Add support for Generic PHY in macb
PATCH 1/1 Add support for Generic PHY in macb
Hi,
----- Messaggio originale -----
Quoted 22 lines
Da: Haavard Skinnemoen <[email protected]>
A: Michael Trimarchi <[email protected]>
Cc: michael <[email protected]>; u-boot-users at lists.sourceforge.net
Inviato: Venerd? 22 febbraio 2008, 13:52:09
Oggetto: Re: [U-Boot-Users] [PATCH] Add support for Generic PHY in macbQuoted 3 lines · On Fri, 22 Feb 2008 12:27:48 +0000 (GMT) Michael Trimarchi wrote:
When I read to my id u-boot report
0xffffand fail, but the device works pretty well skipping this testing. If I remember linux report the same issue.Is the MII address of your PHY set correctly?
All MII-capable PHYs should have a working PHYSID1 register. If it doesn't, something is broken.
So I think the
CONFIG_GENERIC_PHYname is misleading -- the test is generic enough as is.CONFIG_BROKEN_PHYwould be better, if there's really no way to get your PHY to behave.
Quoted 7 lines
But note that if MDIO communication isn't working, autonegotiation won't work, and the speed and duplex settings will most likely be wrong. So I don't think simply #ifdefing out that sanity check is really going to solve any problems.
Haavard
Yes I know but this is the situation:
- dm9161a
- at91sam9260
When I try to read at phy id it reports 0xffff and linux too. I suppose that can be related to a broken phy. But seems to be broken on this read. I think that you have more experience, do you have an idea?
Regards Michael
___________________________________
L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html