boot hang using OMAP for-next + Russell's for-linus
FYI... I just found this, but won't be able to look into it until next week, so if anyone needs a weekend debug project...
Using Tony's for-next branch, I'm able to boot an omap2plus_defconfig (+
busybox initramfs) kernel on my 3430/n900 just fine. I then tried to
merge in Russell's for-linus branch and it hangs during boot.
It appears to hang in the init/registration of i2c busses. Commenting out the i2c bus registration from board-rx51-peripherals and disabling a few of the users of i2c, I was able to boot.
Kevin
Quoted 10 lines · Kevin Hilman
FYI... I just found this, but won't be able to look into it until next week, so if anyone needs a weekend debug project...
Using Tony's for-next branch, I'm able to boot an
omap2plus_defconfig(+
busybox initramfs) kernel on my 3430/n900 just fine. I then tried to
merge in Russell's for-linus branch and it hangs during boot.It appears to hang in the init/registration of i2c busses. Commenting out the i2c bus registration from board-rx51-peripherals and disabling a few of the users of i2c, I was able to boot.
Looks like at least v3.0-rc1 boots just fine, so whatever that was has been already fixed.
Regards,
Tony
Tony,
Quoted 8 lines · Tony Lindgren
Quoted 7 lines · Kevin Hilman
FYI... I just found this, but won't be able to look into it until next week, so if anyone needs a weekend debug project...
Using Tony's for-next branch, I'm able to boot an
omap2plus_defconfig(+
busybox initramfs) kernel on my 3430/n900 just fine. I then tried to
merge in Russell's for-linus branch and it hangs during boot.
Quoted 7 lines
Quoted 3 lines
It appears to hang in the init/registration of i2c busses. Commenting out the i2c bus registration from board-rx51-peripherals and disabling a few of the users of i2c, I was able to boot.
Looks like at least v3.0-rc1 boots just fine, so whatever that was has been already fixed.
I noticed couple of issues with v3.0-rc1 as reported [1] on OMAP4430 SDP. Am I missing any trick for the console issue.
Regards
Santosh
[1] http://www.mail-archive.com/[email protected]/msg50126.html
Quoted 8 lines · Tony Lindgren
Quoted 7 lines · Kevin Hilman
FYI... I just found this, but won't be able to look into it until next week, so if anyone needs a weekend debug project...
Using Tony's for-next branch, I'm able to boot an
omap2plus_defconfig(+
busybox initramfs) kernel on my 3430/n900 just fine. I then tried to
merge in Russell's for-linus branch and it hangs during boot.
Quoted 6 lines
Quoted 3 lines
It appears to hang in the init/registration of i2c busses. Commenting out the i2c bus registration from board-rx51-peripherals and disabling a few of the users of i2c, I was able to boot.
Looks like at least v3.0-rc1 boots just fine, so whatever that was has been already fixed.
Indeed, rc1 is booting fine for me now.
Kevin