Skip to contentSkip to conversation

usb: Novation Twitch not working on Linux 4.7

DISCUSSION Juan Pedro Bolívar Puente 2 participants 3 messages Sep 21, 2016

lore
Share & tools
lore
#0 lore raw

Hi!

I am trying to use again my Novation Twitch after some time, and audio playback is not working anymore. I have tried with Jackd and various other programs, and it seems to always fail to install the hardware params. Note that before it fails, I do get to hear a little noise in the monitor output. Here is console the output of various programs.

Note that, I am using Linux 4.7.0-1-amd64 as distributed with Debian Sid.

Here is the output of some commands:

  $ ./alsacap

*** Scanning for playback devices ***
...
Card 1, ID Twitch', name Twitch'
Device 0, ID USB Audio', name USB Audio', 1 subdevices (1 available)
4 channels, sampling rate 44100..48000 Hz
Sample formats: S24_3LE
Subdevice 0, name `subdevice #0'

  $ ./alsacap -d hw:Twitch

*** Exploring configuration space of device `hw:Twitch' for playback *** 4 channels
Sampling rate 44100..48000 Hz
Sample formats: S24_3LE
Significant bits: 24

  $ aplay -D hw:Twitch -f S24_3LE -c 4 -r 44100 test.wav
      Playing raw data 'prueba.wav' : Signed 24 bit Little Endian in
      3bytes, Rate 44100 Hz, Channels 4
      aplay: set_params:1361: Unable to install hw params:
      ACCESS:  RW_INTERLEAVED
      FORMAT:  S24_3LE
      SUBFORMAT:  STD
      SAMPLE_BITS: 24
      FRAME_BITS: 96
      CHANNELS: 4
      RATE: 44100
      PERIOD_TIME: (125011 125012)
      PERIOD_SIZE: 5513
      PERIOD_BYTES: 66156
      PERIODS: (3 4)
      BUFFER_TIME: 500000
      BUFFER_SIZE: 22050
      BUFFER_BYTES: 264600
      TICK_TIME: 0
  $ mplayer -ao alsa:device=hw=Twitch test.mp3

MPlayer 1.3.0 (Debian), built with gcc-5.4.0 (C) 2000-2016 MPlayer Team Playing test.mp3.
...
[AO_ALSA] Format s16le is not supported by hardware, trying default. [AO_ALSA] Unable to set format: Invalid argument
Failed to initialize audio driver 'alsa:device=hw=Twitch'

  $ mplayer -ao alsa:device=plughw=Twitch test.mp3
      MPlayer 1.3.0 (Debian), built with gcc-5.4.0 (C) 2000-2016 MPlayer Team
      Playing test.mp3.
      ...
      [AO_ALSA] alsa-lib: pcm_hw.c:603:(snd_pcm_hw_prepare)
  SNDRV_PCM_IOCTL_PREPARE failed (-32): Broken pipe
      [AO_ALSA] alsa-lib: pcm_direct.c:1054:(snd1_pcm_direct_initialize_slave)
  unable to install hw params
      [AO_ALSA] alsa-lib: pcm_dmix.c:1053:(snd_pcm_dmix_open) unable to

initialize slave
[AO_ALSA] Playback open error: Broken pipe Failed to initialize audio driver 'alsa:device=hw=Twitch'

  $ jackd -n twitch -d alsa -d hw:Twitch
      jackdmp 1.9.11
      ...
      creating alsa driver ...
  hw:Twitch|hw:Twitch|1024|2|48000|0|0|nomon|swmeter|-|32bit
      Using ALSA driver USB-Audio running on card 1 - Novation Twitch at
  usb-0000:00:1d.0-1.2, full speed
      ALSA: Cannot open PCM device alsa_pcm for capture. Falling back to
  playback-only mode
      configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2

periods
ALSA: final selected sample format for playback: 24bit little-endian in
3bytes format
ALSA: use 2 periods for playback
ALSA: cannot set hardware parameters for playback
ALSA: cannot configure playback channel

Am I doing something wrong? Is it really broken?

Thanks a lot!

JP

--
∿∿∿∿
https://sinusoid.es
∿∿∿∿

#1 lore raw
Quoted 4 lines · Juan Pedro Bolívar Puente
  $ aplay -D hw:Twitch -f S24_3LE -c 4 -r 44100 test.wav

Playing raw data 'prueba.wav' : Signed 24 bit Little Endian in 3bytes, Rate 44100 Hz, Channels 4
aplay: set_params:1361: Unable to install hw params:

Any error message in the system log?

Regards,
Clemens

#2 lore raw
Quoted 7 lines · Clemens Ladisch
Quoted 4 lines · Juan Pedro Bolívar Puente
  $ aplay -D hw:Twitch -f S24_3LE -c 4 -r 44100 test.wav

Playing raw data 'prueba.wav' : Signed 24 bit Little Endian in 3bytes, Rate 44100 Hz, Channels 4
aplay: set_params:1361: Unable to install hw params:

Any error message in the system log?

Hmmm, today, the weirdest thing happened. It worked! For a while... It worked with aplay, mplayer and jackd. Then I tried with Mixxx (with ALSA output) and it got "broken". I reboot: it works again. I even get it to work on Mixxx. But then I press "query devices" on Mixxx and it gets "broken" again. I reboot to try to see if I can make the sequence
reproducible: it does not work anymore. I reboot: again and again and again and it does not work.

When I say "it does not work" the symptons are exactly the same as I said before. Additionally, I just tried looking at dmesg, and I see lots of this:

    [ 116.551873] usb 2-1.2: cannot submit urb 0, error -28: not enough
    bandwidth

Lol, one last funny thing. I just tried again as I was writing this
Email: now it is working with all programs. Oh, no! I press "Query devices" on Mixxx and it gets broken again.

I look at the logs for a while, nothing new.

Oh, now it works again! This is driving me crazy...

Thanks anyways for the responses :-)

JP

Signature · 3 lines
                                 ∿∿∿∿
                         https://sinusoid.es
                                 ∿∿∿∿