PM branch updates
FYI... this small set of updates has been pushed to the pm branch[1]. This will be the last round of updates before the rebase to 2.6.30.
Aaro Koskinen (1):
OMAP3: PM: Save and restore I2C wakeup sources
Kevin Hilman (1):
OMAP3: PM: set MUSB OTG into force-idle at boot
Phil Carmody (2):
OMAP3: PM: Don't do unnecessary searches in omap_sr_vdd*_autocomp_store
OMAP3: PM: Early exit on invalid parameters
Rajendra Nayak (1):
OMAP3: SR: Fix SR driver to check for omap-pm return values
Russ Dill (1):
Allow OMAP3 GPIO wakeup from power off.
[1] See branch named 'pm' in this tree:
http://git.kernel.org/?p=linux/kernel/git/khilman/linux-omap-pm.git;a=summary
Quoted 2 lines · Kevin Hilman
FYI... this small set of updates has been pushed to the pm branch[1]. This will be the last round of updates before the rebase to 2.6.30.
Oops, shortlog was missing the two patches from Kalle. Heres' the right log:
Aaro Koskinen (1):
OMAP3: PM: Save and restore I2C wakeup sources
Kalle Jokiniemi (2):
ARM: OMAP3: Add missing iva2 clken_pll save/restore
ARM: OMAP: Add missing SMS_SYSCONFIG save/restore
Kevin Hilman (1):
OMAP3: PM: set MUSB OTG into force-idle at boot
Phil Carmody (2):
OMAP3: PM: Don't do unnecessary searches in omap_sr_vdd*_autocomp_store
OMAP3: PM: Early exit on invalid parameters
Rajendra Nayak (1):
OMAP3: SR: Fix SR driver to check for omap-pm return values
Russ Dill (1):
Allow OMAP3 GPIO wakeup from power off.
Quoted 2 lines · Elvis Dowson
When you say rebase to 2.6.30, where would I get this updated kernel branch from? Can you tell me the git repository location, please?
When I rebase the PM branch, it will still be called 'pm' and will be remain in my linux-omap-pm git tree[1].
The current 2.6.29-based pm branch will be renamed pm-2.6.29 for those wanting to keep using a 2.6.29-based version.
Kevin
[1] http://git.kernel.org/?p=linux/kernel/git/khilman/linux-omap-pm.git;a=summary
Quoted 7 lines · Elvis Dowson
Hi Kevin,
Thanks for the reply. I am working with the
gumstix overo TI OMAP 3503, and just finished porting android-2.6.29 to this platform. Towards the end I noticed that there was no power management available for the OMAP !! And I used the same git repository, pulled nearly all the PM patches, except the SR ones, which didn't work.
It's still not terribly clear to me what PM patches you are or aren't
using. Or what exactly you mean by "didn't work."
Until today, there was a bug in the SR series in that you also had to have the OMAP_PM_SRF enabled. That was fixed by Rajendra and pushed into today's PM branch. The alternative was to just disable SmartReflex.
I don't currently have any Gumstix hardware (hint, hint) but if I did, I could add it to the platforms where I validate the PM branch.
Kevin
Quoted 16 lines · Kevin Hilman
Quoted 15 lines
Quoted 2 lines · Elvis Dowson
When you say rebase to 2.6.30, where would I get this updated kernel branch from? Can you tell me the git repository location, please?
When I rebase the PM branch, it will still be called 'pm' and will be remain in my linux-omap-pm git tree[1].
The current 2.6.29-based pm branch will be renamed pm-2.6.29 for those wanting to keep using a 2.6.29-based version.
Kevin
[1] http://git.kernel.org/?p=linux/kernel/git/khilman/linux-omap-pm.git;a=summary
Elvis,
Quoted 3 lines · Elvis Dowson
Hi Kevin,
Thanks for the reply. I am working with the gumstix overo
TI OMAP 3503, and just finished porting android-2.6.29 to this platform. Towards the end I noticed that there was no power management available for the OMAP !! And I used the same git repository, pulled nearly all the PM patches, except the SR ones, which didn't work.
FYI, there is Google's android-2.6.29 omap git tree available at http://android.git.kernel.org/?p=kernel/omap.git;a=shortlog;h=refs/heads/android-omap-2.6.29
which has pretty much all (except recent changes) patches from PM branch integrated.
Eugeny
Quoted 26 lines
Elvis Dowson
Quoted 15 lines · Kevin Hilman
Quoted 2 lines · Elvis Dowson
When you say rebase to 2.6.30, where would I get this updated kernel branch from? Can you tell me the git repository location, please?
When I rebase the PM branch, it will still be called 'pm' and will be remain in my linux-omap-pm git tree[1].
The current 2.6.29-based pm branch will be renamed pm-2.6.29 for those wanting to keep using a 2.6.29-based version.
Kevin
[1] http://git.kernel.org/?p=linux/kernel/git/khilman/linux-omap-pm.git;a=summary
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html