ASoC: rsnd: care detail of SRC_BSDSR
Subsystems (3)
PATCH 1/1 ASoC: rsnd: care detail of SRC_BSDSR
From: Kuninori Morimoto <[email protected]>
Driver should care more detail of SRC_BSDSR settings. The sound includes noise without this patch if it used SRC.
Signed-off-by Kuninori Morimoto <[email protected]>
--- sound/soc/sh/rcar/src.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-)
sound/soc/sh/rcar/src.c +31 -1
@@ -483,15 +483,45 @@ static struct rsnd_mod_ops rsnd_src_gen1_ops = {static int rsnd_src_set_convert_rate_gen2 (struct rsnd_mod *mod,struct rsnd_dai *rdai) { +struct rsnd_priv *priv =rsnd_mod_to_priv (mod); +struct device *dev =rsnd_priv_to_dev (priv); +struct rsnd_dai_stream *io =rsnd_mod_to_io (mod); +struct snd_pcm_runtime *runtime =rsnd_io_to_runtime (io); +struct rsnd_src *src =rsnd_mod_to_src (mod); +uint ratio;int ret; +/* 6 - 1/6 are very enough ratio for SRC_BSDSR */ +if (!rsnd_src_convert_rate (src)) + ratio =0 ; +else if (rsnd_src_convert_rate (src) > runtime->rate) + ratio =100 *rsnd_src_convert_rate (src) / runtime->rate; +else + ratio =100 * runtime->rate /rsnd_src_convert_rate (src); + +if (ratio >600 ) { +dev_err (dev,"FSO/FSI ratio error\n" ); +return -EINVAL ; + } + ret =rsnd_src_set_convert_rate (mod, rdai);if (ret <0 )return ret;rsnd_mod_write (mod,SRC_SRCCR ,0x00011110 ); -rsnd_mod_write (mod,SRC_BSDSR ,0x01800000 ); +switch (rsnd_mod_id (mod)) { +case 5 : +case 6 : +case 7 : +case 8 : +rsnd_mod_write (mod,SRC_BSDSR ,0x02400000 ); +break ; +default : +rsnd_mod_write (mod,SRC_BSDSR ,0x01800000 ); +break ; + } +rsnd_mod_write (mod,SRC_BSISR ,0x00100060 );return 0 ;
Signature · 1 line
1.7.9.5
Quoted 5 lines · Kuninori Morimoto
From: Kuninori Morimoto <[email protected]>
Driver should care more detail of
SRC_BSDSRsettings. The sound includes noise without this patch if it used SRC.
Applied, thanks.