Skip to contentSkip to conversation

sending ICMP messages in kernel module

DISCUSSION rajat swarup 2 participants 3 messages May 7, 2005

lore
Share & tools
lore
#0 lore raw

Hi,
I have placed a netfilter hook in which I grab the packets in the pre-routing stage.
I need to send ICMP messages in response to certain messages in this hook. I looked at alloc_skb(), skb_reserve() and skb_put() functions but it is still not clear to me as to how to construct the packets using these methods.
Since I am getting the packets in the Pre-routing stage should I explicitly construct the MAC header, IP header & data & ICMP message? Also, I'll need to calculate the checksum to be transmitted in the ICMP packet...which method could I use to do that?

Any help will be really appreciated!

Thanks and regards,
Rajat.
http://rajatswarup.blogspot.com/

#1 lore raw
Quoted 13 lines · rajat swarup

Hi,
I have placed a netfilter hook in which I grab the packets in the pre-routing stage.
I need to send ICMP messages in response to certain messages in this hook. I looked at alloc_skb(), skb_reserve() and skb_put() functions but it is still not clear to me as to how to construct the packets using these methods.
Since I am getting the packets in the Pre-routing stage should I explicitly construct the MAC header, IP header & data & ICMP message? Also, I'll need to calculate the checksum to be transmitted in the ICMP packet...which method could I use to do that?

Hello,

I had a similar problem once. In the icmp.c file, look at how the ping echo reply works. That is as close to a tutorial as you will find in the code. I think you might find it strait forward from there.

-Scott-

#2 lore raw
Quoted 16 lines · J. Scott Kasten
Quoted 12 lines · rajat swarup

I have placed a netfilter hook in which I grab the packets in the pre-routing stage.
I need to send ICMP messages in response to certain messages in this hook. I looked at alloc_skb(), skb_reserve() and skb_put() functions but it is still not clear to me as to how to construct the packets using these methods.
Since I am getting the packets in the Pre-routing stage should I explicitly construct the MAC header, IP header & data & ICMP message? Also, I'll need to calculate the checksum to be transmitted in the ICMP packet...which method could I use to do that?

Quoted 4 lines

I had a similar problem once. In the icmp.c file, look at how the ping echo reply works. That is as close to a tutorial as you will find in the code. I think you might find it strait forward from there.

Hi Scott,
I am trying to send ICMP messages but not in reply to anything else. We have to generate ICMP messages from scratch.
So we do not have access to an existing sk_buff structure that has all the parameters already set.
icmp_echo(struct skbuff*) assumes that you already have the sk_buff structure and you are just assigning a few more fields.
Do you have an idea about how can we create ICMP messages from scratch?

Thanks for the help!

-Rajat.
http://rajatswarup.blogspot.com/