Skip to contentSkip to conversation

aoe: add documentation for udev users

PATCH Applied Ed L Cashin 2 participants 2 messages Jan 19, 2005 – Feb 1, 2005 Documentation

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 aoe: add documentation for udev users

Hi. This patch was generated against block-2.6 but should apply easily in other trees, since it touches only documentation.

add documentation for udev users

Documentation/aoe/aoe.txt +10 -3
@@ -6,9 +6,16 @@ The EtherDrive (R) HOWTO for users of 2.
 
 CREATING DEVICE NODES
 
-  Users of udev should find device nodes created automatically.  Two
-  scripts are provided in Documentation/aoe as examples of static
-  device node creation for using the aoe driver.
+  Users of udev should find the block device nodes created
+  automatically, but to create all the necessary device nodes, use the
+  udev configuration rules provided in udev.txt (in this directory).
+
+  There is a udev-install.sh script that shows how to install these
+  rules on your system.
+
+  If you are not using udev, two scripts are provided in
+  Documentation/aoe as examples of static device node creation for
+  using the aoe driver.
 
     rm -rf /dev/etherd
     sh Documentation/aoe/mkdevs.sh /dev/etherd
Documentation/aoe/udev-install.sh +22 -0
@@ -0,0 +1,22 @@
+# install the aoe-specific udev rules from udev.txt into 
+# the system's udev configuration
+# 
+
+me="`basename $0`"
+
+# find udev.conf, often /etc/udev/udev.conf
+# (or environment can specify where to find udev.conf)
+#
+if test -z "$conf"; then
+	conf="`find /etc -type f -name udev.conf 2> /dev/null`"
+fi
+if test -z "$conf" || test ! -r $conf; then
+	echo "$me Error: could not find readable udev.conf in /etc" 1>&2
+	exit 1
+fi
+
+# find the directory where udev rules are stored, often
+# /etc/udev/rules.d
+#
+rules_d="`sed -n '/^udev_rules=/{ s!udev_rules=!!; s!\"!!g; p; }' $conf`"
+test "$rules_d" && sh -xc "cp `dirname $0`/udev.txt $rules_d/60-aoe.rules"
Documentation/aoe/udev.txt +23 -0
@@ -0,0 +1,23 @@
+# These rules tell udev what device nodes to create for aoe support.
+# They may be installed along the following lines (adjusted to what
+# you see on your system).
+# 
+#   ecashin@makki ~$ su
+#   Password:
+#   bash# find /etc -type f -name udev.conf
+#   /etc/udev/udev.conf
+#   bash# grep udev_rules= /etc/udev/udev.conf
+#   udev_rules="/etc/udev/rules.d/"
+#   bash# ls /etc/udev/rules.d/
+#   10-wacom.rules  50-udev.rules
+#   bash# cp /path/to/linux-2.6.xx/Documentation/aoe/udev.txt \
+#           /etc/udev/rules.d/60-aoe.rules
+#  
+
+# aoe char devices
+SUBSYSTEM="aoe", KERNEL="discover",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM="aoe", KERNEL="err",		NAME="etherd/%k", GROUP="disk", MODE="0440"
+SUBSYSTEM="aoe", KERNEL="interfaces",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+
+# aoe block devices     
+KERNEL="etherd*",       NAME="%k", GROUP="disk"
Signature · 2 lines
-- 
  Ed L Cashin <[email protected]>
Applied
#1 lore raw
Quoted 7 lines · Ed L Cashin

Hi. This patch was generated against block-2.6 but should apply easily in other trees, since it touches only documentation.

add documentation for udev users

Applied, thanks.

greg k-h