ATA over Ethernet driver for 2.6.9 (with changes)

diff -urNp linux-2.6.9/Documentation/aoe/aoe.txt linux-2.6.9-aoe/Documentation/aoe/aoe.txt
@@ -0,0 +1,59 @@
+The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
+
+  http://www.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html
+
+  It has many tips and hints!
+
+CREATING DEVICE NODES
+
+  Users of udev should find device nodes created automatically.  Two
+  scripts are provided in Documentation/aoe as examples of static
+  device node creation for using the aoe driver.
+
+    rm -rf /dev/etherd
+    sh Documentation/aoe/mkdevs /dev/etherd
+
+  ... or to make just one shelf's worth of block device nodes ...
+
+    sh Documentation/aoe/mkshelf /dev/etherd 0
+
+  There is also an autoload script that shows how to edit
+  /etc/modprobe.conf to ensure that the aoe module is loaded when
+  necessary.
+
+USING DEVICE NODES
+
+  "cat /dev/etherd/stat" shows the status of discovered AoE devices on
+  your LAN:
+
+	root@nai root# cat /dev/etherd/stat
+	/dev/etherd/e15.3       eth0    up
+	/dev/etherd/e6.2        eth3    up
+	/dev/etherd/e6.4        eth3    up
+	/dev/etherd/e6.3        eth3    up
+	/dev/etherd/e6.9        eth3    up
+	/dev/etherd/e6.5        eth3    up
+	/dev/etherd/e6.7        eth3    up
+	/dev/etherd/e6.6        eth3    up
+	/dev/etherd/e6.8        eth3    up
+	/dev/etherd/e6.0        eth3    up
+	/dev/etherd/e6.1        eth3    up
+
+  "cat /dev/etherd/err" blocks, waiting for error diagnostic output,
+  like any retransmitted packets.
+
+  "echo interfaces eth2 eth4 > /dev/etherd/ctl" tells the aoe driver
+  to limit ATA over Ethernet traffic to eth2 and eth4.  AoE traffic
+  from untrusted networks should be ignored as a matter of security.
+
+  "echo discover > /dev/etherd/ctl" tells the driver to find out what
+  AoE devices are available.
+
+  The block devices are named like this:
+
+	e{shelf}.{slot}
+	e{shelf}.{slot}p{part}
+
+  ... so that "e0.2" is the third blade from the left (slot 2) in the
+  first shelf (shelf address zero).  That's the whole disk.  The first
+  partition on that disk would be "e0.2p1".

diff -urNp linux-2.6.9/Documentation/aoe/autoload linux-2.6.9-aoe/Documentation/aoe/autoload
@@ -0,0 +1,17 @@
+#!/bin/sh
+# set aoe to autoload by installing the
+# aliases in /etc/modprobe.conf
+
+f=/etc/modprobe.conf
+
+if test ! -r $f || test ! -w $f; then
+	echo "cannot configure $f for module autoloading" 1>&2
+	exit 1
+fi
+
+grep major-152 $f >/dev/null
+if [ $? = 1 ]; then
+	echo alias block-major-152 aoe >> $f
+	echo alias char-major-152 aoe >> $f
+fi
+

diff -urNp linux-2.6.9/Documentation/aoe/mkdevs linux-2.6.9-aoe/Documentation/aoe/mkdevs
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+n_shelves=10
+
+if test "$#" != "1"; then
+	echo "Usage: mkdevs {dir}" 1>&2
+	exit 1
+fi
+dir=$1
+
+MAJOR=152
+
+echo "Creating AoE devnode files in $dir ..."
+
+set -e
+
+mkdir -p $dir
+
+rm -f $dir/ctl
+mknod -m 0200 $dir/ctl c $MAJOR 0
+rm -f $dir/stat
+mknod -m 0400 $dir/stat c $MAJOR 1
+rm -f $dir/err
+mknod -m 0400 $dir/err c $MAJOR 2
+
+i=0
+while test $i -lt $n_shelves; do
+	sh -xc "`dirname $0`/mkshelf $dir $i"
+	i=`expr $i + 1`
+done

diff -urNp linux-2.6.9/Documentation/aoe/mkshelf linux-2.6.9-aoe/Documentation/aoe/mkshelf
@@ -0,0 +1,23 @@
+#! /bin/sh
+
+if test "$#" != "2"; then
+	echo "Usage: mkshelf {dir} {shelfaddress}" 1>&2
+	exit 1
+fi
+dir=$1
+shelf=$2
+MAJOR=152
+
+set -e
+
+minor=`echo 10 \* $shelf \* 16 | bc`
+for slot in `seq 0 9`; do
+	for part in `seq 0 15`; do
+		name=e$shelf.$slot
+		test "$part" != "0" && name=${name}p$part
+		rm -f $dir/$name
+		mknod -m 0660 $dir/$name b $MAJOR $minor
+
+		minor=`expr $minor + 1`
+	done
+done

diff -urNp linux-2.6.9/MAINTAINERS linux-2.6.9-aoe/MAINTAINERS
@@ -329,6 +329,12 @@ L:	[email protected]
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
 
+ATA OVER ETHERNET DRIVER
+P:	Ed L. Cashin
+M:	[email protected]
+W:	http://www.coraid.com/support/linux
+S:	Supported
+
 ATMEL WIRELESS DRIVER
 P:	Simon Kelley
 M:	[email protected]

diff -urNp linux-2.6.9/drivers/Makefile linux-2.6.9-aoe/drivers/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_DIO)		+= dio/
 obj-$(CONFIG_SBUS)		+= sbus/
 obj-$(CONFIG_ZORRO)		+= zorro/
 obj-$(CONFIG_MAC)		+= macintosh/
+obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_USB)		+= usb/

diff -urNp linux-2.6.9/drivers/block/Kconfig linux-2.6.9-aoe/drivers/block/Kconfig
@@ -358,4 +358,12 @@ config LBD
 
 source "drivers/s390/block/Kconfig"
 
+config ATA_OVER_ETH
+	tristate "ATA over Ethernet support"
+	depends on NET
+	default m
+	help
+	This driver provides Support for ATA over Ethernet block
+	devices like the Coraid EtherDrive (R) Storage Blade.
+
 endmenu

diff -urNp linux-2.6.9/drivers/block/aoe/Makefile linux-2.6.9-aoe/drivers/block/aoe/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for ATA over Ethernet
+#
+
+obj-$(CONFIG_ATA_OVER_ETH)	+= aoe.o
+aoe-objs := aoeblk.o aoechr.o aoecmd.o aoedev.o aoemain.o aoenet.o