pchdtv 3000 cx88 audio very very low level
Is this video4linux list still active? I see very little traffic on it. Is there a better place for questions about v4l drivers for the pchdtv 3000 cx88 NTSC tuner?
I have it working fine but the audio is extremely low level. Even if I boost the line-in level and the master output level to max on my sound card it's barely audible over the background static.
Is there something wrong with my card? Or with my drivers?
bash-3.1$ lsmod | grep cx
cx88_alsa 13408 0 cx8800 32268 1 compat_ioctl32 1792 1 cx8800 cx88xx 63524 2 cx88_alsa,cx8800 i2c_algo_bit 9480 1 cx88xx video_buf 21764 3 cx88_alsa,cx8800,cx88xx ir_common 9988 1 cx88xx btcx_risc 5384 3 cx88_alsa,cx8800,cx88xx v4l2_common 8064 3 cx8800,msp3400,tuner v4l1_compat 13956 2 cx8800,ivtv tveeprom 14992 2 cx88xx,ivtv videodev 10368 6 cx8800,cx88xx,ivtv snd_pcm 84484 4 cx88_alsa,snd_pcm_oss,snd_intel8x0,snd_ac97_codec i2c_core 22400 13 cx88xx,i2c_algo_bit,msp3400,saa7127,saa7115,tda9887,tuner,ivtv,tveeprom,w83627hf,eeprom,i2c_isa,i2c_i801 snd 52576 11 cx88_alsa,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
[ 5020.495242] cx2388x v4l2 driver version 0.0.5 loaded [ 5020.499005] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 22 [ 5020.499140] CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] [ 5020.499194] TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe [ 5020.676748] tuner 2-0061: chip found @ 0xc2 (cx88[0]) [ 5020.679548] tuner 2-0061: type set to 52 (Thomson DTT 7610 (ATSC/NTSC)) [ 5020.720003] tda9887 2-0043: chip found @ 0x86 (cx88[0]) [ 5020.846947] cx88[0]/0: found at 0000:02:0d.0, rev: 5, irq: 22, latency: 64, mmio: 0xf2000000 [ 5020.854107] cx88[0]/0: registered device video1 [v4l2] [ 5020.863507] cx88[0]/0: registered device vbi1 [ 5020.868332] cx88[0]/0: registered device radio1 [ 5020.873685] set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff) [ 5020.873777] set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00) [ 5020.873822] set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) [ 5020.873856] set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff) [ 5020.873891] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] [ 5020.873933] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] [ 5020.874000] set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed] [ 5046.024833] get_control id=0x980900 reg=0x310110 val=0x80 (mask 0xff) [ 5046.024860] get_control id=0x980901 reg=0x310110 val=0x3f (mask 0xff00) [ 5046.024873] get_control id=0x980902 reg=0x310114 val=0x7f (mask 0xff) [ 5046.024885] get_control id=0x980903 reg=0x310118 val=0x80 (mask 0xff) [ 5046.024897] get_control id=0x980906 reg=0x320598 val=0x00 (mask 0x7f) [shadowed] [ 5046.024911] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed] [ 5046.024920] get_control id=0x980905 reg=0x320594 val=0x1f (mask 0x3f) [shadowed] [ 5046.024929] get_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed] [ 5046.124609] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] [ 5046.124619] set_control id=0x980902 reg=0x310114 val=0x577c (mask 0xffff) [ 5046.124638] set_control id=0x980900 reg=0x310110 val=0xff (mask 0xff) [ 5046.124652] set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) [ 5046.124665] set_control id=0x980901 reg=0x310110 val=0x3800 (mask 0xff00) [ 5046.166913] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed] [ 5200.569119] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] [ 5200.569129] set_control id=0x980902 reg=0x310114 val=0x577c (mask 0xffff) [ 5200.569147] set_control id=0x980900 reg=0x310110 val=0xff (mask 0xff) [ 5200.569161] set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff) [ 5200.569174] set_control id=0x980901 reg=0x310110 val=0x3800 (mask 0xff00) [ 5200.613786] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed] [ 5389.899723] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] [ 5389.899733] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] [ 5390.931524] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] [ 5390.931534] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed] [ 6560.963631] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] [ 6560.963641] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] [ 6563.560136] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] [ 6563.560147] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed] [ 6564.125801] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] [ 6564.125811] set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed] [ 6750.293689] set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed] [ 6750.293699] set_control id=0x980909 reg=0x320594 val=0x00 (mask 0x40) [shadowed] [ 6824.893884] cx2388x alsa driver version 0.0.5 loaded
Signature · 1 line
greg
Hi,
Quoted 10 lines · Greg Stark
Is this video4linux list still active? I see very little traffic on it. Is there a better place for questions about v4l drivers for the pchdtv 3000 cx88 NTSC tuner?
I have it working fine but the audio is extremely low level. Even if I boost the line-in level and the master output level to max on my sound card it's barely audible over the background static.
Is there something wrong with my card? Or with my drivers?
Since I once tweaked bttv for my card, I'm almost damn sure that this must be an audio multiplexer (mux) issue. Many TV/tuner cards route their audio output through incredibly many different types of multiplexer ICs, each of which requires their own switch mask.
If the mux isn't configured properly, then audio will be switched off completely except for possibly some very, very silent cross-channel speak.
IOW, you need to examine the driver sources of cx88xx, cx8800, cx88_alsa, btcx_risc, tveeprom (?) for some multiplexer bit mask and tweak/twiddle that for your tuner until you manage to hear something properly.
Oh, and:
Quoted 1 line
[ 5020.679548] tuner 2-0061: type set to 52 (Thomson DTT 7610 (ATSC/NTSC))
That module probably has a type= parameter. Experiment with that one until you possibly even hear something properly, then try to fix type autodetection for your card.
Andreas Mohr
Signature · 4 lines
No programming skills!? Why not help translate many Linux applications! https://launchpad.ubuntu.com/rosetta (or alternatively buy nicely packaged Linux distros/OSS software to help support Linux developers creating shiny new things for you?)
Quoted 3 lines · Andreas Mohr
IOW, you need to examine the driver sources of cx88xx, cx8800,
cx88_alsa,btcx_risc, tveeprom (?) for some multiplexer bit mask and tweak/twiddle that for your tuner until you manage to hear something properly.
Hm. Except nobody else seems to have this problem with the pchdtv 3000 card. And there are plenty of HOWTOs and FAQs online for it. Perhaps nobody else is trying to use the NTSC tuner on it though.
I'm assuming that if cx88_alsa found any audio devices on the card then it would create a card1 listed in /proc/asound/cards ? It isn't doing that currently. Apparently not all cx88 cards provide a mixer interface.
Signature · 1 line
greg
Hi,
Quoted 9 lines · Greg Stark
Quoted 3 lines · Andreas Mohr
IOW, you need to examine the driver sources of cx88xx, cx8800,
cx88_alsa,btcx_risc, tveeprom (?) for some multiplexer bit mask and tweak/twiddle that for your tuner until you manage to hear something properly.Hm. Except nobody else seems to have this problem with the pchdtv 3000 card. And there are plenty of HOWTOs and FAQs online for it. Perhaps nobody else is trying to use the NTSC tuner on it though.
A distant possibility might be that your card is a very specific rare revision of that thing and thus doesn't have a proper card type entry for it due to almost nobody else having that card.
In the TV card area (just as in the WLAN card area) there are quite some cards sold under the *very same* name but wildly (or not so wildly but sufficiently) differing hardware (those manufacturer b****rds burn in hell please, thanks).
Quoted 3 lines
I'm assuming that if
cx88_alsafound any audio devices on the card then it would create a card1 listed in/proc/asound/cards? It isn't doing that currently. Apparently not all cx88 cards provide a mixer interface.
I'm not that familiar with ALSA user-space interface specifics (rather than kernel-level), sorry.
Andreas Mohr
Quoted 29 lines · Andreas Mohr
Hi,
Quoted 4 lines · Greg Stark
Andreas Mohr <[email protected]> writes:
Quoted 10 lines
Quoted 5 lines
IOW, you need to examine the driver sources of cx88xx, cx8800,
cx88_alsa,btcx_risc, tveeprom (?) for some multiplexer bit mask and tweak/twiddle that for your tuner until you manage to hear something properly.Hm. Except nobody else seems to have this problem with the pchdtv 3000 card. And there are plenty of HOWTOs and FAQs online for it. Perhaps nobody else is trying to use the NTSC tuner on it though.
A distant possibility might be that your card is a very specific rare revision of that thing and thus doesn't have a proper card type entry for it due to almost nobody else having that card.
In the TV card area (just as in the WLAN card area) there are quite some cards sold under the *very same* name but wildly (or not so wildly but sufficiently) differing hardware (those manufacturer b****rds burn in hell please, thanks).
Quoted 9 lines
Quoted 5 lines
I'm assuming that if
cx88_alsafound any audio devices on the card then it would create a card1 listed in/proc/asound/cards? It isn't doing that currently. Apparently not all cx88 cards provide a mixer interface.I'm not that familiar with ALSA user-space interface specifics (rather than kernel-level), sorry.
We have recently discovered that the programming for the pcHDTV3000 card was based on a prototype that used the Thomson DTT7610 tuner, and that this particular version of the card has never gone into production.
The actual version of the card in circulation uses the Thomson DTT7612 ... You do not need a patch to correct this on your machine, at least not for analog NTSC mode. Just load your driver as follows:
modprobe cx88xx tuner=60 (it will use tuner 52 by default)
modprobe cx8800
Tuner #52 is the previous tuner defined for this card, DTT7610, and tuner #60 is configured for Thomson DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A
The configuration for this card has been fixed in the v4l-dvb mercurial tree as of this morning. To update your v4l/dvb modules (so long as you are running kernel 2.6.12 or later) follow the directions here:
I hope this helps,
Michael Krufky
Hi,
Quoted 12 lines · Michael Krufky
Quoted 10 lines · Andreas Mohr
A distant possibility might be that your card is a very specific rare revision
of that thing and thus doesn't have a proper card type entry for it due to almost nobody else having that card.
In the TV card area (just as in the WLAN card area) there are quite some cards
sold under the *very same* name but wildly (or not so wildly but sufficiently)
differing hardware (those manufacturer b****rds burn in hell please, thanks).
Quoted 3 lines
We have recently discovered that the programming for the pcHDTV3000 card was based on a prototype that used the Thomson DTT7610 tuner, and that this particular version of the card has never gone into production.
BINGO!
Do I get to keep the $100000 prize now? :-P
One day you wake up and think by yourself "surely hardware manufacturers have screwed us enough by now, it cannot happen again" - only for it to *do* happen again some moments later only...
Quoted 7 lines
The actual version of the card in circulation uses the Thomson DTT7612 ... You do not need a patch to correct this on your machine, at least not for analog NTSC mode. Just load your driver as follows:
modprobe cx88xx tuner=60 (it will use tuner 52 by default)
modprobe cx8800
Quoted 7 lines
Tuner #52 is the previous tuner defined for this card, DTT7610, and tuner #60 is configured for Thomson DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A
The configuration for this card has been fixed in the v4l-dvb mercurial tree as of this morning. To update your v4l/dvb modules (so long as you are running kernel 2.6.12 or later) follow the directions here:
Does that mean that detection for this card is now fully automatic and correct? I'm asking since this is what we should really try to achieve:
99% of people are John Does, and 97% of those would assume Linux support for this card to be "nonexistent"/"broken" ("thiz Leenux SUCKERZ!"), and a measly remaining 3% would know how to configure this stuff manually properly.
Andreas Mohr
(that's the guy that has yet another mis-detected "close but entirely different" TV card sitting and waiting for its bttv fix soon)