No audio output via built-in speaker on a MacMini while headphone jack is plugged in
amixer set Speaker unmute' makes no difference physically unplugging the headphone jack from the socket does, i.e. amixer set Speaker (un)mute' does the right thing.
Signature · 1 line
mailto:[email protected]
Quoted 7 lines · On Mon, 14 Mar 2016 09:11:10 +0100, [email protected] wrote:
[1 Output of
alsa-info.sh<application/octet-stream (base64)>]
amixer set Speaker unmute' makes no difference physically unplugging the headphone jack from the socket does, i.e.amixer set Speaker (un)mute' does the right thing.
Could you give more details? The description is too concise and vague.
The auto-mute feature is standard behavior. When "Auto-Mute Mode" control is set to "Enabled", the speaker is muted no matter what you set the speaker mute switch. If this isn't the case, please elaborate what you expected and what doesn't work.
thanks,
Takashi
Quoted 6 lines · Takashi Iwai
Quoted 4 lines · On Mon, 14 Mar 2016 09:11:10 +0100, [email protected] wrote:
[1 Output of
alsa-info.sh<application/octet-stream (base64)>]
Quoted 7 lines
Quoted 3 lines
amixer set Speaker unmute' makes no difference physically unplugging the headphone jack from the socket does, i.e.amixer set Speaker (un)mute' does the right thing.Could you give more details? The description is too concise and vague.
I have a script to toggles sound emission by the built-in speaker:
#!/bin/sh
amixer get Speaker | grep -q "\[on\]" && onoff="mute" || onoff="unmute" amixer set Speaker $onoff
echo "$onoff"
As we speak:
`--> atoggle
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
unmute
This setting is ignored when (i.e. speaker is always silent) if the headphone jack is plugged in.
This used to work in prior kernels, I believe I've shared my bisection results with you in one of the earlier (personal) e-mails, if there's a better way to achieve the desired result (i.e. control sound emission by the speaker regardless of the headphone jack plug-status) I'll happily use that instead.
Quoted 9 lines
The auto-mute feature is standard behavior. When "Auto-Mute Mode" control is set to "Enabled", the speaker is muted no matter what you set the speaker mute switch. If this isn't the case, please elaborate what you expected and what doesn't work.
thanks,
Takashi
Signature · 1 line
mailto:[email protected]
Quoted 36 lines · On Mon, 14 Mar 2016 18:16:11 +0100, [email protected] wrote:
Quoted 6 lines · Takashi Iwai
Quoted 4 lines · On Mon, 14 Mar 2016 09:11:10 +0100, [email protected] wrote:
[1 Output of
alsa-info.sh<application/octet-stream (base64)>]Quoted 7 lines
Quoted 3 lines
amixer set Speaker unmute' makes no difference physically unplugging the headphone jack from the socket does, i.e.amixer set Speaker (un)mute' does the right thing.Could you give more details? The description is too concise and vague.
I have a script to toggles sound emission by the built-in speaker:
#!/bin/sh
amixer get Speaker | grep -q "\[on\]" && onoff="mute" || onoff="unmute" amixer set Speaker $onoff
echo "$onoff"As we speak:
`--> atoggle
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
unmute
Quoted 8 lines
This setting is ignored when (i.e. speaker is always silent) if the headphone jack is plugged in.
This used to work in prior kernels, I believe I've shared my bisection results with you in one of the earlier (personal) e-mails, if there's a better way to achieve the desired result (i.e. control sound emission by the speaker regardless of the headphone jack plug-status) I'll happily use that instead.
As mentioned, make sure that you disable auto-mute mode:
amixer set "Auto-Mute Mode" "Disabled"
If you still have no speaker output even after that, give alsa-info.sh output with non-working state, and also the alsa-info.sh output from the working state on the earlier kernel.
Takashi
Quoted 47 lines · Takashi Iwai
Quoted 36 lines · On Mon, 14 Mar 2016 18:16:11 +0100, [email protected] wrote:
Quoted 6 lines · Takashi Iwai
Quoted 4 lines · On Mon, 14 Mar 2016 09:11:10 +0100, [email protected] wrote:
[1 Output of
alsa-info.sh<application/octet-stream (base64)>]Quoted 7 lines
Quoted 3 lines
amixer set Speaker unmute' makes no difference physically unplugging the headphone jack from the socket does, i.e.amixer set Speaker (un)mute' does the right thing.Could you give more details? The description is too concise and vague.
I have a script to toggles sound emission by the built-in speaker:
#!/bin/sh
amixer get Speaker | grep -q "\[on\]" && onoff="mute" || onoff="unmute" amixer set Speaker $onoff
echo "$onoff"As we speak:
`--> atoggle
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
unmuteQuoted 8 lines
This setting is ignored when (i.e. speaker is always silent) if the headphone jack is plugged in.
This used to work in prior kernels, I believe I've shared my bisection results with you in one of the earlier (personal) e-mails, if there's a better way to achieve the desired result (i.e. control sound emission by the speaker regardless of the headphone jack plug-status) I'll happily use that instead.
Quoted 8 lines
As mentioned, make sure that you disable auto-mute mode:
amixer set "Auto-Mute Mode" "Disabled"If you still have no speaker output even after that, give
alsa-info.shoutput with non-working state, and also thealsa-info.shoutput from the working state on the earlier kernel.
jack | speaker | auto-mute | spaker emits sound 000 unplugged | muted | disabled | no 001 unplugged | muted | enabled | no 010 unplugged | unmuted | disabled | yes 011 unplugged | unmuted | enabled | yes 100 plugged | muted | disabled | no 101 plugged | muted | enabled | no 110 plugged | unmuted | disabled | no 111 plugged | unmuted | enabled | no
alsa-info outputs can be found in the attached archive
Signature · 2 lines
-- mailto:[email protected]
Quoted 2 lines · Takashi Iwai
On Mon, 14 Mar 2016 18:16:11 +0100,
[email protected] wrote:
[..snip..]
Quoted 7 lines
As mentioned, make sure that you disable auto-mute mode:
amixer set "Auto-Mute Mode" "Disabled"If you still have no speaker output even after that, give
alsa-info.shoutput with non-working state, and also thealsa-info.shoutput from the working state on the earlier kernel.
I would like to avoid checking out and building the earlier kernel if at all possible, will do it if there's no other way forward...
Signature · 1 line
mailto:[email protected]
Quoted 68 lines · On Mon, 14 Mar 2016 19:39:26 +0100, [email protected] wrote:
Quoted 47 lines · Takashi Iwai
Quoted 36 lines · On Mon, 14 Mar 2016 18:16:11 +0100, [email protected] wrote:
Quoted 6 lines · Takashi Iwai
Quoted 4 lines · On Mon, 14 Mar 2016 09:11:10 +0100, [email protected] wrote:
[1 Output of
alsa-info.sh<application/octet-stream (base64)>]Quoted 7 lines
Quoted 3 lines
amixer set Speaker unmute' makes no difference physically unplugging the headphone jack from the socket does, i.e.amixer set Speaker (un)mute' does the right thing.Could you give more details? The description is too concise and vague.
I have a script to toggles sound emission by the built-in speaker:
#!/bin/sh
amixer get Speaker | grep -q "\[on\]" && onoff="mute" || onoff="unmute" amixer set Speaker $onoff
echo "$onoff"As we speak:
`--> atoggle
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 127
Mono:
Front Left: Playback 127 [100%] [0.00dB] [on]
Front Right: Playback 127 [100%] [0.00dB] [on]
unmuteQuoted 8 lines
This setting is ignored when (i.e. speaker is always silent) if the headphone jack is plugged in.
This used to work in prior kernels, I believe I've shared my bisection results with you in one of the earlier (personal) e-mails, if there's a better way to achieve the desired result (i.e. control sound emission by the speaker regardless of the headphone jack plug-status) I'll happily use that instead.
Quoted 8 lines
As mentioned, make sure that you disable auto-mute mode:
amixer set "Auto-Mute Mode" "Disabled"If you still have no speaker output even after that, give
alsa-info.shoutput with non-working state, and also thealsa-info.shoutput from the working state on the earlier kernel.jack | speaker | auto-mute | spaker emits sound 000 unplugged | muted | disabled | no 001 unplugged | muted | enabled | no 010 unplugged | unmuted | disabled | yes 011 unplugged | unmuted | enabled | yes 100 plugged | muted | disabled | no 101 plugged | muted | enabled | no 110 plugged | unmuted | disabled | no 111 plugged | unmuted | enabled | no
Quoted 1 line
alsa-info outputs can be found in the attached archive
Thanks. This seems to be the missing GPIO setup when the auto-mute is disabled. Could you give the patch below?
Takashi
---
sound/pci/hda/patch_cirrus.c +6 -2
@@ -174,8 +174,12 @@ static void cs_automute(struct hda_codec *codec)snd_hda_gen_update_outputs (codec);if (spec->gpio_eapd_hp || spec->gpio_eapd_speaker) { - spec->gpio_data = spec->gen.hp_jack_present ? - spec->gpio_eapd_hp : spec->gpio_eapd_speaker; +if (spec->gen.automute_speaker) + spec->gpio_data = spec->gen.hp_jack_present ? + spec->gpio_eapd_hp : spec->gpio_eapd_speaker; +else + spec->gpio_data = + spec->gpio_eapd_hp | spec->gpio_eapd_speaker;snd_hda_codec_write (codec,0x01 ,0 ,AC_VERB_SET_GPIO_DATA , spec->gpio_data); }
[email protected]
Tested-byQuoted 3 lines · Takashi Iwai
Quoted 1 line · On Mon, 14 Mar 2016 19:39:26 +0100, [email protected] wrote:
[..snip..]
Quoted 17 lines
Thanks. This seems to be the missing GPIO setup when the auto-mute is disabled. Could you give the patch below?
Takashi
---
sound/pci/hda/patch_cirrus.c +0
-1@@ -174,8 +174,12 @@ static void cs_automute(struct hda_codec *codec)snd_hda_gen_update_outputs (codec);if (spec->gpio_eapd_hp || spec->gpio_eapd_speaker) { - spec->gpio_data = spec->gen.hp_jack_present ?
sound/pci/hda/patch_cirrus.c static void cs_automute(struct hda_codec *codec) · line 185
Quoted 10 lines
sound/pci/hda/patch_cirrus.c +6
-1- spec->gpio_eapd_hp : spec->gpio_eapd_speaker; +if (spec->gen.automute_speaker) + spec->gpio_data = spec->gen.hp_jack_present ? + spec->gpio_eapd_hp : spec->gpio_eapd_speaker; +else + spec->gpio_data = + spec->gpio_eapd_hp | spec->gpio_eapd_speaker;snd_hda_codec_write (codec,0x01 ,0 ,AC_VERB_SET_GPIO_DATA , spec->gpio_data); }
That works perfectly with "Auto-Mute Mode" set to "Disabled".
Danke schön.
If you need one.
Signature · 5 lines
mailto:[email protected] _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 39 lines · On Tue, 15 Mar 2016 16:43:58 +0100, [email protected] wrote:
Quoted 3 lines · Takashi Iwai
Quoted 1 line · On Mon, 14 Mar 2016 19:39:26 +0100, [email protected] wrote:
[..snip..]
Quoted 17 lines
Thanks. This seems to be the missing GPIO setup when the auto-mute is disabled. Could you give the patch below?
Takashi
---
sound/pci/hda/patch_cirrus.c +0
-1@@ -174,8 +174,12 @@ static void cs_automute(struct hda_codec *codec)snd_hda_gen_update_outputs (codec);if (spec->gpio_eapd_hp || spec->gpio_eapd_speaker) { - spec->gpio_data = spec->gen.hp_jack_present ?sound/pci/hda/patch_cirrus.c static void cs_automute(struct hda_codec *codec) · line 185
Quoted 10 lines
sound/pci/hda/patch_cirrus.c +6
-1- spec->gpio_eapd_hp : spec->gpio_eapd_speaker; +if (spec->gen.automute_speaker) + spec->gpio_data = spec->gen.hp_jack_present ? + spec->gpio_eapd_hp : spec->gpio_eapd_speaker; +else + spec->gpio_data = + spec->gpio_eapd_hp | spec->gpio_eapd_speaker;snd_hda_codec_write (codec,0x01 ,0 ,AC_VERB_SET_GPIO_DATA , spec->gpio_data); }That works perfectly with "Auto-Mute Mode" set to "Disabled".
Quoted 5 lines
Danke schön.
Tested-by [email protected]If you need one.
Good to hear. I'll cook up the official patch and submit/merge soon later. Thanks for your quick test.
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel