Skip to contentSkip to conversation

3.13-rc2: locks up hard on trying to transfer a file to mmc based internal SD card slot

REGRESSION Martin Steigerwald 1 participant 1 message Nov 30, 2013

lore
Share & tools
lore
#0 lore raw

Hi!

Just does that on a ThinkPad T520 with:

merkaba:~> lspci -nn | grep MMC
0d:00.0 System peripheral [0880]: Ricoh Co Ltd PCIe SDXC/MMC Host Controller [1180:e823] (rev 08)

Mouse pointer freezes, no Ctrl-Alt-F1.

merkaba:~> fdisk -l /dev/mmcblk0

Disk /dev/mmcblk0: 31.4 GB, 31439454208 bytes
255 heads, 63 sectors/track, 3822 cylinders, total 61405184 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/mmcblk0p1 8192 61405183 30698496 c W95 FAT32 (LBA

merkaba:/sys/block/mmcblk0#2> grep . * 2>/dev/null alignment_offset:0
capability:10
dev:179:0
discard_alignment:0
ext_range:8
force_ro:0
inflight: 0 0
range:8
removable:0
ro:0
size:61405184
stat: 176 33 1672 102 0 0 0 0
0 102 102
uevent:MAJOR=179
uevent:MINOR=0
uevent:DEVNAME=mmcblk0
uevent:DEVTYPE=disk

I do not want to take the time to diagnose this further, especially as its one of those nasty "I just lock up and I don´t tell you what went wrong" kind of bugs. Thats just not a nice way to tell that there has been an error.

If there is any five or ten minute information gathering task, I am willing to provide more information, but right now there is no chance on Earth that I will be bisecting while having a long list of more interesting things to do than that.

Thus for now I just use 3.12 kernel again. Maybe I will try with some rc5 or so again.

Ciao,

Signature · 2 lines
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA  B82F 991B EAAC A599 84C7