Patch pushed but don't see in the mailing list
Hi Team ,
I have pushed an patch in meta-openembedded layer .
But don't see it in mailing list .
Can member please help me where should i look for the patch submitted and whats the status
Thanks ,
Ashish
Below is the console log for the patch submitted:
~/yocto-upstream/layers/meta-openembedded (remove-raw-image) : *git send-email --to [email protected] --cc [email protected] 0001-meta-oe-image-optionally-remove-RAW-image-after-spar.patch* *0001-meta-oe-image-optionally-remove-RAW-image-after-spar.patch*
(mbox) Adding cc: AshishKumar Mishra <[email protected]> from line 'From: AshishKumar Mishra <[email protected]>'
(body) Adding cc: AshishKumar Mishra <[email protected]> from line 'Signed-off-by: AshishKumar Mishra <[email protected]>'
From: AshishKumar Mishra
To: [email protected]
Cc: [email protected],
AshishKumar Mishra <[email protected]>
Subject: [PATCH] meta-oe: image: optionally remove RAW image after sparse image creation
Date: Sun, 14 Sep 2025 20:49:50 +0530
Message-ID: <[email protected]>
X-Mailer: git-send-email 2.43.0
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
The Cc list above has been expanded by additional
addresses found in the patch commit message. By default
send-email prompts before sending whenever this occurs.
This behavior is controlled by the sendemail.confirm
configuration setting.
For additional information, run 'git send-email --help'.
To retain the current behavior, but squelch this message,
run 'git config --global sendemail.confirm auto'.
Send this email? ([y]es|[n]o|[e]dit|[q]uit|[a]ll): yes
Password for 'smtp://emailaddress.ashish%[email protected]:587':
OK. Log says:
Server: smtp.gmail.com
Use of uninitialized value $raw_from in concatenation (.) or string at /usr/lib/git-core/git-send-email line 1681.
MAIL FROM:<>
RCPT TO:<[email protected]>
RCPT TO:<[email protected]>
RCPT TO:<[email protected]>
From: AshishKumar Mishra
To: [email protected]
Cc: [email protected],
AshishKumar Mishra <[email protected]>
Subject: [PATCH] meta-oe: image: optionally remove RAW image after sparse image creation
Date: Sun, 14 Sep 2025 20:49:50 +0530
Message-ID: <[email protected]>
X-Mailer: git-send-email 2.43.0
MIME-Version: 1.0
*Content-Transfer-Encoding: 8bit*
*Result: 250*
Quoted 9 lines · Ashish Mishra via lists.openembedded.org
Hi Team ,
I have pushed an patch in meta-openembedded layer .
But don't see it in mailing list .
Can member please help me where should i look for the patch submitted and whats the statusThanks ,
Ashish
Hi Ashish,
I can see your message here:
https://lists.openembedded.org/g/openembedded-devel/message/119396
Maybe it had to be manually validated by a moderator?
Thanks,
Mathieu
Signature · 3 lines
Mathieu Dubois-Briand, Bootlin Embedded Linux and Kernel engineering https://bootlin.com