What is the status of the driver TT CT-3650
Hi
I have recently bought such a card and tried to get it working. Does anyone know if it is possible. I have compiled the dvb drivers from s2-liplianin
And tried to use the scan program from the dvb-apps mercurial tarball. I also compile scan-s2 and tried that, but I always get "tuning failed"
Anyone know how to get this working or this card is in a working state under linux. Because if it not working yet I will stop wasting my time :-)
Regards
Hasse H. Johansen
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I have tried the TT Ct2650 C/T CI as a DVB-T tuner with the same negative result. I have heard that there is some work going on but haven't hear of any definitive positive results yet.
As i am no programmer but fairly well in using linux i cam contribute on testing and documenting if there is some positive results.
Still hoping...
Citat af Hasse Hagen Johansen <[email protected]>:
Quoted 22 lines
Hi
I have recently bought such a card and tried to get it working. Does anyone know if it is possible. I have compiled the dvb drivers from s2-liplianin
And tried to use the scan program from the dvb-apps mercurial tarball. I also compile scan-s2 and tried that, but I always get "tuning failed"
Anyone know how to get this working or this card is in a working state under linux. Because if it not working yet I will stop wasting my time :-)
Regards
Hasse H. Johansen_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi,
Quoted 2 lines
Anyone know how to get this working or this card is in a working state under linux. Because if it not working yet I will stop wasting my time
Second that request. Is anybody working on a driver for this device? Is it worth waiting?
Technotrend DVB products have been good for me in the past and this combination of DVB-C with CI is something well suited for my next vdr hardware setup.
Thanks,
Hanno
Hanno,
I've been working on having the CT-3650 supported however I didn't go very farther than having the dvb-c frontend to work. Nothing else works : no CI, no DVB-T, no IR.
I've attached a patch which is working for me. Again, only the dvb-c interface works. Also this patch should definitely not go upstream. The cold firmware should not be used but it's there because I erased the eeprom of my card by mistake.
I'm still planning to have a better support for this card but I unfortunately have other things to work on before.
HTH,
Guy
Quoted 9 lines · On Mon, 09 Nov 2009 11:55:23 +0100 Hanno Zulla <[email protected]> wrote:
Hi,
Quoted 3 lines
Anyone know how to get this working or this card is in a working state under linux. Because if it not working yet I will stop wasting my time
Second that request. Is anybody working on a driver for this device? Is it worth waiting?
Quoted 8 lines
Technotrend DVB products have been good for me in the past and this combination of DVB-C with CI is something well suited for my next vdr hardware setup.
Thanks,
Hanno
linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +2 -1
@@ -61,7 +61,7 @@#define USB_VID_HUMAX_COEX 0x10b9/* Product IDs */ -#define USB_PID_ADSTECH_USB2_COLD 0xa333 +//#define USB_PID_ADSTECH_USB2_COLD 0xa333 #define USB_PID_ADSTECH_USB2_WARM 0xa334#define USB_PID_AFATECH_AF9005 0x9020#define USB_PID_AFATECH_AF9015_9015 0x9015
@@ -178,6 +178,7 @@#define USB_PID_AVERMEDIA_A850 0x850a#define USB_PID_AVERMEDIA_A805 0xa805#define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 +#define USB_PID_TECHNOTREND_CONNECT_CT3650 0x300d#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081#define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058
linux/drivers/media/dvb/dvb-usb/ttusb2.c +141 -6
201 lines not on this page · raw message
I have an CT-3650 CI that I would like to use on my mythtv because i thibk it is a smart combination of funktionlity. The thing i am interrested is the dvb-t and the Ci part.
Unfortunately this is the parts that is not working under linux :-(
I am still hoping that somebody would find a way to get it working. I am not a programmer/developer but i could contribute by testing and documentation.
/jensk
Citat af Hanno Zulla <[email protected]>:
Quoted 14 lines
Hi,
Quoted 2 lines
Anyone know how to get this working or this card is in a working state under linux. Because if it not working yet I will stop wasting my time
Second that request. Is anybody working on a driver for this device? Is it worth waiting?
Technotrend DVB products have been good for me in the past and this combination of DVB-C with CI is something well suited for my next vdr hardware setup.
Thanks,
Quoted 8 lines
Hanno
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb