Skip to contentSkip to conversation

: Gain control for M-Audio Revolution (and other ice1724 cards) needed

ALSA - driver 0001187 [email protected] 1 participant 1 message Jun 21, 2005

lore
Share & tools
lore
#0 lore raw

The following issue has been set as DUPLICATE OF issue 0001096.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1187>
======================================================================
Reported By: sst4
Assigned To:
======================================================================

Project:                    ALSA - driver
Issue ID:                   1187
Category:                   PCI - ice1724
Reproducibility:            always
Severity:                   feature
Priority:                   normal
Status:                     new
Distribution:               Mandriva
Kernel Version:             2.6.11
======================================================================
Date Submitted:             06-12-2005 15:51 CEST
Last Modified:              06-22-2005 01:49 CEST

======================================================================
Summary: Gain control for M-Audio Revolution (and other
ice1724 cards) needed
Description:
Hello,

this is in a sense continuation of

https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1164
.

Yes, I remember Takashi's statement that the ADC chip on the card does not
have gain control, and I checked the ADC specs and it's indeed so.

However, this doesn't mean the functionality can not be implemented.

I believe it should be implemented for at least two reasons:

1) Windows driver has it;
2) Applications like "Skype" need it to implement AGC (automatic gain control)
in software.

Regarding 2) - I clearly hear while talking through "Skype" that gain on the other party's side increases (room noise pickup is becoming more and more
evident) when the other party makes a pause in conversation.

Regarding 1) - in

http://m-audio.com/images/en/manuals/Revo71-Manual-EN.pdf

file on page number 14, under "Line and Mic In" one can read:

"
You can set the INPUT LEVEL of the Line and Mic inputs on the Input/Other tab of th
Revolution 7.1 control panel. See the Control Panel section for more details.
"
(capitalization by me).

On page number 22 of the same file, under "Input/Other Tab":

"
The Input/Other tab controls the INPUT LEVELS and sampling frequency of the
Revolution. You don't need to worry about the settings on this page unless you're
recording audio with the Revolution.
Link Stereo Input Levels - The Input/Other tab controls the INPUT LEVELS and
sampling frequency of the Revolution. You don't need to worry about the settings
on this page unless you're recording audio with the Revolution. "
(capitalization by me).

On page number 25 under "Recording":

"
The Revolution 7.1 includes a pair of audio inputs for recording. You can set the
INPUT LEVEL of the inputs by launching the Revolution 7.1 control panel, selecting
the Input/Other tab, and changing the level on that screen. If your recording
application doesn't see audio from the Revolution's inputs, check that program's
audio preferences, check your cable connections, or review the Software Setup
chapter for potential problems. Go to the Windows Control panel and open Sounds and Multimedia icon. The Revolution 7.1 features both Line and Mic inputs for the best performance with your input source. The Revolution 7.1
records at sampling rates up to and including 96kHz.
"
(capitalization by me).

The "Input/Other" tab in its non-selected form can be seen on the picture on page 20 - to see it more clearly I had to choose 400% zoom in 'xpdf'.

Regarding feasibility.

First of all, gain can be changed by multiplying the code by the gain value.

If I remember correctly, in ALSA the card outputs audio data in 32 bit format,
of the 32 bits only 24 bits are significant because that's what the ADC produces, so we have 8 spare bits, which means 256 times, or about 48dB gain
control without even losing precision.

General note on priority of implementing the feature.

Though I believe the feature is needed, and not only for Revolution 7.1, but
also for other ICE1724-based cards, please understand the following:

*** I still have no capture with my Revolution 7.1 (issue
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=0001096) *** .

Since I'm not getting it work, I've been trying to use ALSA utilities ('amixer',
'alsamixer', 'aoss') - "trial and error" approach - to make it work, and have
found other problems on the way.

Resolution of these other problem, including introduction of gain control,
will not solve my main problem - lack of capture.

I would appreciate getting an answer to the question in

https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1096 :

"
Maybe my previous question does not contain enough details.

Here is the rephrased question:

Running 'amixer' with this command line

amixer cget numid=<number>

, where <number is in 5..12 range, I see output like this:

"
; type=ENUMERATED,access=rw---,values=1,items=5
; Item 0 'PCM Out'
; Item 0000001 'H/W In 0'
; Item 0000002 'H/W In 1'
; Item 0000003 'IEC958 In L'
; Item 0000004 'IEC958 In R'
: values=0
".

Can any of these controls be related to enabling capture ?

Thanks,
Sergei.
".

Or, to be more precise, getting an answer to the question in general:
"How
to enable capture in M-Audio Revolution 7.1 ?".

Thanks,
Sergei.

======================================================================
Relationships ID Summary
----------------------------------------------------------------------
duplicate of 0001096 no capture with M-Audio Revolution 7.1
======================================================================

----------------------------------------------------------------------
tiwai - 06-15-05 15:26
----------------------------------------------------------------------
Clearly this is the problem of application. Why the _kernel_ driver bothers to implement an emulation _on software_ which doesn't exist? Note that if Skype is running on ALSA, it'd be more easily solved.

The input selection of line-in and mic is unknown thing - i.e. we have no technical information about this feature at all. Sorry, impossible to ipmlement now. For improving this, please ask M-Audio to provide this particular information.

----------------------------------------------------------------------
sst4 - 06-20-05 01:05
----------------------------------------------------------------------
Regarding

"
Why the _kernel_ driver bothers to implement an emulation _on software_ which doesn't exist?
"

- I do not know what's the best way to do this.

Windows "package" (driver + GUI) has it, so ALSA should have it too it wants
to meaningfully compete with Windows.

By the way, probably capture stream is routed through DSP of Envy24HT chip,
and maybe DSP is capable of doing the required multiplication by gain value ?

----------------------------------------------------------------------
tiwai - 06-21-05 12:55
----------------------------------------------------------------------
ALSA can support this in alsa-lib. It's just a matter of configuration, and I gave an example configuration already in another bug issue.

The only problem is OSS emulation, especially thourhg kernel. In this route, we won't support such a thing in the kernel context. Rather use aoss instead.

And yes, the stream from line-in might be routed to RDMA1. IIRC, the mic-in can be recorded normally through RMDA0 on revo 7.1 (or vice versa?)

Issue History
Date Modified Username Field Change
======================================================================

06-12-05 15:51 sst4           New Issue                                    
06-12-05 15:51 sst4           Distribution              => Mandriva        
06-12-05 15:51 sst4           Kernel Version            => 2.6.11          
06-15-05 15:26 tiwai          Note Added: 0005032                          
06-16-05 14:59 perex          Relationship added       related to 0001096  
06-20-05 01:05 sst4           Note Added: 0005091                          
06-21-05 12:55 tiwai          Note Added: 0005109                          
06-22-05 01:49 rlrevell       Relationship replaced    duplicate of 0001096

======================================================================

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click