Skip to contentSkip to conversation

IDE: Implement SEEK command (resend)

PATCH Applied Justin Chevrier 2 participants 2 messages Dec 10, 2008

lore
Share & tools
lore

Justin Chevrier

author
#0 lore raw

PATCH 1/1 IDE: Implement SEEK command (resend)

Resend original patch with correct Signed-off-by. Original text below.

Openserver issues a SEEK command during initial drive detection. It refuses to report the hard drive if this command fails. This patch gets Openserver to list the hard drive but installation still fails (freezes) later on due to an unrelated IDE issue (patch on its way).

Justin

Changelog:

Implement SEEK command

Signed-off-by Justin Chevrier <[email protected]>
ide.c (working copy) renamed from ide.c (revision 5948) +7 -0
Index: hw/ide.c
===================================================================
@@ -2324,6 +2324,13 @@
             s->status = READY_STAT;
             ide_set_irq(s);
             break;
+        case WIN_SEEK:
+            if(s->is_cdrom)
+                goto abort_cmd;
+            /* XXX: Check that seek is within bounds */
+            s->status = READY_STAT | SEEK_STAT;
+            ide_set_irq(s);
+            break;
             /* ATAPI commands */
         case WIN_PIDENTIFY:
             if (s->is_cdrom) {
Applied
#1 lore raw
Quoted 5 lines · Justin Chevrier

Resend original patch with correct Signed-off-by. Original text below.

Openserver issues a SEEK command during initial drive detection. It refuses to report the hard drive if this command fails. This patch gets Openserver to list the hard drive but installation still fails (freezes) later on due to an unrelated IDE issue (patch on its way).

Quoted 7 lines

Justin

Changelog:

Implement SEEK command

Signed-off-by Justin Chevrier <[email protected]>

Thanks, applied.

Quoted 24 lines

Index: hw/ide.c
===================================================================

ide.c (working copy) renamed from ide.c (revision 5948) +7 -0
@@ -2324,6 +2324,13 @@
             s->status = READY_STAT;
             ide_set_irq(s);
             break;
+        case WIN_SEEK:
+            if(s->is_cdrom)
+                goto abort_cmd;
+            /* XXX: Check that seek is within bounds */
+            s->status = READY_STAT | SEEK_STAT;
+            ide_set_irq(s);
+            break;
             /* ATAPI commands */
         case WIN_PIDENTIFY:
             if (s->is_cdrom) {
Signature · 4 lines
  .''`.  Aurelien Jarno	            | GPG: 1024D/F1BCDB73
 : :' :  Debian developer           | Electrical Engineer
 `. `'   [email protected]         | [email protected]
   `-    people.debian.org/~aurel32 | www.aurel32.net