serial console _after_ boot ? - was: Redirect kernel console
fantastic, thanks!
unfortunately......
opensuse103:/home/roland/serialcons # ./mytioccons
ioctl: Device or resource busy
but, it`s not userspace:
opensuse103:/home/roland # lsof |egrep "console|ttyS0" opensuse103:/home/roland #
in tty_io.c -> ticoccons() there is
if (redirect) {
spin_unlock(&redirect_lock);
return -EBUSY;
}but i`m not deep enough into programming to understand this.
-------------------mytioccons.c
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <fcntl.h>
#include <libio.h>
#include <errno.h>
#include <stdio.h>
int main(void)
{
int fd = open("/dev/ttyS0", O_RDWR);
int errno;
ioctl(0, TIOCCONS, NULL);
if (ioctl(fd, TIOCCONS, NULL) < 0)
printf("ioctl: %s\n", strerror(errno));
}-------------------
Quoted 31 lines
-----Ursprüngliche Nachricht-----
Von: "Jan Engelhardt" <[email protected]>
Gesendet: 03.01.08 14:28:45
An: [email protected]
CC: [email protected]
Betreff: Re: serial console _after_ boot ? - was: Redirect kernel consoleQuoted 4 lines · On Jan 3 2008 13:43, [email protected] wrote:
hi !
i was wondering how to make kernel messages appear on
/dev/ttyS0without a reboot, i.e. kernelparam "console=ttyS0"The solution is simple... the following piece of code is inside opensuse-10.3/src/sysvinit-2.86-115.src.rpm#showconsole-1.08.tar.bz2#showconsole-1.08/blogd.c
(void)ioctl(0, TIOCCONS, NULL); /* Undo any current map if any */ if (
ioctl(pts, TIOCCONS, NULL)< 0)
error("can not set console device to %s: %s\n", ptsname, strerror(errno));so I suppose that's it. Write up a new program that calls the ioctl on a tty, and you should be done. IOW:
#include <
sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <fcntl.h>
Quoted 7 lines
int main(void)
{ int fd = open("/dev/ttyS0", O_RDWR); ioctl(0, TIOCCONS, NULL); ioctl(fd, TIOCCONS, NULL); }
__________________________________________________________________________
Erweitern Sie FreeMail zu einem noch leistungsstärkeren E-Mail-Postfach! Mehr Infos unter http://produkte.web.de/club/?mc=021131
Quoted 7 lines · On Jan 3 2008 15:39, [email protected] wrote:
fantastic, thanks!
unfortunately......
opensuse103:/home/roland/serialcons # ./mytioccons
ioctl: Device or resource busy
Quoted 7 lines
but i`m not deep enough into programming to understand this.
int main(void)
{
int fd =open("/dev/ttyS0", O_RDWR);
int errno;
This errno is so out of place.
Quoted 6 lines
ioctl(0, TIOCCONS, NULL);if (
ioctl(fd, TIOCCONS, NULL)< 0)printf("ioctl: %s\n", strerror(errno)); }