Skip to contentSkip to conversation

mencoder fails with Linux kernel from linus's git tree (2 Nov 2005)

DISCUSSION Junichi Uekawa 8 participants 24 messages Nov 3, 2005 – Feb 2, 2006 1 message not in the archive

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

Hi,

I've noticed that mencoder no longer works with bttv capture on my system; with today's git tree (ec1890c5df451799dec969a3581ff72e1934b5ee), while it used to work on 2.6.14-rc5.
xawtv functions.
I'm looking for people who experienced the same problem, or possibly for a fix.

The devices are:
0000:03:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:03:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 0000:03:0b.0 0400: 109e:036e (rev 11)
0000:03:0b.1 0480: 109e:0878 (rev 11)

I'm using mencoder Debian package '1:1.0-pre7cvs20051102-0.0' from marillat's for x86_64 architecture.

$ mencoder --version
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

--version is not an MEncoder option

Exiting... (error parsing cmdline)

Linux dancer64 2.6.14-rc5dancer-gb563c9b1 #1 Thu Oct 27 12:55:05 JST 2005 x86_64 GNU/Linux mencoder output on 2.6.14 (today's git)

channel: 12
minutes: 30
output filename: /home/dancer/XXX/XXX/
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices (Family: 8, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: Type: 8 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

File not found: 'frameno.avi'
Failed to open frameno.avi
success: format: 9 data: 0x0 - 0x0
TV detected! ;-)
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
Selected channel: 12 (freq: 217.250)
v4l2: ioctl queue buffer failed: Bad address

Linux dancer64 2.6.14-rc5dancer-gb563c9b1 #1 Thu Oct 27 12:55:05 JST 2005 x86_64 GNU/Linux

mencoder output on 2.6.14-rc5:
channel: 12
minutes: 1
output filename: /tmp/aaaa.avi
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

success: format: 9 data: 0x0 - 0x0
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
Selected channel: 12 (freq: 217.250)
[V] filefmt:9 fourcc:0x30323449 size:320x240 fps:29.97 ftime:=0.0334
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 320 x 240 (preferred colorspace: Planar I420)
VDec: using Planar I420 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (320x240 fourcc=34504d46 [FMP4])
High quality encoding selected (non real time)!
Selected video codec: [rawi420] vfm: raw (RAW I420)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
MP3 audio selected
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
Writing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Forcing audio preload to 0, max pts correction to 0
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
Pos: 4.1s 124f ( 0%) 26fps Trem: 0min 0mb A-V:0.000 [1082:128]
Flushing video frames

CBR audio: 16000 bytes/sec, 384 bytes/block

Writing AVI index...
Fixing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.

Video stream: 1082.222 kbit/s (135277 B/s) size: 559707 bytes 4.137 secs 124 frames

Audio stream: 128.000 kbit/s (16000 B/s) size: 66048 bytes 4.128 secs
v4l2: 139 frames successfully processed, 0 frames dropped.

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#1 lore raw

[x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Hi,

I've tried running mplayer v4l2 input on a bt878 card, and it fails. xawtv works fine, and 2.6.14-rc5 used to work fine.

On git 3b44f137b9a846c5452d9e6e1271b79b1dbcc942 :

$ mplayer  tv://1 -tv driver=v4l2
MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

Failed to open /dev/rtc: Permission denied (it should be readable by the user.)
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : Permission denied
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing tv://1.
Cache fill: 0.00% (0 bytes)
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUV420
v4l2: current audio mode is : MONO
v4l2: ioctl queue buffer failed: Bad address
v4l2: 0 frames successfully processed, 0 frames dropped.

At Thu, 03 Nov 2005 13:26:25 +0900,

Quoted 146 lines · Junichi Uekawa

Hi,

I've noticed that mencoder no longer works with bttv capture on my system; with today's git tree (ec1890c5df451799dec969a3581ff72e1934b5ee), while it used to work on 2.6.14-rc5.
xawtv functions.
I'm looking for people who experienced the same problem, or possibly for a fix.

The devices are:
0000:03:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:03:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 0000:03:0b.0 0400: 109e:036e (rev 11)
0000:03:0b.1 0480: 109e:0878 (rev 11)

I'm using mencoder Debian package '1:1.0-pre7cvs20051102-0.0' from marillat's for x86_64 architecture.

$ mencoder --version
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

--version is not an MEncoder option

Exiting... (error parsing cmdline)

Linux dancer64 2.6.14-rc5dancer-gb563c9b1 #1 Thu Oct 27 12:55:05 JST 2005 x86_64 GNU/Linux mencoder output on 2.6.14 (today's git)

channel: 12
minutes: 30
output filename: /home/dancer/XXX/XXX/
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices (Family: 8, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: Type: 8 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

File not found: 'frameno.avi'
Failed to open frameno.avi
success: format: 9 data: 0x0 - 0x0
TV detected! ;-)
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
Selected channel: 12 (freq: 217.250)
v4l2: ioctl queue buffer failed: Bad address

Linux dancer64 2.6.14-rc5dancer-gb563c9b1 #1 Thu Oct 27 12:55:05 JST 2005 x86_64 GNU/Linux

mencoder output on 2.6.14-rc5:
channel: 12
minutes: 1
output filename: /tmp/aaaa.avi
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

success: format: 9 data: 0x0 - 0x0
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
Selected channel: 12 (freq: 217.250)
[V] filefmt:9 fourcc:0x30323449 size:320x240 fps:29.97 ftime:=0.0334
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 320 x 240 (preferred colorspace: Planar I420)
VDec: using Planar I420 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (320x240 fourcc=34504d46 [FMP4])
High quality encoding selected (non real time)!
Selected video codec: [rawi420] vfm: raw (RAW I420)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
MP3 audio selected
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
Writing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Forcing audio preload to 0, max pts correction to 0
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
Pos: 4.1s 124f ( 0%) 26fps Trem: 0min 0mb A-V:0.000 [1082:128]
Flushing video frames

CBR audio: 16000 bytes/sec, 384 bytes/block

Writing AVI index...
Fixing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.

Video stream: 1082.222 kbit/s (135277 B/s) size: 559707 bytes 4.137 secs 124 frames

Audio stream: 128.000 kbit/s (16000 B/s) size: 66048 bytes 4.128 secs
v4l2: 139 frames successfully processed, 0 frames dropped.

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#2 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Quoted 5 lines · Junichi Uekawa

Hi,

I've tried running mplayer v4l2 input on a bt878 card, and it fails. xawtv works fine, and 2.6.14-rc5 used to work fine.

Quoted 10 lines

On git 3b44f137b9a846c5452d9e6e1271b79b1dbcc942 :

$ mplayer  tv://1 -tv driver=v4l2
MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

BTTV currently only supports v4l1. We are still in the process of porting the bttv driver from v4l1 to v4l2. Nickolay is working on it.

-Michael Krufky

Quoted 185 lines

Failed to open /dev/rtc: Permission denied (it should be readable by the user.)
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : Permission denied
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing tv://1.
Cache fill: 0.00% (0 bytes)
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUV420
v4l2: current audio mode is : MONO
v4l2: ioctl queue buffer failed: Bad address
v4l2: 0 frames successfully processed, 0 frames dropped.

At Thu, 03 Nov 2005 13:26:25 +0900,

Quoted 134 lines · Junichi Uekawa

Hi,

I've noticed that mencoder no longer works with bttv capture on my system; with today's git tree (ec1890c5df451799dec969a3581ff72e1934b5ee), while it used to work on 2.6.14-rc5.
xawtv functions.
I'm looking for people who experienced the same problem,
or possibly for a fix.

The devices are:
0000:03:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 0000:03:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 0000:03:0b.0 0400: 109e:036e (rev 11)
0000:03:0b.1 0480: 109e:0878 (rev 11)

I'm using mencoder Debian package '1:1.0-pre7cvs20051102-0.0' from marillat's for x86_64 architecture.

$ mencoder --version
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

--version is not an MEncoder option

Exiting... (error parsing cmdline)

Linux dancer64 2.6.14-rc5dancer-gb563c9b1 #1 Thu Oct 27 12:55:05 JST 2005 x86_64 GNU/Linux mencoder output on 2.6.14 (today's git)

channel: 12
minutes: 30
output filename: /home/dancer/XXX/XXX/
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices (Family: 8, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: Type: 8 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

File not found: 'frameno.avi'
Failed to open frameno.avi
success: format: 9 data: 0x0 - 0x0
TV detected! ;-)
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
Selected channel: 12 (freq: 217.250)
v4l2: ioctl queue buffer failed: Bad address

Linux dancer64 2.6.14-rc5dancer-gb563c9b1 #1 Thu Oct 27 12:55:05 JST 2005 x86_64 GNU/Linux

mencoder output on 2.6.14-rc5:
channel: 12
minutes: 1
output filename: /tmp/aaaa.avi
MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

success: format: 9 data: 0x0 - 0x0
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
Selected channel: 12 (freq: 217.250)
[V] filefmt:9 fourcc:0x30323449 size:320x240 fps:29.97 ftime:=0.0334
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 320 x 240 (preferred colorspace: Planar I420)
VDec: using Planar I420 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (320x240 fourcc=34504d46 [FMP4])
High quality encoding selected (non real time)!
Selected video codec: [rawi420] vfm: raw (RAW I420)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
MP3 audio selected
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
Writing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Forcing audio preload to 0, max pts correction to 0
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.
Pos: 4.1s 124f ( 0%) 26fps Trem: 0min 0mb A-V:0.000 [1082:128]
Flushing video frames

CBR audio: 16000 bytes/sec, 384 bytes/block

Writing AVI index...
Fixing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.

Video stream: 1082.222 kbit/s (135277 B/s) size: 559707 bytes 4.137 secs 124 frames

Quoted 11 lines

Audio stream: 128.000 kbit/s (16000 B/s) size: 66048 bytes 4.128 secs
v4l2: 139 frames successfully processed, 0 frames dropped.

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 1 line
Michael Krufky
#3 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Hi,

Quoted 13 lines
Quoted 13 lines

I've tried running mplayer v4l2 input on a bt878 card, and it fails. xawtv works fine, and 2.6.14-rc5 used to work fine.

On git 3b44f137b9a846c5452d9e6e1271b79b1dbcc942 :

$ mplayer  tv://1 -tv driver=v4l2
MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
Quoted 3 lines

BTTV currently only supports v4l1. We are still in the process of porting the bttv driver from v4l1 to v4l2. Nickolay is working on it.

Thanks for the info. It's strange since this is a regression (pre 2.6.14 used to work. New code made it fail).
Do you mean there was a change that broke v4l2 support in bttv ? Ever since Linux Kernel 2.6.3, I used v4l2 for recording (more than one and a half years...)

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#4 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Quoted 14 lines · Junichi Uekawa

Hi,

Quoted 12 lines
Quoted 12 lines

I've tried running mplayer v4l2 input on a bt878 card, and it fails. xawtv works fine, and 2.6.14-rc5 used to work fine.

On git 3b44f137b9a846c5452d9e6e1271b79b1dbcc942 :

$ mplayer  tv://1 -tv driver=v4l2
MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
Quoted 9 lines
Quoted 2 lines

bttv currently only supports v4l1. We are still in the process of porting the bttv driver from v4l1 to v4l2. Nickolay is working on it.

Thanks for the info. It's strange since this is a regression (pre 2.6.14 used to work. New code made it fail).
Do you mean there was a change that broke v4l2 support in bttv ? Ever since Linux Kernel 2.6.3, I used v4l2 for recording (more than one and a half years...)

v4l2 support could not have been broken, since it was never present. You were going through a compat layer.... Maybe that's where the regression is.

Anyhow, I will discuss this with the other v4l guys... One of us will get back to you, maybe ask you to test a patch or two.

One question -- At exactly what point does this break for you? The git commit key above was from today, but at what point did this LAST work for you? It would be really helpful if you can do a git bisection test, so that we can isolate the trouble patch if in fact it is a regression.

You might also like to join us in #v4l on irc.freenode.net ... Sometimes it's much quicker to troubleshoot this stuff over irc instead of email.

-Michael Krufky

#5 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Hi,

Quoted 17 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
$ mplayer  tv://1 -tv driver=v4l2
MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2
Quoted 10 lines
Quoted 3 lines

bttv currently only supports v4l1. We are still in the process of porting the bttv driver from v4l1 to v4l2. Nickolay is working on it.

Thanks for the info. It's strange since this is a regression (pre 2.6.14 used to work. New code made it fail).
Do you mean there was a change that broke v4l2 support in bttv ? Ever since Linux Kernel 2.6.3, I used v4l2 for recording (more than one and a half years...)

Quoted 8 lines

v4l2 support could not have been broken, since it was never present. You were going through a compat layer.... Maybe that's where the regression is.

One question -- At exactly what point does this break for you? The git commit key above was from today, but at what point did this LAST work for you? It would be really helpful if you can do a git bisection test, so that we can isolate the trouble patch if in fact it is a regression.

df70b17f88a4d1d8545d3569a1f6d28c6004f9e4 2 Nov 2005 Nonfunctional bttv d83c671fb7023f69a9582e622d01525054f23b66 1 Nov 2005 (fails to boot due to USB issues) 6e9d6b8ee4e0c37d3952256e6472c57490d6780d 27 Oct 2005 Functional bttv

Quoted 2 lines

You might also like to join us in #v4l on irc.freenode.net ... Sometimes it's much quicker to troubleshoot this stuff over irc instead of email.

joined, but currently rebooting sporadically to test different kernels.

regards,
junichi

#6 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Quoted 18 lines · Junichi Uekawa
Quoted 18 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

mplayer tv://1 -tv driver=v4l2
MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

Quoted 8 lines
Quoted 2 lines

bttv currently only supports v4l1. We are still in the process of porting the bttv driver from v4l1 to v4l2. Nickolay is working on it.

Thanks for the info. It's strange since this is a regression (pre 2.6.14 used to work. New code made it fail).
Do you mean there was a change that broke v4l2 support in bttv ? Ever since Linux Kernel 2.6.3, I used v4l2 for recording (more than one and a half years...)

v4l2 support could not have been broken, since it was never present. You were going through a compat layer.... Maybe that's where the regression is.

Quoted 8 lines
Quoted 3 lines

One question -- At exactly what point does this break for you? The git commit key above was from today, but at what point did this LAST work for you? It would be really helpful if you can do a git bisection test, so that we can isolate the trouble patch if in fact it is a regression.

df70b17f88a4d1d8545d3569a1f6d28c6004f9e4 2 Nov 2005 Nonfunctional bttv d83c671fb7023f69a9582e622d01525054f23b66 1 Nov 2005 (fails to boot due to USB issues) 6e9d6b8ee4e0c37d3952256e6472c57490d6780d 27 Oct 2005 Functional bttv

This info was quite helpful... Looking through gitweb, it looks like the trouble began for you BEFORE Mauro started to send our new patchsets over to akpm. If I am correct, this indicates that the problem patch is from elsewhere in the kernel.

I saw a thread about some i2c related bttv problem... I don't know if that's a red herring or not, but it was also around the time that you say your kernel breaks.

At this point, the best thing that you can do is run a git bisection regression test, like I had previously suggested. Linus has written a HOWTO thread about it a few months ago on LKML. Does anybody know if there is a howto online for git bisection testing? Maybe there's a copy of the thread on kerneltrap.org? just a guess...

If we can narrow this down to the exact patch that is causing the problem for you, it would be a lot easier to deal with.

Quoted 6 lines
Quoted 3 lines

You might also like to join us in #v4l on irc.freenode.net ... Sometimes it's much quicker to troubleshoot this stuff over irc instead of email.

joined, but currently rebooting sporadically to test different kernels.

Okay, well here are a few other things that I would have you try:

#1) Try using v4l-kernel cvs, and tell us if you still have the problem. Since I think that the problem is occurring for you elsewhere in the kernel, using our code in cvs should yeild no change in behavior. Even though this doesn't sound promising, it can help us to prove whether v4l is responsible for this problem or not:

http://linuxtv.org/v4lwiki/index.php/How_to_build_from_CVS

First, try out latest cvs. Yes, there is still some new code in cvs that we have not yet sent upstream, including some compat_ioctl32.c fixes from Nickolay from this morning.

#2) After testing the latest cvs, then I would ask for you to wipe out the cvs tree and try again, but using older code..... Say, from October first or so, maybe even September first. To do this, follow the same procedure in the wiki-howto above, but add the -D parameter to the cvs checkout command. ( cvs co -D 2005-09-01 -- see man cvs)

I would assume that there will be no difference in behavior between the different cvs versions, but maybe you will find otherwise.

#3) Another thing you can try is to build the current cvs modules against the last known working kernel. If the new cvs modules in the older kernel break it again, then it tells us that some new v4l code IS to blame.

#4) Once again, the -git bisection regression testing is the best thing to do here.

Regards,

Michael Krufky

#7 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

In reply to Junichi Uekawa

Hi,

Quoted 8 lines
Quoted 4 lines

One question -- At exactly what point does this break for you? The git commit key above was from today, but at what point did this LAST work for you? It would be really helpful if you can do a git bisection test, so that we can isolate the trouble patch if in fact it is a regression.

df70b17f88a4d1d8545d3569a1f6d28c6004f9e4 2 Nov 2005 Nonfunctional bttv d83c671fb7023f69a9582e622d01525054f23b66 1 Nov 2005 (fails to boot due to USB issues) 6e9d6b8ee4e0c37d3952256e6472c57490d6780d 27 Oct 2005 Functional bttv

That was wrong; I re-tested it and it looks like 6e9d6b8ee4e0c37d3952256e6472c57490d6780d was a bad one. 2.6.14 (741b2252a5e14d6c60a913c77a6099abe73a854a) is functional.

$ git-bisect start
$ git-bisect bad 6e9d6b8ee4e0c37d3952256e6472c57490d6780d
$ git-bisect good 741b2252a5e14d6c60a913c77a6099abe73a854a
Bisecting: 721 revisions left to test after this

regards,
junichi

#8 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Quoted 10 lines · Junichi Uekawa
Quoted 5 lines
Quoted 5 lines

One question -- At exactly what point does this break for you? The git commit key above was from today, but at what point did this LAST work for you? It would be really helpful if you can do a git bisection test, so that we can isolate the trouble patch if in fact it is a regression.

$ git-bisect start
$ git-bisect bad 6e9d6b8ee4e0c37d3952256e6472c57490d6780d
$ git-bisect good 741b2252a5e14d6c60a913c77a6099abe73a854a
Bisecting: 721 revisions left to test after this

This is probably going to converge on the PageReserved removal patch, and the way get_user_pages now refuses on a VM_RESERVED vma.

I don't want to send you a patch for that immediately, we're still thinking through the implications of allowing VM_RESERVED there again (it might just hit another BUG, or leak memory). And we probably need to take the separate "vbetool" problem into account too.

Though if you're curious and impatient, you could try just editing the " | VM_RESERVED" out of mm/memory.c get_user_pages.

Hugh

#16 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

In reply to Junichi Uekawa

Hi,

Quoted 8 lines

That was wrong; I re-tested it and it looks like 6e9d6b8ee4e0c37d3952256e6472c57490d6780d was a bad one. 2.6.14 (741b2252a5e14d6c60a913c77a6099abe73a854a) is functional.

$ git-bisect start
$ git-bisect bad 6e9d6b8ee4e0c37d3952256e6472c57490d6780d
$ git-bisect good 741b2252a5e14d6c60a913c77a6099abe73a854a
Bisecting: 721 revisions left to test after this

After that I tried:

$ git-bisect bad
Bisecting: 1966 revisions left to test after this
[23fd07750a789a66fe88cf173d52a18f1a387da4] Merge ../linux-2.6 by hand

I'm not quite sure why the following happened. 6e9d6b8ee4e0c37d3952256e6472c57490d6780d 30 Oct is broken 741b2252a5e14d6c60a913c77a6099abe73a854a 27 Oct is functional 6e6ece5dc6022e8086c565498d23511bbceda811 10 Nov is broken 23fd07750a789a66fe88cf173d52a18f1a387da4 31 Oct -- does not boot due to USB/PCI quirks

Maybe I'm doing something wrong.

$ git-bisect log
git-bisect start
# bad: [6e9d6b8ee4e0c37d3952256e6472c57490d6780d] Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
git-bisect bad 6e9d6b8ee4e0c37d3952256e6472c57490d6780d
# good: [741b2252a5e14d6c60a913c77a6099abe73a854a] Linux v2.6.14
git-bisect good 741b2252a5e14d6c60a913c77a6099abe73a854a
# bad: [6e6ece5dc6022e8086c565498d23511bbceda811] PCI: fix for Toshiba ohci1394 quirk
git-bisect bad 6e6ece5dc6022e8086c565498d23511bbceda811

regards,
junichi

#17 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Hello again;

We just got confirmation from someone at freenode that this problem
exists with other chips as well (saa7134, in this case), so it's not chip dependent. It seems to be confined to x86_64 and 2.6.15, though.

Quoted 44 lines · Junichi Uekawa

Hi,

Quoted 8 lines

That was wrong; I re-tested it and it looks like 6e9d6b8ee4e0c37d3952256e6472c57490d6780d was a bad one. 2.6.14 (741b2252a5e14d6c60a913c77a6099abe73a854a) is functional.

$ git-bisect start
$ git-bisect bad 6e9d6b8ee4e0c37d3952256e6472c57490d6780d
$ git-bisect good 741b2252a5e14d6c60a913c77a6099abe73a854a
Bisecting: 721 revisions left to test after this

After that I tried:

$ git-bisect bad
Bisecting: 1966 revisions left to test after this
[23fd07750a789a66fe88cf173d52a18f1a387da4] Merge ../linux-2.6 by hand

I'm not quite sure why the following happened. 6e9d6b8ee4e0c37d3952256e6472c57490d6780d 30 Oct is broken 741b2252a5e14d6c60a913c77a6099abe73a854a 27 Oct is functional 6e6ece5dc6022e8086c565498d23511bbceda811 10 Nov is broken 23fd07750a789a66fe88cf173d52a18f1a387da4 31 Oct -- does not boot due to USB/PCI quirks

Maybe I'm doing something wrong.

$ git-bisect log
git-bisect start
# bad: [6e9d6b8ee4e0c37d3952256e6472c57490d6780d] Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
git-bisect bad 6e9d6b8ee4e0c37d3952256e6472c57490d6780d
# good: [741b2252a5e14d6c60a913c77a6099abe73a854a] Linux v2.6.14
git-bisect good 741b2252a5e14d6c60a913c77a6099abe73a854a
# bad: [6e6ece5dc6022e8086c565498d23511bbceda811] PCI: fix for Toshiba ohci1394 quirk
git-bisect bad 6e6ece5dc6022e8086c565498d23511bbceda811

regards,
junichi

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

Signature · 5 lines
Ricardo Cerqueira
ISP - Service & Platform Architectures
Novis Telecom -  Estrada da Outurela, 118 A / 2795-606 Carnaxide /
Portugal
Tel: +351 2 1010 4686 - Fax: +351 2 1012 9248
#9 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

In reply to Hugh Dickins

Hello all.

We have even found the hack that fix that problem:

Index: linux/drivers/media/video/video-buf.c
===================================================================
RCS file: /cvs/video4linux/v4l-kernel/linux/drivers/media/video/video-buf.c,v retrieving revision 1.21

drivers/media/video/video-buf.c 12 Nov 2005 22:19:13 -0000 renamed from drivers/media/video/video-buf.c 16 Oct 2005 12:13:58 -0000 +1 -1
diff -u -p -r1.21 video-buf.c
@@ -1248,7 +1248,7 @@ int videobuf_mmap_mapper(struct videobuf
        map->end      = vma->vm_end;
        map->q        = q;
        vma->vm_ops   = &videobuf_vm_ops;
-       vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
+       vma->vm_flags |= VM_DONTEXPAND;
        vma->vm_flags &= ~VM_IO; /* using shared anonymous pages */
        vma->vm_private_data = map;
        dprintk(1,"mmap %p: q=%p %08lx-%08lx pgoff %08lx bufs %d-%d\n",

Somehow since 2.6.15-rc1 VM_RESERVED makes get_user_pages return EFAULT. I don't know the exact reason of that behavior and the correct way to fix that problem. Just kernel interfaces changed once again, the old point everyone knows. So if someone can explain it, that would be helpful.

#10 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Quoted 3 lines · Nickolay V. Shmyrev

Hello all.

We have even found the hack that fix that problem:

A hack, but working one..
(for the small while that I tested it)

Quoted 17 lines

Index: linux/drivers/media/video/video-buf.c
===================================================================
RCS file: /cvs/video4linux/v4l-kernel/linux/drivers/media/video/video-buf.c,v retrieving revision 1.21
diff -u -p -r1.21 video-buf.c

drivers/media/video/video-buf.c 12 Nov 2005 22:19:13 -0000 renamed from drivers/media/video/video-buf.c 16 Oct 2005 12:13:58 -0000 +1 -1
@@ -1248,7 +1248,7 @@ int videobuf_mmap_mapper(struct videobuf
        map->end      = vma->vm_end;
        map->q        = q;
        vma->vm_ops   = &videobuf_vm_ops;
-       vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
+       vma->vm_flags |= VM_DONTEXPAND;
        vma->vm_flags &= ~VM_IO; /* using shared anonymous pages */
        vma->vm_private_data = map;
        dprintk(1,"mmap %p: q=%p %08lx-%08lx pgoff %08lx bufs %d-%d\n",
Quoted 4 lines

Somehow since 2.6.15-rc1 VM_RESERVED makes get_user_pages return EFAULT. I don't know the exact reason of that behavior and the correct way to fix that problem. Just kernel interfaces changed once again, the old point everyone knows. So if someone can explain it, that would be helpful.

This EFAULT rejection is due to change in get_user_pages() function in mm/memory.c file of 2.6.14-git2

@@ -945,8 +947,8 @@ int get_user_pages(struct task_struct *t

                        continue;
                }

- if (!vma || (vma->vm_flags & VM_IO)
- || !(flags & vma->vm_flags))
+ if (!vma || (vma->vm_flags & (VM_IO | VM_RESERVED))
+ || !(vm_flags & vma->vm_flags))

                        return i ? : -EFAULT;
 
                if (is_vm_hugetlb_page(vma)) {

I don't know how to use git tools to see, whose patch actually did this particular change.

/Matti Aarnio

#11 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Hi,

Quoted 17 lines

This EFAULT rejection is due to change in get_user_pages() function in mm/memory.c file of 2.6.14-git2

(quoted diff) +2 -2
@@ -945,8 +947,8 @@ int get_user_pages(struct task_struct *t
                        continue;
                }
 
-               if (!vma || (vma->vm_flags & VM_IO)
-                               || !(flags & vma->vm_flags))
+               if (!vma || (vma->vm_flags & (VM_IO | VM_RESERVED))
+                               || !(vm_flags & vma->vm_flags))
                        return i ? : -EFAULT;
 
                if (is_vm_hugetlb_page(vma)) {
Quoted 2 lines

I don't know how to use git tools to see, whose patch actually did this particular change.

To quote:

Quoted 3 lines

MAP_PRIVATE, PROT_WRITE of VM_RESERVED regions is tentatively being deprecated. We never completely handled it correctly anyway, and is be reintroduced in future if required (Hugh has a proof of concept).

diff-tree b5810039a54e5babf428e9a1e89fc1940fabff11 (from f9c98d0287de42221c62448Author: Nick Piggin <[email protected]>
Date: Sat Oct 29 18:16:12 2005 -0700

[PATCH] core remove PageReserved

Remove PageReserved() calls from core code by tightening VM_RESERVED handling in mm/ to cover PageReserved functionality.

PageReserved special casing is removed from get_page and put_page.

All setting and clearing of PageReserved is retained, and it is now flagged in the page_alloc checks to help ensure we don't introduce any refcount based freeing of Reserved pages.

MAP_PRIVATE, PROT_WRITE of VM_RESERVED regions is tentatively being deprecated. We never completely handled it correctly anyway, and is be reintroduced in future if required (Hugh has a proof of concept).

Once PageReserved() calls are removed from kernel/power/swsusp.c, and all arch/ and driver code, the Set and Clear calls, and the PG_reserved bit can be trivially removed.

Last real user of PageReserved is swsusp, which uses PageReserved to determine whether a struct page points to valid memory or not. This still needs to be addressed (a generic page_is_ram() should work).

A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and thus mapcounted and count towards shared rss). These writes to the struct page could cause excessive cacheline bouncing on big systems. There are a number of ways this could be addressed if it is an issue.

Refcount bug fix for filemap_xip.c

I think the relevant changes (snipped out) are:

include/linux/mm.h +1 -1
index 0c64484..da42093 100644
@@ -157,7 +157,7 @@ extern unsigned int kobjsize(const void
 
 #define VM_DONTCOPY    0x00020000      /* Do not copy this vma on fork */
 #define VM_DONTEXPAND  0x00040000      /* Cannot expand with mremap() */
-#define VM_RESERVED    0x00080000      /* Don't unmap it from swap_out */
+#define VM_RESERVED    0x00080000      /* Pages managed in a special way */
 #define VM_ACCOUNT     0x00100000      /* Is a VM accounted object */
 #define VM_HUGETLB     0x00400000      /* Huge TLB Page VM */
 #define VM_NONLINEAR   0x00800000      /* Is non-linear (remap_file_pages) */
mm/memory.c +1 -1
index da642b5..e83f944 100644
@@ -967,7 +992,7 @@ int get_user_pages(struct task_struct *t
                        continue;
                }
 
-               if (!vma || (vma->vm_flags & VM_IO)
+               if (!vma || (vma->vm_flags & (VM_IO | VM_RESERVED))
                                || !(flags & vma->vm_flags))
                        return i ? : -EFAULT;
 

regards,
junichi

#12 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

In reply to Matti Aarnio

В Вск, 13/11/2005 в 04:54 +0200, Matti Aarnio пишет:

Quoted 47 lines · Nickolay V. Shmyrev
Quoted 3 lines

Hello all.

We have even found the hack that fix that problem:

A hack, but working one..
(for the small while that I tested it)

Quoted 17 lines

Index: linux/drivers/media/video/video-buf.c
===================================================================
RCS file: /cvs/video4linux/v4l-kernel/linux/drivers/media/video/video-buf.c,v retrieving revision 1.21
diff -u -p -r1.21 video-buf.c

drivers/media/video/video-buf.c 12 Nov 2005 22:19:13 -0000 renamed from drivers/media/video/video-buf.c 16 Oct 2005 12:13:58 -0000 +1 -1
@@ -1248,7 +1248,7 @@ int videobuf_mmap_mapper(struct videobuf
        map->end      = vma->vm_end;
        map->q        = q;
        vma->vm_ops   = &videobuf_vm_ops;
-       vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
+       vma->vm_flags |= VM_DONTEXPAND;
        vma->vm_flags &= ~VM_IO; /* using shared anonymous pages */
        vma->vm_private_data = map;
        dprintk(1,"mmap %p: q=%p %08lx-%08lx pgoff %08lx bufs %d-%d\n",
Quoted 4 lines

Somehow since 2.6.15-rc1 VM_RESERVED makes get_user_pages return EFAULT. I don't know the exact reason of that behavior and the correct way to fix that problem. Just kernel interfaces changed once again, the old point everyone knows. So if someone can explain it, that would be helpful.

This EFAULT rejection is due to change in get_user_pages() function in mm/memory.c file of 2.6.14-git2

(quoted diff) +2 -2
@@ -945,8 +947,8 @@ int get_user_pages(struct task_struct *t
                        continue;
                }
 
-               if (!vma || (vma->vm_flags & VM_IO)
-                               || !(flags & vma->vm_flags))
+               if (!vma || (vma->vm_flags & (VM_IO | VM_RESERVED))
+                               || !(vm_flags & vma->vm_flags))
                        return i ? : -EFAULT;
 
                if (is_vm_hugetlb_page(vma)) {
Quoted 5 lines

I don't know how to use git tools to see, whose patch actually did this particular change.

/Matti Aarnio

It's sad, but I still don't understand the way it should be fixed. Removal of VM_RESERVED is certainly not a solution, since we don't going to swap mmaped pages and VM_RESERVED is used in other drivers (for example, some sound drivers)

So, we need to find the problem itself. After looking at the code I've found that the x86_64 dependency of that problem lies in the check in memory.c:get_user_pages

if (vma && in_gate_area (task, start))

x86_64 defines it's own arch-dependant function in_gate_area which fails in our case. Can someone trace that code and find why do we fail and fail only on x86_64. It would be nice if someone could point me to get_user_pages documentation, why it's so differently behaves for 64 bit arch.

Also it seems that I had traces of video-buf module with debug enabled on 64 bit, but lost them. Can someone just enable debug option to video- buf module and collect those traces.

#13 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

Quoted 5 lines · Nickolay V. Shmyrev

It's sad, but I still don't understand the way it should be fixed. Removal of VM_RESERVED is certainly not a solution, since we don't going to swap mmaped pages and VM_RESERVED is used in other drivers (for example, some sound drivers)

Early in this thread (last Friday) I said that I was working on the fix for this and some other PageReserved removal problems.

I suggested then:
Though if you're curious and impatient, you could try just editing the " | VM_RESERVED" out of mm/memory.c get_user_pages.

Does that not work for you? It's not the full solution to all the issues, but I'd expect it to be enough to get you going. If it does not work for you, then I need to understand why not in a hurry:
please let me know either way.

I'm at last getting near with my patches, hope to post later tonight (but everything always takes me longer than I expect).

Quoted 8 lines

So, we need to find the problem itself. After looking at the code I've found that the x86_64 dependency of that problem lies in the check in memory.c:get_user_pages

if (vma && in_gate_area (task, start))

x86_64 defines it's own arch-dependant function in_gate_area which fails in our case.

Why would you expect "in_gate_area" to pass in your case? I'd be very surprised if the user pages you're trying to get are in the gate area. I doubt that has anything to do with it: please try what I suggested.

Hugh

Quoted 8 lines

Can someone trace that code and find why do we fail and
fail only on x86_64. It would be nice if someone could point me to get_user_pages documentation, why it's so differently behaves for 64 bit arch.

Also it seems that I had traces of video-buf module with debug enabled on 64 bit, but lost them. Can someone just enable debug option to video- buf module and collect those traces.

#15 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

In reply to Nickolay V. Shmyrev

Hi,

Verified that with the following patch, I can run mencoder fine.

$ uname -a 
Linux dancer64 2.6.15-rc1dancer-gf6ff56cd #1 Thu Nov 17 08:18:33 JST 2005 x86_64 GNU/Linux

Applied upon linus' git from yesterday:
commit f6ff56cd56b83d8edf4b3cffc5c53c56b37a5081
tree 0ec4807d49a602ba785e60e5352b542f1581d4c9
parent fb6d73d3014babb69f5cc2d1d78b31e9d09fc5df
parent 5a6f294e43e432bd207a702fea49ebb303ef9b23
author Linus Torvalds <[email protected]> Tue Nov 15 16:59:38 UTC 2005 committer Linus Torvalds <[email protected]> Tue Nov 15 16:59:38 UTC 2005

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Quoted 20 lines

We have even found the hack that fix that problem:

Index: linux/drivers/media/video/video-buf.c
===================================================================
RCS file: /cvs/video4linux/v4l-kernel/linux/drivers/media/video/video-buf.c,v retrieving revision 1.21
diff -u -p -r1.21 video-buf.c

drivers/media/video/video-buf.c 12 Nov 2005 22:19:13 -0000 renamed from drivers/media/video/video-buf.c 16 Oct 2005 12:13:58 -0000 +1 -1
@@ -1248,7 +1248,7 @@ int videobuf_mmap_mapper(struct videobuf
        map->end      = vma->vm_end;
        map->q        = q;
        vma->vm_ops   = &videobuf_vm_ops;
-       vma->vm_flags |= VM_DONTEXPAND | VM_RESERVED;
+       vma->vm_flags |= VM_DONTEXPAND;
        vma->vm_flags &= ~VM_IO; /* using shared anonymous pages */
        vma->vm_private_data = map;
        dprintk(1,"mmap %p: q=%p %08lx-%08lx pgoff %08lx bufs %d-%d\n",
Quoted 4 lines

Somehow since 2.6.15-rc1 VM_RESERVED makes get_user_pages return EFAULT. I don't know the exact reason of that behavior and the correct way to fix that problem. Just kernel interfaces changed once again, the old point everyone knows. So if someone can explain it, that would be helpful.

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#14 lore raw

Re: [x86_64] 2.6.14-git13 mplayer fails with "v4l2: ioctl queue buffer failed: Bad address" (2 Nov 2005, 11 Nov 2005)

In reply to Hugh Dickins

Hi,

Quoted 7 lines

Does that not work for you? It's not the full solution to all the issues, but I'd expect it to be enough to get you going. If it does not work for you, then I need to understand why not in a hurry:
please let me know either way.

I'm at last getting near with my patches, hope to post later tonight (but everything always takes me longer than I expect).

I am assuming that the following patch went in as a fix for this problem. I have tested linus' tree as of today, and bttv works fine on x86_64, problem solved.
Thanks!

commit ed5297a94090d9a9f27b0ce1f9601ebe73561cff
tree 00d28144ae949b3f9d566279cb12be0c802f86e6
parent aa1a64ee12ae130706f3fc0007841ce9b0ddf9c2
author Hugh Dickins <[email protected]>
committer Linus Torvalds <[email protected]>
[PATCH] unpaged: get_user_pages VM_RESERVED

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#19 lore raw

[x86_64] linux 2.6.15-rc6 mplayer fails to record ALSA audio.

In reply to a message not in the archive

Hi,

With today's git tree I'm still experiencing the same problem that audio isn't captured with mencoder.

Linux dancer64 2.6.15-rc6dancer-gdf7addbb #1 Mon Dec 19 23:18:41 JST 2005 x86_64 GNU/Linux

successful recording is done with 2.6.14-rc5, failure case is done with 2.6.15-rc6, I'm suspecting that v4l is giving some wrong ideas about audio information to mencoder.

MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

success: format: 9 data: 0x0 - 0x0
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
Selected channel: 12 (freq: 217.250)
[V] filefmt:9 fourcc:0x30323449 size:320x240 fps:29.97 ftime:=0.0334
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 320 x 240 (preferred colorspace: Planar I420)
VDec: using Planar I420 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (320x240 fourcc=34504d46 [FMP4])
High quality encoding selected (non real time)!
Selected video codec: [rawi420] vfm: raw (RAW I420)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
MP3 audio selected
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le...
Writing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Forcing audio preload to 0, max pts correction to 0
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.

MEncoder dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team
CPU: Advanced Micro Devices Athlon 64 Newcastle,Winchester,San Diego,Venice; Sempron Palermo (Family: 15, Stepping: 0) Detected cache-line size is 64 bytes
CPUflags: Type: 15 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2

success: format: 9 data: 0x0 - 0x0
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: BT878 video (IODATA GV-BCTV5/PC
Tuner cap:
Tuner rxs: MONO
Capabilites: video capture video overlay VBI capture device tuner read/write streaming supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUV420
v4l2: current audio mode is : STEREO
Selected channel: 12 (freq: 217.250)
[V] filefmt:9 fourcc:0x30323449 size:320x240 fps:29.97 ftime:=0.0334
Opening video filter: [expand osd=1]
Expand: -1 x -1, -1 ; -1, osd: 1, aspect: 0.000000, round: 1
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
VDec: vo config request - 320 x 240 (preferred colorspace: Planar I420)
VDec: using Planar I420 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
videocodec: libavcodec (320x240 fourcc=34504d46 [FMP4])
High quality encoding selected (non real time)!
Selected video codec: [rawi420] vfm: raw (RAW I420)
==========================================================================
Writing AVI header...
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header. Forcing audio preload to 0, max pts correction to 0
New_Face failed. Maybe the font path is wrong.
Please supply the text font file (~/.mplayer/subfont.ttf).
subtitle font: load_sub_face failed.
ODML: Aspect information not (yet?) available or unspecified, not writing vprp header.

Quoted 22 lines

The last version known to work: 2.6.14-rc5 (probably 2.6.15 works also)

With 2.6.15-rc3 or so, with the following fix, bttv started functioning.

Quoted 6 lines

commit ed5297a94090d9a9f27b0ce1f9601ebe73561cff
tree 00d28144ae949b3f9d566279cb12be0c802f86e6
parent aa1a64ee12ae130706f3fc0007841ce9b0ddf9c2
author Hugh Dickins <[email protected]>
committer Linus Torvalds <[email protected]>
[PATCH] unpaged: get_user_pages VM_RESERVED

However, mplayer doesn't want to read from ALSA input, and no sound is recorded.

I'm trying to record video from /dev/video0, and audio from ALSA,0,0 (which is ATIIXP card). Audio is physically routed from the video capture board to ATIIXP card.

I'm attaching the encoding script I use, and strace output for 2.6.14-rc5 and 2.6.15-rc5.

Quoted 42 lines

I'm using Debian sid, and this regression is killing me...

If you know of good fix, or know of a reason of this breakage, I'm all ears.

regards,
junichi

Signature · 33 lines
dancer@{debian.org,netfort.gr.jp}   Debian Project


[2 encodetv.sh-strace <application/octet-stream (7bit)>]
#!/bin/bash
#interactive script to encode TV.

if [[ $# != 3 ]]; then
    echo "encodetv [channel] [minutes] [output filename]"
    exit 0;
fi
echo "channel: $1"
CHANNEL=$1
echo "minutes: $2"
MINUTES=$2
echo "output filename: $3"
OUTFILE=$3

strace -f \
mencoder tv://${CHANNEL} \
      -tv \
                  driver=v4l2:\
device=/dev/video0:\
width=320:\
height=240:\
normid=6:\
alsa:\
amode=1:\
adevice=ixp:\
chanlist=japan-bcast:\
forcechan=2:\
 -o "${OUTFILE}.avi" \
-ovc lavc -lavcopts vcodec=mpeg4:vhq -oac mp3lame -lameopts br=128:cbr:mode=0  -endpos $(( 60 * $MINUTES ))

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#20 lore raw

Re: [x86_64] linux 2.6.15-rc6 mplayer fails to record ALSA audio.

Hi,

With recent git tree I'm still experiencing the same problem that audio isn't captured with mencoder.

$ uname -a 
Linux dancer64 2.6.15dancer-ga4fc7ab1-dirty #1 Thu Jan 12 08:32:49 JST 2006 x86_64 GNU/Linux

last successful one was 2.6.14-rc5.

I've noticed that there is a v4l-info command, which dumps v4l2 information, and it seems to signify that v4l2 is giving a different answer.

The following is a diff, which seems to signify that this difference exists in the two versions:

- audioset : 1
+ audioset : 0

What caused this change and how to revert is a mystery, yet.

$ diff -u 261[45]/v4l-info
--- 2614/v4l-info	2006-01-14 16:22:58.000000000 +0900
+++ 2615/v4l-info	2006-01-14 16:19:00.000000000 +0900
@@ -25,7 +25,7 @@
 	framelines              : 525
     VIDIOC_ENUMSTD(2)
 	index                   : 2
-	id                      : 0x7f0000 [SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L]
+	id                      : 0xff0000 [SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
 	name                    : "SECAM"
 	frameperiod.numerator   : 1
 	frameperiod.denominator : 25
@@ -71,25 +71,25 @@
 	index                   : 0
 	name                    : "Television"
 	type                    : TUNER
-	audioset                : 1
+	audioset                : 0
 	tuner                   : 0
-	std                     : 0x7f3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L]
+	std                     : 0xff3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
 	status                  : 0x100 [NO_H_LOCK]
     VIDIOC_ENUMINPUT(1)
 	index                   : 1
 	name                    : "Composite1"
 	type                    : CAMERA
-	audioset                : 1
+	audioset                : 0
 	tuner                   : 0
-	std                     : 0x7f3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L]
+	std                     : 0xff3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
 	status                  : 0x0 []
     VIDIOC_ENUMINPUT(2)
 	index                   : 2
 	name                    : "S-Video"
 	type                    : CAMERA
-	audioset                : 1
+	audioset                : 0
 	tuner                   : 0
-	std                     : 0x7f3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L]
+	std                     : 0xff3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
 	status                  : 0x0 []

tuners
@@ -98,8 +98,8 @@

 	name                    : "Television"
 	type                    : ANALOG_TV
 	capability              : 0x2 [NORM]
-	rangelow                : 0
-	rangehigh               : 4294967295
+	rangelow                : 704
+	rangehigh               : 15328
 	rxsubchans              : 0x1 [MONO]
 	audmode                 : MONO
 	signal                  : 0
@@ -332,11 +332,11 @@
     VIDIOC_G_FMT(VBI_CAPTURE)
 	type                    : VBI_CAPTURE
 	fmt.vbi.sampling_rate   : 35468950
-	fmt.vbi.offset          : 244
+	fmt.vbi.offset          : 128
 	fmt.vbi.samples_per_line: 2048
 	fmt.vbi.sample_format   : 0x59455247 [GREY]
 	fmt.vbi.start[0]        : 7
-	fmt.vbi.start[1]        : 319
+	fmt.vbi.start[1]        : 320
 	fmt.vbi.count[0]        : 16
 	fmt.vbi.count[1]        : 16
 	fmt.vbi.flags           : 0

full output of v4l-info:
### v4l2 device info [/dev/video0] ###
general info
VIDIOC_QUERYCAP
driver : "bttv"
card : "BT878 video (IODATA GV-BCTV5/PC"
bus_info : "PCI:0000:03:0b.0"
version : 0.9.16
capabilities : 0x5010015 [VIDEO_CAPTURE,VIDEO_OVERLAY,VBI_CAPTURE,TUNER,READWRITE,STREAMING]

standards
VIDIOC_ENUMSTD(0)
index : 0
id : 0xff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K]
name : "PAL"
frameperiod.numerator : 1
frameperiod.denominator : 25
framelines : 625
VIDIOC_ENUMSTD(1)
index : 1
id : 0x1000 [NTSC_M]
name : "NTSC"
frameperiod.numerator : 1001
frameperiod.denominator : 30000
framelines : 525
VIDIOC_ENUMSTD(2)
index : 2
id : 0xff0000 [SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
name : "SECAM"
frameperiod.numerator : 1
frameperiod.denominator : 25
framelines : 625
VIDIOC_ENUMSTD(3)
index : 3
id : 0x400 [PAL_Nc]
name : "PAL-Nc"
frameperiod.numerator : 1
frameperiod.denominator : 25
framelines : 625
VIDIOC_ENUMSTD(4)
index : 4
id : 0x100 [PAL_M]
name : "PAL-M"
frameperiod.numerator : 1001
frameperiod.denominator : 30000
framelines : 525
VIDIOC_ENUMSTD(5)
index : 5
id : 0x200 [PAL_N]
name : "PAL-N"
frameperiod.numerator : 1
frameperiod.denominator : 25
framelines : 625
VIDIOC_ENUMSTD(6)
index : 6
id : 0x2000 [NTSC_M_JP]
name : "NTSC-JP"
frameperiod.numerator : 1001
frameperiod.denominator : 30000
framelines : 525
VIDIOC_ENUMSTD(7)
index : 7
id : 0x800 [PAL_60]
name : "PAL-60"
frameperiod.numerator : 1
frameperiod.denominator : 25
framelines : 625

inputs
VIDIOC_ENUMINPUT(0)
index : 0
name : "Television"
type : TUNER
audioset : 0
tuner : 0
std : 0xff3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
status : 0x100 [NO_H_LOCK]
VIDIOC_ENUMINPUT(1)
index : 1
name : "Composite1"
type : CAMERA
audioset : 0
tuner : 0
std : 0xff3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
status : 0x0 []
VIDIOC_ENUMINPUT(2)
index : 2
name : "S-Video"
type : CAMERA
audioset : 0
tuner : 0
std : 0xff3fff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_N,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
status : 0x0 []

tuners
VIDIOC_G_TUNER(0)
index : 0
name : "Television"
type : ANALOG_TV
capability : 0x2 [NORM]
rangelow : 704
rangehigh : 15328
rxsubchans : 0x1 [MONO]
audmode : MONO
signal : 0
afc : 0

video capture
VIDIOC_ENUM_FMT(0,VIDEO_CAPTURE)
index : 0
type : VIDEO_CAPTURE
flags : 0
description : "8 bpp, gray"
pixelformat : 0x59455247 [GREY]
VIDIOC_ENUM_FMT(1,VIDEO_CAPTURE)
index : 1
type : VIDEO_CAPTURE
flags : 0
description : "8 bpp, dithered color"
pixelformat : 0x34324948 [HI24]
VIDIOC_ENUM_FMT(2,VIDEO_CAPTURE)
index : 2
type : VIDEO_CAPTURE
flags : 0
description : "15 bpp RGB, le"
pixelformat : 0x4f424752 [RGBO]
VIDIOC_ENUM_FMT(3,VIDEO_CAPTURE)
index : 3
type : VIDEO_CAPTURE
flags : 0
description : "15 bpp RGB, be"
pixelformat : 0x51424752 [RGBQ]
VIDIOC_ENUM_FMT(4,VIDEO_CAPTURE)
index : 4
type : VIDEO_CAPTURE
flags : 0
description : "16 bpp RGB, le"
pixelformat : 0x50424752 [RGBP]
VIDIOC_ENUM_FMT(5,VIDEO_CAPTURE)
index : 5
type : VIDEO_CAPTURE
flags : 0
description : "16 bpp RGB, be"
pixelformat : 0x52424752 [RGBR]
VIDIOC_ENUM_FMT(6,VIDEO_CAPTURE)
index : 6
type : VIDEO_CAPTURE
flags : 0
description : "24 bpp RGB, le"
pixelformat : 0x33524742 [BGR3]
VIDIOC_ENUM_FMT(7,VIDEO_CAPTURE)
index : 7
type : VIDEO_CAPTURE
flags : 0
description : "32 bpp RGB, le"
pixelformat : 0x34524742 [BGR4]
VIDIOC_ENUM_FMT(8,VIDEO_CAPTURE)
index : 8
type : VIDEO_CAPTURE
flags : 0
description : "32 bpp RGB, be"
pixelformat : 0x34424752 [RGB4]
VIDIOC_ENUM_FMT(9,VIDEO_CAPTURE)
index : 9
type : VIDEO_CAPTURE
flags : 0
description : "4:2:2, packed, YUYV"
pixelformat : 0x56595559 [YUYV]
VIDIOC_ENUM_FMT(10,VIDEO_CAPTURE)
index : 10
type : VIDEO_CAPTURE
flags : 0
description : "4:2:2, packed, YUYV"
pixelformat : 0x56595559 [YUYV]
VIDIOC_ENUM_FMT(11,VIDEO_CAPTURE)
index : 11
type : VIDEO_CAPTURE
flags : 0
description : "4:2:2, packed, UYVY"
pixelformat : 0x59565955 [UYVY]
VIDIOC_ENUM_FMT(12,VIDEO_CAPTURE)
index : 12
type : VIDEO_CAPTURE
flags : 0
description : "4:2:2, planar, Y-Cb-Cr"
pixelformat : 0x50323234 [422P]
VIDIOC_ENUM_FMT(13,VIDEO_CAPTURE)
index : 13
type : VIDEO_CAPTURE
flags : 0
description : "4:2:0, planar, Y-Cb-Cr"
pixelformat : 0x32315559 [YU12]
VIDIOC_ENUM_FMT(14,VIDEO_CAPTURE)
index : 14
type : VIDEO_CAPTURE
flags : 0
description : "4:2:0, planar, Y-Cr-Cb"
pixelformat : 0x32315659 [YV12]
VIDIOC_ENUM_FMT(15,VIDEO_CAPTURE)
index : 15
type : VIDEO_CAPTURE
flags : 0
description : "4:1:1, planar, Y-Cb-Cr"
pixelformat : 0x50313134 [411P]
VIDIOC_ENUM_FMT(16,VIDEO_CAPTURE)
index : 16
type : VIDEO_CAPTURE
flags : 0
description : "4:1:0, planar, Y-Cb-Cr"
pixelformat : 0x39565559 [YUV9]
VIDIOC_ENUM_FMT(17,VIDEO_CAPTURE)
index : 17
type : VIDEO_CAPTURE
flags : 0
description : "4:1:0, planar, Y-Cr-Cb"
pixelformat : 0x39555659 [YVU9]
VIDIOC_G_FMT(VIDEO_CAPTURE)
type : VIDEO_CAPTURE
fmt.pix.width : 320
fmt.pix.height : 240
fmt.pix.pixelformat : 0x56595559 [YUYV]
fmt.pix.field : INTERLACED
fmt.pix.bytesperline : 640
fmt.pix.sizeimage : 153600
fmt.pix.colorspace : unknown
fmt.pix.priv : 0

video overlay
VIDIOC_ENUM_FMT(0,VIDEO_OVERLAY)
index : 0
type : VIDEO_OVERLAY
flags : 0
description : "8 bpp, gray"
pixelformat : 0x59455247 [GREY]
VIDIOC_ENUM_FMT(1,VIDEO_OVERLAY)
index : 1
type : VIDEO_OVERLAY
flags : 0
description : "8 bpp, dithered color"
pixelformat : 0x34324948 [HI24]
VIDIOC_ENUM_FMT(2,VIDEO_OVERLAY)
index : 2
type : VIDEO_OVERLAY
flags : 0
description : "15 bpp RGB, le"
pixelformat : 0x4f424752 [RGBO]
VIDIOC_ENUM_FMT(3,VIDEO_OVERLAY)
index : 3
type : VIDEO_OVERLAY
flags : 0
description : "15 bpp RGB, be"
pixelformat : 0x51424752 [RGBQ]
VIDIOC_ENUM_FMT(4,VIDEO_OVERLAY)
index : 4
type : VIDEO_OVERLAY
flags : 0
description : "16 bpp RGB, le"
pixelformat : 0x50424752 [RGBP]
VIDIOC_ENUM_FMT(5,VIDEO_OVERLAY)
index : 5
type : VIDEO_OVERLAY
flags : 0
description : "16 bpp RGB, be"
pixelformat : 0x52424752 [RGBR]
VIDIOC_ENUM_FMT(6,VIDEO_OVERLAY)
index : 6
type : VIDEO_OVERLAY
flags : 0
description : "24 bpp RGB, le"
pixelformat : 0x33524742 [BGR3]
VIDIOC_ENUM_FMT(7,VIDEO_OVERLAY)
index : 7
type : VIDEO_OVERLAY
flags : 0
description : "32 bpp RGB, le"
pixelformat : 0x34524742 [BGR4]
VIDIOC_ENUM_FMT(8,VIDEO_OVERLAY)
index : 8
type : VIDEO_OVERLAY
flags : 0
description : "32 bpp RGB, be"
pixelformat : 0x34424752 [RGB4]
VIDIOC_ENUM_FMT(9,VIDEO_OVERLAY)
index : 9
type : VIDEO_OVERLAY
flags : 0
description : "4:2:2, packed, YUYV"
pixelformat : 0x56595559 [YUYV]
VIDIOC_ENUM_FMT(10,VIDEO_OVERLAY)
index : 10
type : VIDEO_OVERLAY
flags : 0
description : "4:2:2, packed, YUYV"
pixelformat : 0x56595559 [YUYV]
VIDIOC_ENUM_FMT(11,VIDEO_OVERLAY)
index : 11
type : VIDEO_OVERLAY
flags : 0
description : "4:2:2, packed, UYVY"
pixelformat : 0x59565955 [UYVY]
VIDIOC_G_FMT(VIDEO_OVERLAY)
type : VIDEO_OVERLAY
fmt.win.w.left : 0
fmt.win.w.top : 0
fmt.win.w.width : 320
fmt.win.w.height : 240
fmt.win.field : ANY
fmt.win.chromakey : 0
fmt.win.clips : (nil)
fmt.win.clipcount : 0
fmt.win.bitmap : (nil)
VIDIOC_G_FBUF
capability : 0x4 [LIST_CLIPPING]
flags : 0x0 []
base : (nil)
fmt.width : 0
fmt.height : 0
fmt.pixelformat : 0x56595559 [YUYV]
fmt.field : ANY
fmt.bytesperline : 0
fmt.sizeimage : 0
fmt.colorspace : unknown
fmt.priv : 0

vbi capture

    VIDIOC_ENUM_FMT(0,VBI_CAPTURE)
	index                   : 0
	type                    : VBI_CAPTURE
	flags                   : 0
	description             : "vbi data"
	pixelformat             : 0x59455247 [GREY]
    VIDIOC_G_FMT(VBI_CAPTURE)
	type                    : VBI_CAPTURE
	fmt.vbi.sampling_rate   : 35468950
	fmt.vbi.offset          : 128
	fmt.vbi.samples_per_line: 2048
	fmt.vbi.sample_format   : 0x59455247 [GREY]
	fmt.vbi.start[0]        : 7
	fmt.vbi.start[1]        : 320
	fmt.vbi.count[0]        : 16
	fmt.vbi.count[1]        : 16
	fmt.vbi.flags           : 0

controls
VIDIOC_QUERYCTRL(BASE+0)
id : 9963776
type : INTEGER
name : "Brightness"
minimum : 0
maximum : 65535
step : 256
default_value : 32768
flags : 0
VIDIOC_QUERYCTRL(BASE+1)
id : 9963777
type : INTEGER
name : "Contrast"
minimum : 0
maximum : 65535
step : 128
default_value : 32768
flags : 0
VIDIOC_QUERYCTRL(BASE+2)
id : 9963778
type : INTEGER
name : "Saturation"
minimum : 0
maximum : 65535
step : 128
default_value : 32768
flags : 0
VIDIOC_QUERYCTRL(BASE+3)
id : 9963779
type : INTEGER
name : "Hue"
minimum : 0
maximum : 65535
step : 256
default_value : 32768
flags : 0
VIDIOC_QUERYCTRL(BASE+9)
id : 9963785
type : BOOLEAN
name : "Mute"
minimum : 0
maximum : 1
step : 0
default_value : 0
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+0)
id : 134217728
type : BOOLEAN
name : "chroma agc"
minimum : 0
maximum : 1
step : 0
default_value : 0
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+1)
id : 134217729
type : BOOLEAN
name : "combfilter"
minimum : 0
maximum : 1
step : 0
default_value : 0
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+2)
id : 134217730
type : BOOLEAN
name : "automute"
minimum : 0
maximum : 1
step : 0
default_value : 0
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+3)
id : 134217731
type : BOOLEAN
name : "luma decimation filter"
minimum : 0
maximum : 1
step : 0
default_value : 0
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+4)
id : 134217732
type : BOOLEAN
name : "agc crush"
minimum : 0
maximum : 1
step : 0
default_value : 0
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+5)
id : 134217733
type : BOOLEAN
name : "vcr hack"
minimum : 0
maximum : 1
step : 0
default_value : 0
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+6)
id : 134217734
type : INTEGER
name : "whitecrush upper"
minimum : 0
maximum : 255
step : 1
default_value : 207
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+7)
id : 134217735
type : INTEGER
name : "whitecrush lower"
minimum : 0
maximum : 255
step : 1
default_value : 127
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+8)
id : 134217736
type : INTEGER
name : "uv ratio"
minimum : 0
maximum : 100
step : 1
default_value : 50
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+9)
id : 134217737
type : BOOLEAN
name : "full luma range"
minimum : 0
maximum : 1
step : 0
default_value : 0
flags : 0
VIDIOC_QUERYCTRL(PRIVATE_BASE+10)
id : 134217738
type : INTEGER
name : "coring"
minimum : 0
maximum : 3
step : 1
default_value : 0
flags : 0

### video4linux device info [/dev/video0] ###
general info
VIDIOCGCAP
name : "BT878 video (IODATA GV-BCTV5/PC"
type : 0xab [CAPTURE,TUNER,OVERLAY,CLIPPING,SCALES]
channels : 3
audios : 1
maxwidth : 924
maxheight : 576
minwidth : 48
minheight : 32

channels
VIDIOCGCHAN(0)
channel : 0
name : "Television"
tuners : 1
flags : 0x3 [TUNER,AUDIO]
type : TV
norm : 0
VIDIOCGCHAN(1)
channel : 1
name : "Composite1"
tuners : 0
flags : 0x2 [AUDIO]
type : CAMERA
norm : 0
VIDIOCGCHAN(2)
channel : 2
name : "S-Video"
tuners : 0
flags : 0x2 [AUDIO]
type : CAMERA
norm : 0

tuner
VIDIOCGTUNER
tuner : 0
name : "Television"
rangelow : 0
rangehigh : 704
flags : 0x0 []
mode : unknown
signal : 0

audio
VIDIOCGAUDIO
audio : 0
volume : 0
bass : 0
treble : 0

picture
VIDIOCGPICT
brightness : 32768
hue : 32768
colour : 32768
contrast : 32768
whiteness : 0
depth : 16
palette : YUV422

buffer
VIDIOCGFBUF
base : (nil)
height : 0
width : 0
depth : 16
bytesperline : 0

window
VIDIOCGWIN
x : 0
y : 0
width : 320
height : 240
chromakey : 0
flags : 0

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#21 lore raw

Re: [x86_64] bttv: linux 2.6.16-rc1 mplayer fails to record ALSA audio and fails tune TV.

Hi,

With 2.6.16-rc1, it's recording no audio, and it's recording black-and-white noise on video. Wooo, it's getting worse.

$ uname -a
Linux dancer64 2.6.16-rc1dancer-dirty #1 Wed Jan 18 08:11:24 JST 2006 x86_64 GNU/Linux
Quoted 1 line

From the information that I've gathered so far it seems like:

1. bttv was rewritten to support v4l2
2. record via v4l2 is broken, v4l1 is not (xawtv works, mencoder broken.) I've heard mencoder should work with v4l1, but I have not yet confirmed.

bttv-cards.c:

[BTTV_BOARD_GVBCTV5PCI] = {
.name = "IODATA GV-BCTV5/PCI",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x0f0f80,
.muxsel = {2, 3, 1, 0 },
.audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = gvbctv5pci_audio,
.has_radio = 1,
},

dmesg gives me an impression that this path is taken properly:
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:03:0b.0, irq: 22, latency: 64, mmio: 0xfdcff000
bttv0: detected: I-O Data Co. GV-BCTV5/PCI [card=81], PCI subsystem ID is 10fc:d018
bttv0: using: IODATA GV-BCTV5/PCI [card=81,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f6f0f7 [init]
bttv0: using tuner=17
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 17 (Philips NTSC_M (MK2))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok

v4l-info is dumped with:

        printf("inputs\n");
        for (i = 0;; i++) {
                memset(&input,0,sizeof(input));
                input.index = i;
                if (-1 == ioctl(fd,VIDIOC_ENUMINPUT,&input))
                        break;
                printf("    VIDIOC_ENUMINPUT(%d)\n",i);
                print_struct(stdout,desc_v4l2_input,&input,"",tab);
        }
        printf("\n");

which is probably handled in
bttv-driver.c:static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)

which unconditionally sets:

                i->audioset = 0;

Review

Quoted 13 lines

last successful one was 2.6.14-rc5.

I've noticed that there is a v4l-info command, which dumps v4l2 information, and it seems to signify that v4l2 is giving a different answer.

The following is a diff, which seems to signify that this difference exists in the two versions:

(quoted diff) +1 -1
-	audioset                : 1
+	audioset                : 0

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#22 lore raw

Re: [x86_64] bttv: linux 2.6.16-rc1 mplayer fails to record ALSA audio and fails tune TV.

Hi,

status update, it's still like this; I probably don't have much time to sit around debugging this problem myself, but if anyone else has met this problem and fixed it, I'd be delighted to know about it.

Linux dancer64 2.6.16-rc1dancer-ga6df590d-dirty #1 Wed Feb 1 18:36:00 JST 2006 x86_64 GNU/Linux

regards,
junichi

Signature · 5 lines
dancer@{debian.org,netfort.gr.jp}   Debian Project



At Fri, 20 Jan 2006 08:11:34 +0900,
Quoted 97 lines · Junichi Uekawa

Hi,

With 2.6.16-rc1, it's recording no audio, and it's recording black-and-white noise on video. Wooo, it's getting worse.

$ uname -a
Linux dancer64 2.6.16-rc1dancer-dirty #1 Wed Jan 18 08:11:24 JST 2006 x86_64 GNU/Linux

From the information that I've gathered so far it seems like:
1. bttv was rewritten to support v4l2
2. record via v4l2 is broken, v4l1 is not (xawtv works, mencoder broken.) I've heard mencoder should work with v4l1, but I have not yet confirmed.

bttv-cards.c:

[BTTV_BOARD_GVBCTV5PCI] = {
.name = "IODATA GV-BCTV5/PCI",
.video_inputs = 3,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
.gpiomask = 0x0f0f80,
.muxsel = {2, 3, 1, 0 },
.audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.audio_hook = gvbctv5pci_audio,
.has_radio = 1,
},

dmesg gives me an impression that this path is taken properly:
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:03:0b.0, irq: 22, latency: 64, mmio: 0xfdcff000
bttv0: detected: I-O Data Co. GV-BCTV5/PCI [card=81], PCI subsystem ID is 10fc:d018
bttv0: using: IODATA GV-BCTV5/PCI [card=81,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f6f0f7 [init]
bttv0: using tuner=17
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 17 (Philips NTSC_M (MK2))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok

v4l-info is dumped with:

        printf("inputs\n");
        for (i = 0;; i++) {
                memset(&input,0,sizeof(input));
                input.index = i;
                if (-1 == ioctl(fd,VIDIOC_ENUMINPUT,&input))
                        break;
                printf("    VIDIOC_ENUMINPUT(%d)\n",i);
                print_struct(stdout,desc_v4l2_input,&input,"",tab);
        }
        printf("\n");

which is probably handled in
bttv-driver.c:static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)

which unconditionally sets:

                i->audioset = 0;

Review

Quoted 13 lines

last successful one was 2.6.14-rc5.

I've noticed that there is a v4l-info command, which dumps v4l2 information, and it seems to signify that v4l2 is giving a different answer.

The following is a diff, which seems to signify that this difference exists in the two versions:

(quoted diff) +1 -1
-	audioset                : 1
+	audioset                : 0

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project
#23 lore raw

Re: [x86_64] bttv: linux 2.6.16-rc1 mplayer fails to record ALSA audio and fails tune TV.

Quoted 9 lines · Junichi Uekawa

Hi,

status update, it's still like this; I probably don't have much time to sit around debugging this problem myself, but if anyone else has met this problem and fixed it, I'd be delighted to know about it.

Linux dancer64 2.6.16-rc1dancer-ga6df590d-dirty #1 Wed Feb 1 18:36:00 JST 2006 x86_64 GNU/Linux

Are you referring to bugzilla 5895 ? I just closed that ticket.

http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=dc3ce5a86001;style=gitweb

Manu

#24 lore raw

Re: [x86_64] bttv: linux 2.6.16-rc1 mplayer fails to record ALSA audio and fails tune TV.

Hi,

Quoted 7 lines
Quoted 6 lines · Junichi Uekawa

Hi,

status update, it's still like this; I probably don't have much time to sit around debugging this problem myself, but if anyone else has met this problem and fixed it, I'd be delighted to know about it.

Quoted 7 lines
Quoted 3 lines

Linux dancer64 2.6.16-rc1dancer-ga6df590d-dirty #1 Wed Feb 1 18:36:00 JST 2006 x86_64 GNU/Linux

Are you referring to bugzilla 5895 ? I just closed that ticket.

http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=dc3ce5a86001;style=gitweb

That sounds like a different module; I'm using 'bttv' module.

I've tried

rmmod bttv
rmmod tuner
rmmod compat_ioctl32
rmmod v4l2-common
rmmod tveeprom
rmmod videodev
rmmod ir-common

insmod v4l2-common.ko
insmod tveeprom.ko
insmod videodev.ko
insmod compat_ioctl32.ko
insmod tuner.ko
insmod ir-common.ko
insmod bttv.ko

on

$ hg log|head
changeset:   3295:02699cfc26d5
tag:         tip
user:        Manu Abraham <[email protected]>
date:        Thu Feb  2 07:59:47 2006 +0400
summary:     bugfix [5895], return an error value

and I can reproduce the situation.

The current situation being that no images come through mencoder, which probably means it's not
1. tuning the tuner (If there has been a i2c breakage, sounds possible)
2. getting the images
or both.

I am able to see TV through xawtv, and I am assuming that means it's working with v4l1 compatibility layer of some sort.

regards,
junichi

Signature · 1 line
dancer@{debian.org,netfort.gr.jp}   Debian Project