Skip to contentSkip to conversation

How much does U-Boot Replace PMON? Anyone w/ opinions? (from embedded newbie)

U-Boot-Users Sean Parker 2 participants 2 messages Feb 8, 2008 – Feb 10, 2008

lore
Share & tools
lore
#0 lore raw

Hello -

We're using PMC's MSP8510 MIPS processor. Included in the
BSP was Linux 2.6.18 and PMON2000. We have all running, except the boot from CF. I'm a bit familiar with GRUB/LILO, and I'm looking for a direct replacement, and we thought we'd be able to use either until we saw GRUB was not ported to MIPS.

However it looks lile U-Boot accomplishes both
(PMON+GRUB-like functionality) since I see some indication U-Boot handles VFAT? (how about ATA CF?) (If U-Boot can read a VFAT CF, and load the linux image from there, then that negates the need for any subsequent boot loader like GRUB/LILO - right?)

Any recommendations out there? (such as "trash PMON and
go with U-BOOT - it does all you want" or "look here xxx to find what you want")

Any help appreciated - thanks

Sean Parker (PS please REPLY to ALL so my CC gets in
there)

God Bless

    Sean Parker 





      ____________________________________________________________________________________

Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

However it looks lile U-Boot accomplishes both
(PMON+GRUB-like functionality) since I see some indication U-Boot handles VFAT? (how about ATA CF?) (If U-Boot can

U-Boot can handle FAT/VFAT, ext2, cramfs, reiserfs, JFFS2, ...

ATA/IDE devices are supported, including CF.

Quoted 3 lines

read a VFAT CF, and load the linux image from there, then that negates the need for any subsequent boot loader like GRUB/LILO - right?)

Right. Only U-Boot is needed.

Quoted 3 lines

Any recommendations out there? (such as "trash PMON and
go with U-BOOT - it does all you want" or "look here xxx to find what you want")

You will have to port U-Boot to your hardware, but then it will match all your requirements.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"A dirty mind is a joy forever."                       - Randy Kunkee