Replacing a legacy uml-switch with bess
Hi everyone,
I currently maintain a project called Netkit which facilitates network simulation using UML machines. This project is quite old and we've been working on upgrading it to a modern codebase.
Netkit relies on using uml_net for communication between the machines. It uses the legacy uml_switches to create hubs that connect to the machine, using the old ethX command line parameters. For example:
/home/josh/netkit-kernel --eth0=daemon,,,/home/josh/.netkit/vhub_Internet.cnct
where the vhub_Internet.cnct is the uml_switch socket. We're looking to upgrade this to use the new vector networking to utilize the better performance and remove legacy code that could break on a kernel update.
I've been looking at the linux kernel documentation that discusses using the Bess switch software to provide networking between UML machines.
(https://github.com/torvalds/linux/blob/master/Documentation/virt/uml/user_mode_linux_howto_v2.rst#bess-socket-transport)
However, I can't find any good examples of using Bess with UML and was wondering whether anyone on the mailing list has any advice/examples.
I noted that Anton had submitted a PR to Bess to improve UML support and I was wondering whether this means that the build without this patch would not work with UML at all.
https://github.com/NetSys/bess/pull/1022
Hopefully someone may be able to point me in the right direction on handling uml_switch removal!
Thanks,
Josh
_______________________________________________
linux-um mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-um
Anton Ivanov
maintainerQuoted 24 lines · Joshua Hawking
Hi everyone,
I currently maintain a project called Netkit which facilitates network simulation using UML machines. This project is quite old and we've been working on upgrading it to a modern codebase.
Netkit relies on using
uml_netfor communication between the machines. It uses the legacyuml_switchesto create hubs that connect to the machine, using the old ethX command line parameters. For example:
/home/josh/netkit-kernel--eth0=daemon,,,/home/josh/.netkit/vhub_Internet.cnctwhere the vhub_Internet.cnct is the
uml_switchsocket. We're looking to upgrade this to use the new vector networking to utilize the better performance and remove legacy code that could break on a kernel update.I've been looking at the linux kernel documentation that discusses using the Bess switch software to provide networking between UML machines.
(https://github.com/torvalds/linux/blob/master/Documentation/virt/uml/user_mode_linux_howto_v2.rst#bess-socket-transport)However, I can't find any good examples of using Bess with UML and was wondering whether anyone on the mailing list has any advice/examples.
Quoted 8 lines
I noted that Anton had submitted a PR to Bess to improve UML support and I was wondering whether this means that the build without this patch would not work with UML at all.
https://github.com/NetSys/bess/pull/1022
Hopefully someone may be able to point me in the right direction on handling
uml_switchremoval!
It will, but you need a fairly complex pipeline.
Basically, BESS replicator module which you need for BCAST/MCAST as well as flooding does not have a reflection check.
So f.e. 3 ports wired to a Replicator will not work.
As a result you cannot implement a simple shared switch and have to do a fully featured per-port pipeline with "drop to slow path for learning", implicit reflection checks, etc.
The workaround would be to have
inPort->L2Forwarding->Replicator
chain for each port and ensure that the Replicator is wired only to other ports in the same VLAN.
A.
Quoted 12 lines
Thanks,
Josh
_______________________________________________
linux-um mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-um
Signature · 8 lines
Anton R. Ivanov Cambridgegreys Limited. Registered in England. Company Number 10273661 https://www.cambridgegreys.com/ _______________________________________________ linux-um mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-um