Looking for a recommendation for the right Yocto dev board that supports MIPI CSI-2...
Hi,
I'm doing some work with MIPI cameras, and I need a development board with stable Yocto and MIPI CSI-2 support. At this point, I'm thinking i.MX, but I'm open to any suggestion.
I'm not sure what type of access I'll have to the D-PHY data streams. Do they always terminate into a GPU? However, I would like a board that gives me the most capability to control / route the data with open source drivers.
I suppose I want CSI-2 in and HDMI out.
Thank you,
Bob
Quoted 3 lines · Bob Cochran
Hi,
I'm doing some work with MIPI cameras, and I need a development board with stable Yocto and MIPI CSI-2 support. At this point, I'm thinking i.MX, but I'm open to any suggestion.
It looks like we're going to purchase an NXP MCIMX8M-EVK dev board (at least one to get started). Can someone please confirm that the imx8mqevk.conf machine file is for this board?
Is this board Yocto Project stable? I need to be able to build the master branch for this board (or should I be using next?). Any comments or feedback will be great appreciated.
Thanks
Bob
Quoted 10 lines
I'm not sure what type of access I'll have to the D-PHY data streams. Do they always terminate into a GPU? However, I would like a board that gives me the most capability to control / route the data with open source drivers.
I suppose I want CSI-2 in and HDMI out.
Thank you,
Bob
Quoted 12 lines · Bob Cochran
Quoted 5 lines · Bob Cochran
Hi,
I'm doing some work with MIPI cameras, and I need a development board
with stable Yocto and MIPI CSI-2 support. At this point, I'm
thinking i.MX, but I'm open to any suggestion.It looks like we're going to purchase an NXP MCIMX8M-EVK dev board (at
least one to get started). Can someone please confirm that the
imx8mqevk.conf machine file is for this board?
Quoted 6 lines
Is this board Yocto Project stable? I need to be able to build the master branch for this board (or should I be using next?). Any comments or feedback will be great appreciated.
seems it is in meta-freescale.
https://git.yoctoproject.org/cgit/cgit.cgi/meta-freescale/tree/conf/machine/imx8mqevk.conf?h=master
Quoted 24 lines
Thanks
Bob
Quoted 6 lines
I'm not sure what type of access I'll have to the D-PHY data streams.
Do they always terminate into a GPU? However, I would like a board
that gives me the most capability to control / route the data with open source drivers.Quoted 7 lines
I suppose I want CSI-2 in and HDMI out.
Thank you,
Bob
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto