Identifying Unused VG
Hi All,
I am new user of LVM. At home, in a desktop machine, I installed Ubuntu 20.04 LTS and while doing so I opted for LVM. This desktop computer has 2 hard disks. I want to remove 1 hard disk and use it for another computer. But I need to remove the hard disk without loss of data. The problem now is that there are two VG listed, while I think it should be only one. How to identify the unwanted VG? Maybe this is because of multiple attempts at installation. Any help on this is much appreciated.
Here are some of the output of the commands in that desktop:
root@desktop02:~# lsblk --scsi NAME HCTL TYPE VENDOR MODEL REV TRAN sda 2:0:0:0 disk ATA ST2000DM005-2CW102 0001 sata sdb 8:0:0:0 disk ATA WDC_WD20EZAZ-00GGJB0 0A80 sata root@desktop02:~# vgs VG #PV #LV #SN Attr VSize VFree vgubuntu 1 2 0 wz--n- <1.82t 0 vgubuntu 1 2 0 wz--n- <1.82t 0 root@desktop02:~# pvs PV VG Fmt Attr PSize PFree /dev/sda2 vgubuntu lvm2 a-- <1.82t 0 /dev/sdb5 vgubuntu lvm2 a-- <1.82t 0 root@desktop02:~# lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert root vgubuntu -wi-ao---- <1.82t root vgubuntu -wi------- <1.82t swap_1 vgubuntu -wi-ao---- 976.00m swap_1 vgubuntu -wi------- 976.00m root@desktop02:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT loop0 7:0 0 55M 1 loop /snap/core18/1880 loop1 7:1 0 251M 1 loop /snap/gimp/292 loop2 7:2 0 161.4M 1 loop /snap/gnome-3-28-1804/128 loop3 7:3 0 251M 1 loop /snap/gimp/297 loop4 7:4 0 162.9M 1 loop /snap/gnome-3-28-1804/145 loop5 7:5 0 55.3M 1 loop /snap/core18/1885 loop6 7:6 0 255.6M 1 loop /snap/gnome-3-34-1804/36 loop7 7:7 0 217.9M 1 loop /snap/gnome-3-34-1804/60 loop8 7:8 0 62.1M 1 loop /snap/gtk-common-themes/1506 loop9 7:9 0 138.4M 1 loop /snap/inkscape/7947 loop10 7:10 0 260.7M 1 loop /snap/kde-frameworks-5-core18/32 loop11 7:11 0 43.2M 1 loop /snap/snap-store/415 loop12 7:12 0 50.7M 1 loop /snap/snap-store/481 loop13 7:13 0 30.3M 1 loop /snap/snapd/9279 loop14 7:14 0 31M 1 loop /snap/snapd/9607 loop15 7:15 0 217.5M 1 loop /snap/supertux/229 loop16 7:16 0 290.4M 1 loop /snap/vlc/1700 sda 8:0 0 1.8T 0 disk ����sda1 8:1 0 512M 0 part ����sda2 8:2 0 1.8T 0 part sdb 8:16 0 1.8T 0 disk ����sdb1 8:17 0 512M 0 part /boot/efi ����sdb2 8:18 0 1K 0 part ����sdb5 8:21 0 1.8T 0 part ����vgubuntu-root 253:0 0 1.8T 0 lvm / ����vgubuntu-swap_1 253:1 0 976M 0 lvm [SWAP] root@desktop02:~#
Since both the VG is named as "vgubuntu", I am wondering how to identify the unused or unwanted VG. And I need to identify which hard disk (sda or sdb) I can remove. And what I need to do before unplugging it.
I would appreciate if you people can point me in the right direction. Thank you.
Rgds,
anna
Signature · 8 lines
mysql> help year data type; Name: 'YEAR DATA TYPE' Description: YEAR[(4)] A year in 4-digit format. MySQL displays YEAR values in YYYY format, but permits assignment of values to YEAR columns using either strings or numbers. Values display as 1901 to 2155, or 0000.
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Annamalai" == Annamalai Gurusami <[email protected]> writes:
Annamalai> I am new user of LVM. At home, in a desktop machine, I Annamalai> installed Ubuntu 20.04 LTS and while doing so I opted for Annamalai> LVM. This desktop computer has 2 hard disks. I want to Annamalai> remove 1 hard disk and use it for another computer. But I Annamalai> need to remove the hard disk without loss of data. The Annamalai> problem now is that there are two VG listed, while I think Annamalai> it should be only one. How to identify the unwanted VG? Annamalai> Maybe this is because of multiple attempts at installation. Annamalai> Any help on this is much appreciated.
Ugh! How did you do this? Did you clone one disk on top of another?
Can you boot off a liveCD and do the same command again please? Also
please run the 'blkid' command show that output as well. And show the output of 'cat /proc/partitions' and /proc/mdstat as well. Are you running RAID on this system? Or did you try to do that?
Annamalai> Here are some of the output of the commands in that desktop:
Looking at your 'lsblk' output, I suspect you can remove drive sda, the Seagate. So I'd probably try to shutdown cleanly, then remove that drive and boot up again.
Annamalai> root@desktop02:~# lsblk --scsi
Annamalai> NAME HCTL TYPE VENDOR MODEL REV TRAN Annamalai> sda 2:0:0:0 disk ATA ST2000DM005-2CW102 0001 sata Annamalai> sdb 8:0:0:0 disk ATA WDC_WD20EZAZ-00GGJB0 0A80 sata Annamalai> root@desktop02:~# vgs Annamalai> VG #PV #LV #SN Attr VSize VFree Annamalai> vgubuntu 1 2 0 wz--n- <1.82t 0 Annamalai> vgubuntu 1 2 0 wz--n- <1.82t 0 Annamalai> root@desktop02:~# pvs Annamalai> PV VG Fmt Attr PSize PFree Annamalai> /dev/sda2 vgubuntu lvm2 a-- <1.82t 0 Annamalai> /dev/sdb5 vgubuntu lvm2 a-- <1.82t 0 Annamalai> root@desktop02:~# lvs Annamalai> LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert Annamalai> root vgubuntu -wi-ao---- <1.82t Annamalai> root vgubuntu -wi------- <1.82t Annamalai> swap_1 vgubuntu -wi-ao---- 976.00m Annamalai> swap_1 vgubuntu -wi------- 976.00m Annamalai> root@desktop02:~# lsblk Annamalai> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT Annamalai> loop0 7:0 0 55M 1 loop /snap/core18/1880 Annamalai> loop1 7:1 0 251M 1 loop /snap/gimp/292 Annamalai> loop2 7:2 0 161.4M 1 loop /snap/gnome-3-28-1804/128 Annamalai> loop3 7:3 0 251M 1 loop /snap/gimp/297 Annamalai> loop4 7:4 0 162.9M 1 loop /snap/gnome-3-28-1804/145 Annamalai> loop5 7:5 0 55.3M 1 loop /snap/core18/1885 Annamalai> loop6 7:6 0 255.6M 1 loop /snap/gnome-3-34-1804/36 Annamalai> loop7 7:7 0 217.9M 1 loop /snap/gnome-3-34-1804/60 Annamalai> loop8 7:8 0 62.1M 1 loop /snap/gtk-common-themes/1506 Annamalai> loop9 7:9 0 138.4M 1 loop /snap/inkscape/7947 Annamalai> loop10 7:10 0 260.7M 1 loop /snap/kde-frameworks-5-core18/32 Annamalai> loop11 7:11 0 43.2M 1 loop /snap/snap-store/415 Annamalai> loop12 7:12 0 50.7M 1 loop /snap/snap-store/481 Annamalai> loop13 7:13 0 30.3M 1 loop /snap/snapd/9279 Annamalai> loop14 7:14 0 31M 1 loop /snap/snapd/9607 Annamalai> loop15 7:15 0 217.5M 1 loop /snap/supertux/229 Annamalai> loop16 7:16 0 290.4M 1 loop /snap/vlc/1700 Annamalai> sda 8:0 0 1.8T 0 disk Annamalai> ├─sda1 8:1 0 512M 0 part Annamalai> └─sda2 8:2 0 1.8T 0 part Annamalai> sdb 8:16 0 1.8T 0 disk Annamalai> ├─sdb1 8:17 0 512M 0 part /boot/efi Annamalai> ├─sdb2 8:18 0 1K 0 part Annamalai> └─sdb5 8:21 0 1.8T 0 part Annamalai> ├─vgubuntu-root 253:0 0 1.8T 0 lvm / Annamalai> └─vgubuntu-swap_1 253:1 0 976M 0 lvm [SWAP]
Annamalai> root@desktop02:~#
Annamalai> Since both the VG is named as "vgubuntu", I am wondering how to identify Annamalai> the unused or unwanted VG. And I need to identify which hard disk (sda Annamalai> or sdb) I can remove. And what I need to do before unplugging it.
Annamalai> I would appreciate if you people can point me in the right Annamalai> direction. Thank you.
Annamalai> Rgds,
Annamalai> anna
Annamalai> --
mysql> help year data type;
Annamalai> Name: 'YEAR DATA TYPE'
Annamalai> Description:
Annamalai> YEAR[(4)]
Annamalai> A year in 4-digit format. MySQL displays YEAR values in YYYY format, Annamalai> but permits assignment of values to YEAR columns using either strings Annamalai> or numbers. Values display as 1901 to 2155, or 0000.
Annamalai> _______________________________________________ Annamalai> linux-lvm mailing list
Annamalai> [email protected]
Annamalai> https://www.redhat.com/mailman/listinfo/linux-lvm
Annamalai> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 12 lines · John Stoffel
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Annamalai" == Annamalai Gurusami <[email protected]> writes:
Annamalai> I am new user of LVM. At home, in a desktop machine, I Annamalai> installed Ubuntu 20.04 LTS and while doing so I opted for Annamalai> LVM. This desktop computer has 2 hard disks. I want to Annamalai> remove 1 hard disk and use it for another computer. But I Annamalai> need to remove the hard disk without loss of data. The Annamalai> problem now is that there are two VG listed, while I think Annamalai> it should be only one. How to identify the unwanted VG? Annamalai> Maybe this is because of multiple attempts at installation. Annamalai> Any help on this is much appreciated.
Quoted 1 line
Ugh! How did you do this? Did you clone one disk on top of another?
I did installation two times. My first installation attempt failed and I repeated the process. I don't remember what exactly failed in the first attempt. In the two attempts, I guess I might have given different hard disk for the root file system. In each attempt, I told Ubuntu to use both the hard disks with LVM.
Suppose Ubuntu is installed on both the hard disks, then I should be able to boot Ubuntu from either of them. But currently I can boot from only one of them.
Quoted 4 lines
Can you boot off a liveCD and do the same command again please? Also
please run the 'blkid' command show that output as well. And show the output of 'cat/proc/partitions' and/proc/mdstatas well. Are you running RAID on this system? Or did you try to do that?
I don't have a live CD ready with me. I'll try the other simpler option (below) first and will come back to this if that didn't work.
Quoted 5 lines
Annamalai> Here are some of the output of the commands in that desktop:
Looking at your 'lsblk' output, I suspect you can remove drive sda, the Seagate. So I'd probably try to shutdown cleanly, then remove that drive and boot up again.
I'll try this first and let you know how it goes.
Thanks.
Rgds,
anna
Signature · 8 lines
mysql> help year data type; Name: 'YEAR DATA TYPE' Description: YEAR[(4)] A year in 4-digit format. MySQL displays YEAR values in YYYY format, but permits assignment of values to YEAR columns using either strings or numbers. Values display as 1901 to 2155, or 0000.
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Annamalai" == Annamalai Gurusami <[email protected]> writes:
Quoted 2 lines · Annamalai> "John Stoffel" <[email protected]> writes:
Quoted 2 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Annamalai" == Annamalai Gurusami <[email protected]> writes:
Annamalai> I am new user of LVM. At home, in a desktop machine, I Annamalai> installed Ubuntu 20.04 LTS and while doing so I opted for Annamalai> LVM. This desktop computer has 2 hard disks. I want to Annamalai> remove 1 hard disk and use it for another computer. But I Annamalai> need to remove the hard disk without loss of data. The Annamalai> problem now is that there are two VG listed, while I think Annamalai> it should be only one. How to identify the unwanted VG? Annamalai> Maybe this is because of multiple attempts at installation. Annamalai> Any help on this is much appreciated.
Quoted 2 lines
Quoted 2 lines
Ugh! How did you do this? Did you clone one disk on top of another?
Annamalai> I did installation two times. My first installation Annamalai> attempt failed and I repeated the process. I don't Annamalai> remember what exactly failed in the first attempt. In the Annamalai> two attempts, I guess I might have given different hard Annamalai> disk for the root file system. In each attempt, I told Annamalai> Ubuntu to use both the hard disks with LVM.
So once you find out which disk boots Linux ok, note down the partition layout. Then reboot with the second disk attached and make sure you do something like:
dd if=/dev/zero bs=64k count=512 /dev/sd<second disk>
which will be either sda or sdb. This 'dd' command will wipe the partition table and all the LVM data as well, so you can install windows on it.
Good luck.
Annamalai> Suppose Ubuntu is installed on both the hard disks, then I should be Annamalai> able to boot Ubuntu from either of them. But currently I can boot from Annamalai> only one of them.
Quoted 4 lines
Quoted 4 lines
Can you boot off a liveCD and do the same command again please? Also
please run the 'blkid' command show that output as well. And show the output of 'cat/proc/partitions' and/proc/mdstatas well. Are you running RAID on this system? Or did you try to do that?
Annamalai> I don't have a live CD ready with me. I'll try the other simpler option Annamalai> (below) first and will come back to this if that didn't work.
Annamalai> Here are some of the output of the commands in that desktop:
Quoted 4 lines
Quoted 4 lines
Looking at your 'lsblk' output, I suspect you can remove drive sda, the Seagate. So I'd probably try to shutdown cleanly, then remove that drive and boot up again.
Annamalai> I'll try this first and let you know how it goes.
Annamalai> Thanks.
Annamalai> Rgds,
Annamalai> anna
Annamalai> --
mysql> help year data type;
Annamalai> Name: 'YEAR DATA TYPE'
Annamalai> Description:
Annamalai> YEAR[(4)]
Annamalai> A year in 4-digit format. MySQL displays YEAR values in YYYY format, Annamalai> but permits assignment of values to YEAR columns using either strings Annamalai> or numbers. Values display as 1901 to 2155, or 0000.
Quoted 3 lines · John Stoffel
Looking at your 'lsblk' output, I suspect you can remove drive sda, the Seagate. So I'd probably try to shutdown cleanly, then remove that drive and boot up again.
Finally I was able to spend sometime doing this. And you are correct. I shutdown the computer and removed the Seagate HDD and started the computer. Everything went smooth.
Thanks for helping me.
Rgds,
anna
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Annamalai" == Annamalai Gurusami <[email protected]> writes:
Quoted 3 lines · Annamalai> "John Stoffel" <[email protected]> writes:
Quoted 3 lines
Looking at your 'lsblk' output, I suspect you can remove drive sda, the Seagate. So I'd probably try to shutdown cleanly, then remove that drive and boot up again.
Annamalai> Finally I was able to spend sometime doing this. And you are correct. Annamalai> I shutdown the computer and removed the Seagate HDD and started the Annamalai> computer. Everything went smooth.
Annamalai> Thanks for helping me.
Great! Gald to help. Now what I would do is re-install the Seagte drive, boot up and then once you've identified it properly, I would wipe the beginning of the disk with:
dd if=/dev/zero of=/dev/sd<letter> count=10000
where <letter> would *probably* be 'b' without quotes. But confirm!
Then just reboot the system and you should see only the boot disk, along with a new blank disk. Then you can do what you want with it.
John