Skip to contentSkip to conversation

bttv & 2.5.48

PATCH Petr Vandrovec 2 participants 2 messages Nov 19, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 10 lines · Javier Marcet

drivers/media/video/bttv-cards.c: In function AUDC_CONFIG_PINNACLE' undeclared (first use in this function) drivers/media/video/bttv-cards.c:1742: (Each undeclared identifier is reported only once drivers/media/video/bttv-cards.c:1742: for each function it appears in.) drivers/media/video/bttv-cards.c: In function name'
make[4]: *** [drivers/media/video/bttv-cards.o] Error 1
make[3]: *** [drivers/media/video] Error 2
make[2]: *** [drivers/media] Error 2
make[1]: *** [drivers] Error 2
make: *** [modules] Error 2

Quoted 5 lines

I know this has not changed since 2.5.47, nor couldn't spot any difference within the /media tree, yet it fails on 2.5.48 while it compiled fine on 2.5.47

Any idea where the error might be?

I just commented out that offending line, as I do not have Pinnacle, so it should be never executed ;-)

If you have Pinnacle, then you'll have to get tda9887 driver somewhere. This driver defines AUD_CONFIG_PINNACLE (as far as I can tell from missing pieces...).

AFAIK bttv driver at http://bytesex.org/bttv has this fixed.
Best regards,
Petr Vandrovec [email protected]

#1 lore raw
Quoted 10 lines · Petr Vandrovec
Quoted 10 lines

drivers/media/video/bttv-cards.c: In function AUDC_CONFIG_PINNACLE' undeclared (first use in this function) drivers/media/video/bttv-cards.c:1742: (Each undeclared identifier is reported only once drivers/media/video/bttv-cards.c:1742: for each function it appears in.) drivers/media/video/bttv-cards.c: In function name'
make[4]: *** [drivers/media/video/bttv-cards.o] Error 1
make[3]: *** [drivers/media/video] Error 2
make[2]: *** [drivers/media] Error 2
make[1]: *** [drivers] Error 2
make: *** [modules] Error 2

Quoted 8 lines
Quoted 5 lines

I know this has not changed since 2.5.47, nor couldn't spot any difference within the /media tree, yet it fails on 2.5.48 while it compiled fine on 2.5.47

Any idea where the error might be?

I just commented out that offending line, as I do not have Pinnacle, so it should be never executed ;-)

That's the first thing I did, but how's that it compiled fine in 2.5.47 if nothing changed?

Quoted 3 lines

If you have Pinnacle, then you'll have to get tda9887 driver somewhere. This driver defines AUD_CONFIG_PINNACLE (as far as I can tell from missing pieces...).

It's one of the two cards I have but I'm not have it plugged it ATM.

Signature · 1 line
Javier Marcet <[email protected]>