Skip to contentSkip to conversation

h8300 update timer handler - misc update

PATCH In review Yoshinori Sato 1 participant 1 message Aug 3, 2008

lore
Share & tools
lore

Yoshinori Sato

author
#0 lore raw

PATCH 3/3 h8300 update timer handler - misc update

- Update selection
- Update common timer handler
- Add support functions

Signed-off-by Yoshinori Sato <[email protected]>
arch/h8300/Kconfig.cpu +50 -65
index 582797d..b65dcfe 100644
@@ -1,5 +1,7 @@
 menu "Processor type and features"
 
+source "kernel/time/Kconfig"
+
 choice
 	prompt "H8/300 platform"
 	default H8300H_GENERIC

@@ -11,6 +13,7 @@ config H8300H_GENERIC
 
 config H8300H_AKI3068NET
 	bool "AE-3068/69"
+	select CONFIG_H83068
 	help
 	  AKI-H8/3068F / AKI-H8/3069F Flashmicom LAN Board Support
 	  More Information. (Japanese Only)

@@ -21,6 +24,7 @@ config H8300H_AKI3068NET
 
 config H8300H_H8MAX
 	bool "H8MAX"
+	select CONFIG_H83068
 	help
 	  H8MAX Evaluation Board Support
 	  More Information. (Japanese Only)

@@ -28,6 +32,7 @@ config H8300H_H8MAX
 
 config H8300H_SIM
 	bool "H8/300H Simulator"
+	select CONFIG_H83007
 	help
 	  GDB Simulator Support
 	  More Information.

@@ -40,6 +45,7 @@ config H8S_GENERIC
 
 config H8S_EDOSK2674
 	bool "EDOSK-2674"
+	select CONFIG_H8S2768
 	help
 	  Renesas EDOSK-2674 Evaluation Board Support
 	  More Information.

@@ -55,44 +61,37 @@ config H8S_SIM
 
 endchoice
 
-if (H8300H_GENERIC || H8S_GENERIC)
-menu "Detail Selection"
-if (H8300H_GENERIC)
 choice
 	prompt "CPU Selection"
 
 config H83002
 	bool "H8/3001,3002,3003"
+	select CPU_H8300H
 
 config H83007
 	bool "H8/3006,3007"
+	select CPU_H8300H
 
 config H83048
 	bool "H8/3044,3045,3046,3047,3048,3052"
+	select CPU_H8300H
 
 config H83068
 	bool "H8/3065,3066,3067,3068,3069"
-endchoice
-endif
-
-if (H8S_GENERIC)
-choice
-	prompt "CPU Selection"
+	select CPU_H8300H
 
 config H8S2678
 	bool "H8S/2670,2673,2674R,2675,2676"
+	select CPU_H8S
+
 endchoice
-endif
 
 config CPU_CLOCK
 	int "CPU Clock Frequency (/1KHz)"
 	default "20000"
 	help
 	  CPU Clock Frequency divide to 1000
-endmenu
-endif
 
-if (H8300H_GENERIC || H8S_GENERIC || H8300H_SIM || H8S_SIM || H8S_EDOSK2674)
 choice
 	prompt "Kernel executes from"
 	---help---

@@ -107,75 +106,61 @@ config ROMKERNEL
 	bool "ROM"
 	help
 	  The kernel will be resident in FLASH/ROM when running.
-
 endchoice
-endif
 
-if (H8300H_AKI3068NET)
-config H83068
-	bool
-	default y
 
-config CPU_CLOCK
-	int
-	default "20000"
-
-config RAMKERNEL
+config CPU_H8300H
 	bool
+	depends on (H83002 || H83007 || H83048 || H83068)
 	default y
-endif
 
-if (H8300H_H8MAX)
-config H83068
+config CPU_H8S
 	bool
+	depends on H8S2678
 	default y
 
-config CPU_CLOCK
-	int
-	default 25000
+choice
+	prompt "Timer"
+config H8300_TIMER8
+	bool "8bit timer (2ch cascade)"
+	depends on (H83007 || H83068 || H8S2678)
 
-config RAMKERNEL
-	bool
-	default y
-endif
+config H8300_TIMER16
+	bool "16bit timer"
+	depends on (H83007 || H83068)
 
-if (H8300H_SIM)
-config H83007
-	bool
-	default y
+config H8300_ITU
+	bool "ITU"
+	depends on (H83002 || H83048)
 
-config CPU_CLOCK
-	int
-	default "16000"
-endif
+config H8300_TPU
+	bool "TPU"
+	depends on H8S2678
+endchoice
 
-if (H8S_EDOSK2674)
-config H8S2678
-	bool
-	default y
-config CPU_CLOCK
-	int
-	default 33000
+if H8300_TIMER8
+choice
+	prompt "Timer Channel"
+config H8300_TIMER8_CH0
+	bool "Channel 0"
+config H8300_TIMER8_CH2
+	bool "Channel 2"
+	depends on CPU_H8300H
+endchoice
 endif
 
-if (H8S_SIM)
-config H8S2678
-	bool
-	default y
-config CPU_CLOCK
-	int
-	default 33000
-endif
+config H8300_TIMER16_CH
+	int "16bit timer channel (0 - 2)"
+	depends on H8300_TIMER16
+	range 0 2
 
-config CPU_H8300H
-	bool
-	depends on (H83002 || H83007 || H83048 || H83068)
-	default y
+config H8300_ITU_CH
+	int "ITU channel"
+	depends on H8300_ITU
 
-config CPU_H8S
-	bool
-	depends on H8S2678
-	default y
+config H8300_TPU_CH
+	int "TPU channel"
+	depends on H8300_TPU
 
 config PREEMPT
 	bool "Preemptible Kernel"
arch/h8300/kernel/Makefile +1 -1
index 6c248c3..8d4d2a5 100644
@@ -7,6 +7,6 @@ extra-y := vmlinux.lds
 obj-y := process.o traps.o ptrace.o irq.o \
 	 sys_h8300.o time.o signal.o \
          setup.o gpio.o init_task.o syscalls.o \
-	 entry.o
+	 entry.o timer/
 
 obj-$(CONFIG_MODULES) += module.o h8300_ksyms.o
arch/h8300/kernel/time.c +12 -17
index d0d2f26..14e06f9 100644
@@ -27,27 +27,21 @@
 #include <linux/profile.h>
 
 #include <asm/io.h>
-#include <asm/target_time.h>
+#include <asm/timer.h>
 
 #define	TICK_SIZE (tick_nsec / 1000)
 
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static void timer_interrupt(int irq, void *dummy, struct pt_regs * regs)
+void h8300_timer_tick(void)
 {
-	/* may need to kick the hardware timer */
-	platform_timer_eoi();
-
+	if (current->pid)
+		profile_tick(CPU_PROFILING);
+	write_seqlock(&xtime_lock);
 	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	profile_tick(CPU_PROFILING);
+	write_sequnlock(&xtime_lock);
+	update_process_times(user_mode(get_irq_regs()));
 }
 
-void time_init(void)
+void __init time_init(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 

@@ -57,12 +51,13 @@
 	year = 1980;
 	mon = day = 1;
 	hour = min = sec = 0;
-	platform_gettod (&year, &mon, &day, &hour, &min, &sec);
-
+#ifdef CONFIG_H8300_GETTOD 
+	h8300_gettod (&year, &mon, &day, &hour, &min, &sec);
+#endif
 	if ((year += 1900) < 1970)
 		year += 100;
 	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
 	xtime.tv_nsec = 0;
 
-	platform_timer_setup(timer_interrupt);
+	h8300_timer_setup();
 }
include/asm-h8300/io.h +34 -0
index 26dc6cc..34d1d3b 100644
@@ -295,6 +295,40 @@ static __inline__ void ctrl_outl(unsigned long b, unsigned long addr)
         *(volatile unsigned long*)addr = b;
 }
 
+static __inline__ void ctrl_bclr(int b, unsigned long addr)
+{
+	if (__builtin_constant_p(b))
+		switch (b) {
+		case 0: __asm__("bclr #0,@%0"::"r"(addr)); break;
+		case 1: __asm__("bclr #1,@%0"::"r"(addr)); break;
+		case 2: __asm__("bclr #2,@%0"::"r"(addr)); break;
+		case 3: __asm__("bclr #3,@%0"::"r"(addr)); break;
+		case 4: __asm__("bclr #4,@%0"::"r"(addr)); break;
+		case 5: __asm__("bclr #5,@%0"::"r"(addr)); break;
+		case 6: __asm__("bclr #6,@%0"::"r"(addr)); break;
+		case 7: __asm__("bclr #7,@%0"::"r"(addr)); break;
+		}
+	else
+		__asm__("bclr %w0,@%1"::"r"(b), "r"(addr));
+}
+
+static __inline__ void ctrl_bset(int b, unsigned long addr)
+{
+	if (__builtin_constant_p(b))
+		switch (b) {
+		case 0: __asm__("bset #0,@%0"::"r"(addr)); break;
+		case 1: __asm__("bset #1,@%0"::"r"(addr)); break;
+		case 2: __asm__("bset #2,@%0"::"r"(addr)); break;
+		case 3: __asm__("bset #3,@%0"::"r"(addr)); break;
+		case 4: __asm__("bset #4,@%0"::"r"(addr)); break;
+		case 5: __asm__("bset #5,@%0"::"r"(addr)); break;
+		case 6: __asm__("bset #6,@%0"::"r"(addr)); break;
+		case 7: __asm__("bset #7,@%0"::"r"(addr)); break;
+		}
+	else
+		__asm__("bset %w0,@%1"::"r"(b), "r"(addr));
+}
+
 /* Pages to physical address... */
 #define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
 #define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
Signature · 2 lines
Yoshinori Sato
<[email protected]>