RDMA/mlx5: issue with error checking
Subsystems (2)
Hi
Static analysis detected an issue with the following commit:
commit e73242aa14d2ec7f4a1a13688366bb36dc0fe5b7
Author: Edward Srouji <[email protected]> Date: Wed Jul 9 09:42:11 2025 +0300
RDMA/mlx5: Optimize DMABUF mkey page size
The issue is as follows:
int mlx5r_umr_dmabuf_update_pgsz(struct mlx5_ib_mr *mr, u32 xlt_flags,
unsigned int page_shift)
{
unsigned int old_page_shift = mr->page_shift;
size_t zapped_blocks;
size_t total_blocks;
int err;
zapped_blocks = _mlx5r_umr_zap_mkey(mr, xlt_flags, page_shift,
mr->data_direct);
if (zapped_blocks < 0)
return zapped_blocks;The variable zapped_blocks is a size_t type and is being assigned a int return value from the call to _mlx5r_umr_zap_mkey. Since zapped_blocks is an unsigned type, the error check for zapped_blocks < 0 will never be true. I suspect total_blocks should be a ssize_t type, but that probably also means total_blocks should be ssize_t too, but don't have the hardware to test this fix and I'm concerned that this change may break the code. Hence I'm reporting this issue.
Colin
Quoted 26 lines · Colin King (gmail)
Hi
Static analysis detected an issue with the following commit:
commit
e73242aa14d2ec7f4a1a13688366bb36dc0fe5b7Author: Edward Srouji <[email protected]> Date: Wed Jul 9 09:42:11 2025 +0300RDMA/mlx5: Optimize DMABUF mkey page size
The issue is as follows:
int mlx5r_umr_dmabuf_update_pgsz(struct
mlx5_ib_mr*mr, u32xlt_flags,
unsigned intpage_shift){ unsigned int old_page_shift = mr->page_shift; size_t zapped_blocks; size_t total_blocks; int err; zapped_blocks = _mlx5r_umr_zap_mkey(mr, xlt_flags, page_shift, mr->data_direct); if (zapped_blocks < 0) return zapped_blocks;
Quoted 7 lines
The variable
zapped_blocksis asize_ttype and is being assigned a int return value from the call to_mlx5r_umr_zap_mkey. Sincezapped_blocksis an unsigned type, the error check forzapped_blocks< 0 will never be true. I suspecttotal_blocksshould be assize_ttype, but that probably also meanstotal_blocksshould bessize_ttoo, but don't have the hardware to test this fix and I'm concerned that this change may break the code. Hence I'm reporting this issue.
Thanks for the report, this will probably fix it.
drivers/infiniband/hw/mlx5/umr.c +14 -14
@@ -996,6 +996,7 @@ _mlx5r_dmabuf_umr_update_pas(struct mlx5_ib_mr *mr, unsigned int flags,static int _mlx5r_umr_zap_mkey (struct mlx5_ib_mr *mr,unsigned int flags,unsigned int page_shift, +size_t *nblocks,bool dd) {unsigned int old_page_shift = mr->page_shift;
@@ -1004,7 +1005,6 @@ static int _mlx5r_umr_zap_mkey(struct mlx5_ib_mr *mr,size_t page_shift_nblocks;unsigned int max_log_size;int access_mode; -size_t nblocks;int err; access_mode = dd ?MLX5_MKC_ACCESS_MODE_KSM :MLX5_MKC_ACCESS_MODE_MTT ;
@@ -1018,26 +1018,26 @@ static int _mlx5r_umr_zap_mkey(struct mlx5_ib_mr *mr,* Block size must be aligned to MLX5_UMR_FLEX_ALIGNMENT since it may * be used as offset into the XLT later on. */ - nblocks =ib_umem_num_dma_blocks (mr->umem,1UL << max_page_shift); + *nblocks =ib_umem_num_dma_blocks (mr->umem,1UL << max_page_shift);if (dd) - nblocks =ALIGN (nblocks,MLX5_UMR_KSM_NUM_ENTRIES_ALIGNMENT ); + *nblocks =ALIGN (*nblocks,MLX5_UMR_KSM_NUM_ENTRIES_ALIGNMENT );else - nblocks =ALIGN (nblocks,MLX5_UMR_MTT_NUM_ENTRIES_ALIGNMENT ); + *nblocks =ALIGN (*nblocks,MLX5_UMR_MTT_NUM_ENTRIES_ALIGNMENT ); page_shift_nblocks =ib_umem_num_dma_blocks (mr->umem,1UL << page_shift);/* If the number of blocks at max possible page shift is greater than * the number of blocks at the new page size, we should just go over the * whole mkey entries. */ -if (nblocks >= page_shift_nblocks) - nblocks =0 ; +if (*nblocks >= page_shift_nblocks) + *nblocks =0 ;/* Make the first nblocks entries non-present without changing * page size yet. */ -if (nblocks) +if (*nblocks) mr->page_shift = max_page_shift; - err =_mlx5r_dmabuf_umr_update_pas (mr, flags,0 , nblocks, dd); + err =_mlx5r_dmabuf_umr_update_pas (mr, flags,0 , *nblocks, dd);if (err) { mr->page_shift = old_page_shift;return err;
@@ -1046,7 +1046,7 @@ static int _mlx5r_umr_zap_mkey(struct mlx5_ib_mr *mr,/* Change page size to the max page size now that the MR is completely * non-present. */ -if (nblocks) { +if (*nblocks) { err =mlx5r_umr_update_mr_page_shift (mr, max_page_shift, dd);if (err) { mr->page_shift = old_page_shift;
@@ -1054,7 +1054,7 @@ static int _mlx5r_umr_zap_mkey(struct mlx5_ib_mr *mr, } } -return err ? err : nblocks; +return 0 ; }/**
@@ -1089,10 +1089,10 @@ int mlx5r_umr_dmabuf_update_pgsz(struct mlx5_ib_mr *mr, u32 xlt_flags,size_t total_blocks;int err; - zapped_blocks =_mlx5r_umr_zap_mkey (mr, xlt_flags, page_shift, - mr->data_direct); -if (zapped_blocks <0 ) -return zapped_blocks; + err =_mlx5r_umr_zap_mkey (mr, xlt_flags, page_shift, &zapped_blocks, + mr->data_direct); +if (err) +return err;/* _mlx5r_umr_zap_mkey already enables the mkey */ xlt_flags &= ~MLX5_IB_UPD_XLT_ENABLE ;
Quoted 4 lines
Colin