 25 TINFO: CPU hotplug: online
smpboot: CPU 1 is now offline
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2 c*puset_load_balance 25 TFAIL: load balance test failed.* <<<execution_staLTP: starting cpuset_hotplug (cpuset_hotplug_test.sh) tus>>>
initiation_status="ok"
duration=410 termination_type=exited termination_id=1 corefile=no cutime=251 cstime=1188
<<<test_end>>>
And I tried to analyse the source code for the reason, but didn't get it.
That what I found with the file cpuset_load_balance_test.sh as below:
general_load_balance_test1()
{
........
??? # start to fork the child processes
*/****(line*:108) The fork works rightly */ *
??? /bin/kill -s SIGUSR1 $pid 2> $CPUSET_TMP/stderr ** ??? if [ $? -ne 0 ]; then
??? ??? cpuset_log_error $CPUSET_TMP/stderr
??? ??? tst_resm TFAIL "send the signal to fork the child tasks " \
??? ??? ??? ?? "failed."
??? ??? /bin/kill -s SIGKILL $pid
??? ??? return 1
??? fi
??? read fifo < ./myfifo
??? if [ $fifo -ne 0 ]; then
??? ??? cpuset_log_error $CPUSET_TMP/cpu-hog_stderr ??? ??? tst_resm TFAIL "forking test tasks failed" ??? ??? return 1
??? fi
??? # start to run the child processes
*/*(line:135)Something is wrong here. After the signal sent out, the child processes all become zombies*/*
??? /bin/kill -s SIGUSR1 $pid 2> $CPUSET_TMP/stderr
??? if [ $? -ne 0 ]; then
??? ??? cpuset_log_error $CPUSET_TMP/stderr
??? ??? tst_resm TFAIL "send the signal to run the child tasks " \
??? ??? ??? ?? "failed."
??? ??? /bin/kill -s SIGUSR2 $pid
??? ??? return 1
??? fi
*/*(line:143) Something is wrong here. wait returns value 1*/* wait $pid
...........
}
Then I saw the file cpuset_cpu_hog.c for the zombies proccess with gdb. It seems
cpuset_cpusetofpid func(line:190) failed. But I didn't konw more about these cpuset
func.
Have you met problems about cpuset_load_balance like this?
Thanks!
Yanfei,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20200221/b6453e3d/attachment-0001.htm>
Xu
Hello,
Process want to read from /dev/cpuset/cpuset.cpu_exclusive, but it get a wrong
filename that /dev/cpuset/cpu_exclusive in fact.
I wonder if the older version about /dev/cpuset/* are didn't have the "cpuset."
prefix? If that, the func cpuset_query() in *libcpuset.c*should be updated*.*
**
------------------------------*gdb messages*----------------------------------------------
load_flag (flag=0x562bdf3832ce "cpu_exclusive", flagp=0x562bdf393eb0 "",
??? path=0x7ffe615fc4c0 "/dev/cpuset") at libcpuset.c:2103
2103??? in libcpuset.c
(gdb) s
pathcat2 (buf=buf@entry=0x7ffe615fd4c0 "",
??? name1=name1@entry=0x7ffe615fc4c0 "/dev/cpuset",
??? name2=name2@entry=0x562bdf3832ce "cpu_exclusive", buflen=4096) ??? at libcpuset.c:492
492???? in libcpuset.c
(gdb) s
snprintf (__fmt=0x562bdf38342e "%s/%s", __n=4096, __s=0x7ffe615fd4c0 "")
??? at /usr/include/bits/stdio2.h:67
67????? /usr/include/bits/stdio2.h: No such file or directory. (gdb) s
pathcat2 (buf=buf@entry=0x7ffe615fd4c0 "/dev/cpuset/cpu_exclusive",
??? name1=name1@entry=0x7ffe615fc4c0 *"/dev/cpuset"*,
??? name2=name2@entry=0x562bdf3832ce *"cpu_exclusive"*, buflen=4096) ??? at libcpuset.c:493
493???? libcpuset.c: No such file or directory.
(gdb) s
*Value returned is $4 = 0x7ffe615fd4c0 "/dev/cpuset/cpu_exclusive"* (gdb) sread_flag (filepath=0x7ffe615fd4c0 "/dev/cpuset/cpu_exclusive",
??? flagp=0x562bdf393eb0 "") at libcpuset.c:921
921???? in libcpuset.c
(gdb) s
925???? in libcpuset.c
(gdb) s
*open (__oflag=0, __path=0x7ffe615fd4c0 "/dev/cpuset/cpu_exclusive")*
??? at /usr/include/bits/fcntl2.h:53
53????? /usr/include/bits/fcntl2.h: No such file or directory. (gdb) s
*open /dev/cpuset/cpu_exclusive failed. erro message=No such file or directory*
-----------------------*cpuset_query() func as below:*
-------------------------------
/* Set cpuset cp to the cpuset at location 'path' */ int cpuset_query(struct cpuset *cp, const char *relpath) {
??? char buf[PATH_MAX];
??? if (check() < 0)
??? ??? goto err;
??? fullpath(buf, sizeof(buf), relpath);
??? if (load_flag(buf, &cp->cpu_exclusive, "cpu_exclusive") < 0)
*/*should it be **"cpuset.cpu_exclusive"**???*/*
??? ??? goto err;
??? cp->cpu_exclusive_valid = 1;
??? if (load_flag(buf, &cp->mem_exclusive, "mem_exclusive") < 0)
*/*should it be **"cpuset.mem_exclusive"**???*/*
??? ??? goto err;
??? cp->mem_exclusive_valid = 1;
??? if (load_flag(buf, &cp->notify_on_release, "notify_on_release") < 0) ??? ??? goto err;
??? cp->notify_on_release_valid = 1;
??? if (exists_flag(buf, "memory_migrate")) {
??? ??? if (load_flag(buf, &cp->memory_migrate, "memory_migrate") < 0) ??? ??? ??? goto err;
??? ??? cp->memory_migrate_valid = 1;
??? }
??? if (exists_flag(buf, "mem_hardwall")) {
??? ??? if (load_flag(buf, &cp->mem_hardwall, "mem_hardwall") < 0) ??? ??? ??? goto err;
??? ??? cp->mem_hardwall_valid = 1;
??? }
........
Quoted 91 lines · Yanfei
Hi ,
I am trying to run controller case
cpuset_load_balanceon my Linux version 5.5.0with yocto. But I got many failures :
<<<
test_start>>>
tag=cpuset_load_balance stime=1580819970 cmdline="cpuset_load_balance_test.sh"
contacts=""
analysis=exit
<<<test_output>>>cpuset_load_balance1 TINFO: general group load balance testcpuset_load_balance1 TINFO: root group info:cpuset_load_balance1 TINFO: sched load balance: 0cpuset_load_balance1 TINFO: general group info:cpuset_load_balance1 TINFO: cpus: -cpuset_load_balance1 TINFO: sched load balance: 1*cpuset_load_balance1 TFAIL: load balance test failed.*cpuset_load_balance3 TINFO: general group load balance testcpuset_load_balance3 TINFO: root group info:cpuset_load_balance3 TINFO: sched load balance: 0cpuset_load_balance3 TINFO: general group info:
.......cpuset_load_balance25 TINFO: general group2 info:cpuset_load_balance25 TINFO: cpus: 1,3cpuset_load_balance25 TINFO: sched load balance: 1cpuset_load_balance25 TINFO: CPU hotplug: online
smpboot: CPU 1 is now offline
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC0x2c*puset_load_balance 25 TFAIL: load balance test failed.* <<<execution_staLTP: startingcpuset_hotplug(cpuset_hotplug_test.sh) tus>>>
initiation_status="ok"
duration=410 termination_type=exited termination_id=1 corefile=no cutime=251 cstime=1188
<<<test_end>>>And I tried to analyse the source code for the reason, but didn't get it.
That what I found with the file
cpuset_load_balance_test.shas below:
general_load_balance_test1()
{
........??? # start to fork the child processes */****(line*:108) The fork works rightly */ *
???
/bin/kill-s SIGUSR1 $pid 2> $CPUSET_TMP/stderr ** ??? if [ $? -ne 0 ]; then
??? ???cpuset_log_error$CPUSET_TMP/stderr
??? ???tst_resmTFAIL "send the signal to fork the child tasks " \
??? ??? ??? ?? "failed."
??? ???/bin/kill-s SIGKILL $pid
??? ??? return 1
??? fi??? read fifo < ./myfifo
??? if [ $fifo -ne 0 ]; then
??? ???cpuset_log_error$CPUSET_TMP/cpu-hog_stderr ??? ???tst_resmTFAIL "forking test tasks failed" ??? ??? return 1
??? fi??? # start to run the child processes */*(line:135)Something is wrong here. After the signal sent out, the child processes all become zombies*/*
???/bin/kill-s SIGUSR1 $pid 2> $CPUSET_TMP/stderr
??? if [ $? -ne 0 ]; then
??? ???cpuset_log_error$CPUSET_TMP/stderr
??? ???tst_resmTFAIL "send the signal to run the child tasks " \
??? ??? ??? ?? "failed."
??? ???/bin/kill-s SIGUSR2 $pid
??? ??? return 1
??? fi
*/*(line:143) Something is wrong here. wait returns value 1*/* wait $pid
...........
}Then I saw the file
cpuset_cpu_hog.cfor the zombies proccess with gdb. It seems
cpuset_cpusetofpidfunc(line:190) failed. But I didn't konw more about these cpuset
Quoted 10 lines
func.
Have you met problems about
cpuset_load_balancelike this?Thanks!
Yanfei,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linux.it/pipermail/ltp/attachments/20200224/70ebffd4/attachment.htm>