Skip to contentSkip to conversation

crownbay: patches for 2.6.37

PATCH In review Tom Zanussi 2 participants 2 messages Mar 30, 2011

lore
Share & tools
lore
#0 lore raw

cover crownbay: patches for 2.6.37

From: Tom Zanussi <[email protected]>

This is a large patchset that reflects a lot of post-2.6.37 activity but that we need for the crownbay 2.6.37 upgrade.

Due to the large number, the patches themselves aren't posted here - please see the branch for those.

Please pull.

Pull URL: git://git.pokylinux.org/linux-yocto-2.6.37-contrib.git
Branch: tzanussi/crownbay-2.6.37-machine
Browse: http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=tzanussi/crownbay-2.6.37-machine

Axel Lin (1):
drivers/misc/pch_phub.c: add MODULE_DEVICE_TABLE

Denis Turischev (1):
pch_uart: reference clock on CM-iTC

Jesper Juhl (1):
serial, pch uart: Remove duplicate inclusion of linux/pci.h header

Justin P. Mattock (1):
spi/topcliff: Typo fix threhold to threshold

Michał Mirosław (1):
net: Fix too optimistic NETIF_F_HW_CSUM features

Rakib Mullick (1):
drivers, pch_dma: Fix warning when CONFIG_PM=n.

Richard Röjfors (2):
usb: pch_udc: Fix compile error, warnings and checkpatch warnings
usb: pch_udc: Fix setup transfers with data out

Tejun Heo (1):
pch_gbe: don't use flush_scheduled_work()

Tom Zanussi (4):
pch_uart: move to drivers/tty/serial/
From 5ac387d983149d4658aad17242d24eef85a43fa8 Mon Sep 17 00:00:00
2001 From: Randy Dunlap <[email protected]> Date: Thu, 2 Dec 2010 09:19:48 -0800 Subject: [PATCH] serial: fix pch_uart kconfig & build
commit 1c5189976ffc130416e808f41049c12615a6380c Author: Tomoya

    MORINAGA <[email protected]> Date: Thu Dec 16 16:13:29
    2010 +0900

From 89bf67f1f080c947c92f8773482d9e57767ca292 Mon Sep 17 00:00:00
2001 From: Eric Dumazet <[email protected]> Date: Mon, 22 Nov 2010 00:15:06 +0000 Subject: [PATCH] drivers/net: use vzalloc()

Tomoya (30):
can: EG20T PCH: add prefix to macro
can: EG20T PCH: use BIT(X)
can: EG20T PCH: Separate Interface Register(IF1/IF2)
can: EG20T PCH: Change Message Object Index
can: EG20T PCH: Enumerate LEC macros
can: EG20T PCH: Delete unnecessary spin_lock
pch_can: Add flow control processing
pch_can: Divide poll function
pch_can: Fix endianness issue
pch_can: Improve rx processing
pch_can: Fix warnings
pch_can: Rename function/macro name
pch_can: Change functions type
pch_can: Reduce register access
pch_can: Change Copyright and module description
pch_can: Replace netdev_dbg instead of dev_dbg partly
pch_can: Fix coding rule violation
pch_can: Delete unnecessary/redundant code
pch_can: Fix bit timing calculation issue
pch_can: Fix miss-setting status issue
pch_can: Comment optimization
pch_can: Move MSI processing to probe/remove processing
pch_can: Fix incorrect return processing
pch_can: Optimize "if" condition in rx/tx processing
pch_can: Add setting TEC/REC statistics processing
pch_can: Replace netif_rx to netif_receive_skb
pch_can: Fix array miss-pointing issue
pch_can: fix 800k comms issue
pch_can: fix rmmod issue
pch_can: fix module reload issue with MSI

Tomoya MORINAGA (20):
pch_can: fix tseg1/tseg2 setting issue
pch_phub: add new device ML7213
Serial: EG20T: add PCH_UART driver
serial: pch_uart: support new device ML7213
pch_uart: add multi-scatter processing
pch_uart: add spin_lock_init
pch_uart : Reduce memcpy
pch_uart : Use dev_xxx not pr_xxx
pch_uart: fix uart clock setting issue
pch_uart: fix auto flow control miss-setting issue
pch_uart: fix exclusive access issue
pch_uart: Fix DMA channel miss-setting issue.
serial: pch_uart: revert Kconfig for non-DMA mode
pch_dma: support new device ML7213 IOH
pch_dma: fix kernel error issue
pch_dma: set the number of array correctly spi/topcliff_pch: Fix data transfer issue
USB: pch_udc: support new device ML7213 IOH
i2c-eg20t: add driver for Intel EG20T
i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH

Toshiharu Okada (7):
pch_gbe: Fix the issue which a driver locks when rx offload is set by
ethtool
pch_gbe: Fix the issue that the receiving data is not normal.
pch_gbe: Fix the MAC Address load issue.
USB device driver of Topcliff PCH
usb: pch_udc: Fixed issue which does not work with g_serial
usb: pch_udc: Fix the worning log issue at gadget driver remove
usb: pch_udc: Fixed issue which does not work with g_ether

Wolfram Sang (1):
i2c-eg20t: include slab.h for memory allocations

 drivers/char/Kconfig                  |    1 +
 drivers/dma/Kconfig                   |    9 +-
 drivers/dma/pch_dma.c                 |   54 +-
 drivers/i2c/busses/Kconfig            |   11 +
 drivers/i2c/busses/Makefile           |    1 +
 drivers/i2c/busses/i2c-eg20t.c        |  938 ++++++++++
 drivers/misc/Kconfig                  |    7 +-
 drivers/misc/pch_phub.c               |   86 +-
 drivers/net/benet/be_main.c           |    6 +-
 drivers/net/bnx2x/bnx2x_main.c        |    4 +-
 drivers/net/can/pch_can.c             | 1355 +++++++---------
 drivers/net/jme.c                     |   16 +-
 drivers/net/pch_gbe/pch_gbe.h         |    2 +-
 drivers/net/pch_gbe/pch_gbe_ethtool.c |   19 +-
 drivers/net/pch_gbe/pch_gbe_main.c    |  130 +-
 drivers/net/sc92031.c                 |    3 +-
 drivers/net/stmmac/stmmac_ethtool.c   |   12 +-
 drivers/net/stmmac/stmmac_main.c      |    5 +-
 drivers/net/vxge/vxge-ethtool.c       |    2 +-
 drivers/net/vxge/vxge-main.c          |    2 +-
 drivers/serial/Kconfig                |    1 -
 drivers/serial/Makefile               |    2 +
 drivers/spi/spi_topcliff_pch.c        |   12 +-
 drivers/tty/serial/Kconfig            |   21 +
 drivers/tty/serial/Makefile           |    6 +
 drivers/tty/serial/pch_uart.c         | 1601 ++++++++++++++++++
 drivers/usb/gadget/Kconfig            |   27 +
 drivers/usb/gadget/Makefile           |    1 +
 drivers/usb/gadget/gadget_chips.h     |    7 +
 drivers/usb/gadget/pch_udc.c          | 3002 +++++++++++++++++++++++++++++++++
 net/core/dev.c                        |    7 +-
 net/core/ethtool.c                    |    4 +-
 32 files changed, 6429 insertions(+), 925 deletions(-)
 create mode 100644 drivers/i2c/busses/i2c-eg20t.c
 create mode 100644 drivers/tty/serial/Kconfig
 create mode 100644 drivers/tty/serial/Makefile
 create mode 100644 drivers/tty/serial/pch_uart.c
 create mode 100644 drivers/usb/gadget/pch_udc.c
#1 lore raw
Quoted 4 lines · Tom Zanussi

From: Tom Zanussi <[email protected]>

This is a large patchset that reflects a lot of post-2.6.37 activity but that we need for the crownbay 2.6.37 upgrade.

The config changes all look good. I've queued them up.

Quoted 112 lines

Due to the large number, the patches themselves aren't posted here - please see the branch for those.

Please pull.

Pull URL: git://git.pokylinux.org/linux-yocto-2.6.37-contrib.git
 Branch: tzanussi/crownbay-2.6.37-machine
 Browse: http://git.pokylinux.org/cgit/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=tzanussi/crownbay-2.6.37-machine

Axel Lin (1):
 drivers/misc/pch_phub.c: add MODULE_DEVICE_TABLE

Denis Turischev (1):
 pch_uart: reference clock on CM-iTC

Jesper Juhl (1):
 serial, pch uart: Remove duplicate inclusion of linux/pci.h header

Justin P. Mattock (1):
 spi/topcliff: Typo fix threhold to threshold

Michał Mirosław (1):
 net: Fix too optimistic NETIF_F_HW_CSUM features

Rakib Mullick (1):
 drivers, pch_dma: Fix warning when CONFIG_PM=n.

Richard Röjfors (2):
 usb: pch_udc: Fix compile error, warnings and checkpatch warnings
 usb: pch_udc: Fix setup transfers with data out

Tejun Heo (1):
 pch_gbe: don't use flush_scheduled_work()

Tom Zanussi (4):
 pch_uart: move to drivers/tty/serial/
 From 5ac387d983149d4658aad17242d24eef85a43fa8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap <[email protected]> Date: Thu, 2 Dec 2010 09:19:48 -0800 Subject: [PATCH] serial: fix pch_uart kconfig & build
 commit 1c5189976ffc130416e808f41049c12615a6380c Author: Tomoya MORINAGA <[email protected]> Date: Thu Dec 16 16:13:29 2010 +0900
 From 89bf67f1f080c947c92f8773482d9e57767ca292 Mon Sep 17 00:00:00 2001 From: Eric Dumazet <[email protected]> Date: Mon, 22 Nov 2010 00:15:06 +0000 Subject: [PATCH] drivers/net: use vzalloc()

Tomoya (30):
 can: EG20T PCH: add prefix to macro
 can: EG20T PCH: use BIT(X)
 can: EG20T PCH: Separate Interface Register(IF1/IF2)
 can: EG20T PCH: Change Message Object Index
 can: EG20T PCH: Enumerate LEC macros
 can: EG20T PCH: Delete unnecessary spin_lock
 pch_can: Add flow control processing
 pch_can: Divide poll function
 pch_can: Fix endianness issue
 pch_can: Improve rx processing
 pch_can: Fix warnings
 pch_can: Rename function/macro name
 pch_can: Change functions type
 pch_can: Reduce register access
 pch_can: Change Copyright and module description
 pch_can: Replace netdev_dbg instead of dev_dbg partly
 pch_can: Fix coding rule violation
 pch_can: Delete unnecessary/redundant code
 pch_can: Fix bit timing calculation issue
 pch_can: Fix miss-setting status issue
 pch_can: Comment optimization
 pch_can: Move MSI processing to probe/remove processing
 pch_can: Fix incorrect return processing
 pch_can: Optimize "if" condition in rx/tx processing
 pch_can: Add setting TEC/REC statistics processing
 pch_can: Replace netif_rx to netif_receive_skb
 pch_can: Fix array miss-pointing issue
 pch_can: fix 800k comms issue
 pch_can: fix rmmod issue
 pch_can: fix module reload issue with MSI

Tomoya MORINAGA (20):
 pch_can: fix tseg1/tseg2 setting issue
 pch_phub: add new device ML7213
 Serial: EG20T: add PCH_UART driver
 serial: pch_uart: support new device ML7213
 pch_uart: add multi-scatter processing
 pch_uart: add spin_lock_init
 pch_uart : Reduce memcpy
 pch_uart : Use dev_xxx not pr_xxx
 pch_uart: fix uart clock setting issue
 pch_uart: fix auto flow control miss-setting issue
 pch_uart: fix exclusive access issue
 pch_uart: Fix DMA channel miss-setting issue.
 serial: pch_uart: revert Kconfig for non-DMA mode
 pch_dma: support new device ML7213 IOH
 pch_dma: fix kernel error issue
 pch_dma: set the number of array correctly spi/topcliff_pch: Fix data transfer issue
 USB: pch_udc: support new device ML7213 IOH
 i2c-eg20t: add driver for Intel EG20T
 i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH

Toshiharu Okada (7):
 pch_gbe: Fix the issue which a driver locks when rx offload is set by ethtool
 pch_gbe: Fix the issue that the receiving data is not normal.
 pch_gbe: Fix the MAC Address load issue.
 USB device driver of Topcliff PCH
 usb: pch_udc: Fixed issue which does not work with g_serial
 usb: pch_udc: Fix the worning log issue at gadget driver remove
 usb: pch_udc: Fixed issue which does not work with g_ether

Quoted 2 lines

Wolfram Sang (1):
 i2c-eg20t: include slab.h for memory allocations

upstream and all good as well. queued, a quick sanity and I'll push things out.

Cheers,

Bruce

Quoted 45 lines

 drivers/char/Kconfig                  |    1 + drivers/dma/Kconfig                   |    9 +- drivers/dma/pch_dma.c                 |   54 +- drivers/i2c/busses/Kconfig            |   11 + drivers/i2c/busses/Makefile           |    1 + drivers/i2c/busses/i2c-eg20t.c        |  938 ++++++++++ drivers/misc/Kconfig                  |    7 +- drivers/misc/pch_phub.c               |   86 +- drivers/net/benet/be_main.c           |    6 +- drivers/net/bnx2x/bnx2x_main.c        |    4 +- drivers/net/can/pch_can.c             | 1355 +++++++--------- drivers/net/jme.c                     |   16 +- drivers/net/pch_gbe/pch_gbe.h         |    2 +- drivers/net/pch_gbe/pch_gbe_ethtool.c |   19 +- drivers/net/pch_gbe/pch_gbe_main.c    |  130 +- drivers/net/sc92031.c                 |    3 +- drivers/net/stmmac/stmmac_ethtool.c   |   12 +- drivers/net/stmmac/stmmac_main.c      |    5 +- drivers/net/vxge/vxge-ethtool.c       |    2 +- drivers/net/vxge/vxge-main.c          |    2 +- drivers/serial/Kconfig                |    1 - drivers/serial/Makefile               |    2 + drivers/spi/spi_topcliff_pch.c        |   12 +- drivers/tty/serial/Kconfig            |   21 + drivers/tty/serial/Makefile           |    6 + drivers/tty/serial/pch_uart.c         | 1601 ++++++++++++++++++ drivers/usb/gadget/Kconfig            |   27 + drivers/usb/gadget/Makefile           |    1 + drivers/usb/gadget/gadget_chips.h     |    7 + drivers/usb/gadget/pch_udc.c          | 3002 +++++++++++++++++++++++++++++++++ net/core/dev.c                        |    7 +- net/core/ethtool.c                    |    4 +-

 32 files changed, 6429 insertions(+), 925 deletions(-)

 create mode 100644 drivers/i2c/busses/i2c-eg20t.c create mode 100644 drivers/tty/serial/Kconfig create mode 100644 drivers/tty/serial/Makefile create mode 100644 drivers/tty/serial/pch_uart.c create mode 100644 drivers/usb/gadget/pch_udc.c

_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky

Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"