Skip to contentSkip to conversation

how do you rate limit routable traffic without rate limiting

LARTC Nuutti Kotivuori 1 participant 1 message Mar 2, 2004

lore
Share & tools
lore
#0 lore raw
Quoted 3 lines · Michael A. D'Annunzio

I know if I remove the default parameter, traffic not matching any filter is sent over the root queue, but I need to have a defined default.

Define the default for whatever you wish to have as the default class for non-ip traffic and then filter _all_ ip traffic into a certain class, eg:

  tc filter add dev $DEV parent 1: protocol ip prio 18 u32 \
     match ip dst 0.0.0.0/0 flowid 1:20

Or, even more modularily, use the MARK target at the end of your iptables ruleset after all other markings:

  iptables -t mangle -A POST_ROUTING -m mark --mark 0 -j MARK --set-mark 3
  iptables -t mangle -A OUTPUT -m mark --mark 0 -j MARK --set-mark 3

And then just setup your tc to match the marks to classes:

  tc filter add dev $DEV parent 1: protocol ip prio 10 \
      handle 3 fw \
      flowid 1:30

Or a variety of other solutions.

I am not sure if this will solve your problem exactly, though - since having problems with ARP traffic and so seems really odd.

-- Naked

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/