watchdog/perf: Properly initialize the turbo mode timestamp and rearm counter

For systems on which the performance counter can expire early due to turbo modes it the watchdog handler has a safety net in place which validates that since the last watchdog event there has at least 4/5th of the watchdog period elapsed.

This works only reliably after the first watchdog event because the per CPU variable which holds the timestamp of the last event is never initialized.

So a first spurious event will validate against a timestamp of 0 which results in a delta which is likely to be way over the 4/5 threshold of the period. As this might happen before the first watchdog hrtimer event increments the watchdog counter, this can lead to false positives.

Fix this by initializing the timestamp before enabling the hardware event. Reset the rearm counter as well, as that might be non zero after the watchdog was disabled and reenabled.

---
Resend because I screwed up the subject header. Sorry for the noise

---
 kernel/watchdog_perf.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

@@ -75,11 +75,15 @@ static bool watchdog_check_timestamp(voi
 	__this_cpu_write(last_timestamp, now);
 	return true;
 }
-#else
-static inline bool watchdog_check_timestamp(void)
+
+static void watchdog_init_timestamp(void)
 {
-	return true;
+	__this_cpu_write(nmi_rearmed, 0);
+	__this_cpu_write(last_timestamp, ktime_get_mono_fast_ns());
 }
+#else
+static inline bool watchdog_check_timestamp(void) { return true; }
+static inline void watchdog_init_timestamp(void) { }
 #endif
 
 static struct perf_event_attr wd_hw_attr = {

@@ -161,6 +165,7 @@ void watchdog_hardlockup_enable(unsigned
 	if (!atomic_fetch_inc(&watchdog_cpus))
 		pr_info("Enabled. Permanently consumes one hw-PMU counter.\n");
 
+	watchdog_init_timestamp();
 	perf_event_enable(this_cpu_read(watchdog_ev));
 }