2.6.16-rc4 git, ALSA USB-MIDI does not give NOTEOFF event for M-Audio Keystation 88es, but NOTEON with velocity=0
Hi,
I'm seeing that USB MIDI keyboard (M-Audio Keystation 88es) is generating note-on events on both note-on and note-off. The difference being that note-off is generating an note-on event with velocity '0'.
The following code in seq_midi_emul.c(snd_midi_process_event) looks suspiciously like what's needed for this device:
/* Make sure that we don't have a note on that should really be
* a note off */
if (ev->type == SNDRV_SEQ_EVENT_NOTEON && ev->data.note.velocity == 0)
ev->type = SNDRV_SEQ_EVENT_NOTEOFF;I'm not sure if this is something hardware-specific or not.
$ uname -a Linux dancer64 2.6.16-rc4dancer-g9e956c2d-dirty #1 Thu Feb 23 22:06:47 JST 2006 x86_64 GNU/Linux
$ ./seqdump.c # this program is attached the end of the mail. noteon 0 3c 4e noteon 0 3c 0 noteon 0 3e 4d noteon 0 3e 0 noteon 0 40 54 noteon 0 40 0 noteon 0 41 4f noteon 0 41 0 noteon 0 45 4c noteon 0 45 0 noteon 0 43 4f noteon 0 43 0 noteon 0 41 56 noteon 0 41 0 noteon 0 40 4f noteon 0 40 0 noteon 0 3e 4c noteon 0 3e 0
$ lsusb -s3:7 -v
Bus 003 Device 007: ID 0763:0192 Midiman
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0763 Midiman idProduct 0x0192 bcdDevice 1.25 iManufacturer 1 M-Audio iProduct 2 USB Keystation 88es iSerial 0 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 101
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 3 Audio Class
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 9
bInCollection 1
baInterfaceNr( 0) 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 1 Audio
bInterfaceSubClass 3 MIDI Streaming
bInterfaceProtocol 0
iInterface 0
MIDIStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 65
MIDIStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 2 (MIDI_IN_JACK)
bJackType 1 Embedded
bJackID 1
iJack 0
MIDIStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 2 (MIDI_IN_JACK)
bJackType 2 External
bJackID 2
iJack 0
MIDIStreaming Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (MIDI_OUT_JACK)
bJackType 1 Embedded
bJackID 3
bNrInputPins 1
baSourceID( 0) 2
BaSourcePin( 0) 1
iJack 0
MIDIStreaming Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (MIDI_OUT_JACK)
bJackType 2 External
bJackID 4
bNrInputPins 1
baSourceID( 0) 1
BaSourcePin( 0) 1
iJack 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
bRefresh 0
bSynchAddress 0
MIDIStreaming Endpoint Descriptor:
bLength 5
bDescriptorType 37
bDescriptorSubtype 1 (GENERAL)
bNumEmbMIDIJack 1
baAssocJackID( 0) 3
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
bRefresh 0
bSynchAddress 0
MIDIStreaming Endpoint Descriptor:
bLength 5
bDescriptorType 37
bDescriptorSubtype 1 (GENERAL)
bNumEmbMIDIJack 1
baAssocJackID( 0) 1
Device Status: 0x0000
(Bus Powered)
$ lsmod Module Size Used by snd_usb_audio 89280 0 snd_usb_lib 17856 1 snd_usb_audio snd_hwdep 11720 1 snd_usb_audio snd_seq_dummy 4484 0 snd_seq_oss 36260 0 snd_seq_midi 9920 0 snd_rawmidi 28768 2 snd_usb_lib,snd_seq_midi snd_seq_midi_event 8384 2 snd_seq_oss,snd_seq_midi snd_seq 56600 9 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_seq_device 10320 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq ipt_recent 11736 2 ip_nat_irc 3200 0 ip_nat_ftp 4352 0 ip_conntrack_irc 7840 1 ip_nat_irc ip_conntrack_ftp 8872 1 ip_nat_ftp xt_state 2560 3 ipt_MASQUERADE 3904 1 ipt_LOG 7296 7 iptable_mangle 3392 0 ipt_TCPMSS 4800 0 xt_tcpmss 3072 0 xt_tcpudp 3968 2 iptable_filter 3584 1 iptable_nat 9412 1 ip_nat 19576 4 ip_nat_irc,ip_nat_ftp,ipt_MASQUERADE,iptable_nat ip_tables 13728 3 iptable_mangle,iptable_filter,iptable_nat ip_conntrack 55368 8 ip_nat_irc,ip_nat_ftp,ip_conntrack_irc,ip_conntrack_ftp,xt_state,ipt_MASQUERADE,iptable_nat,ip_nat x_tables 15176 9 ipt_recent,xt_state,ipt_MASQUERADE,ipt_LOG,ipt_TCPMSS,xt_tcpmss,xt_tcpudp,iptable_nat,ip_tables pppoe 15936 2 pppox 4432 1 pppoe af_packet 23756 4 tsdev 9280 0 pcspkr 3848 0 tuner 57644 0 bttv 207164 0 video_buf 25156 1 bttv compat_ioctl32 9856 1 bttv v4l2_common 9984 3 tuner,bttv,compat_ioctl32 btcx_risc 5768 1 bttv ir_common 11076 1 bttv tveeprom 18064 1 bttv videodev 12096 1 bttv snd_atiixp 21592 0 snd_ac97_codec 108668 1 snd_atiixp snd_ac97_bus 2944 1 snd_ac97_codec snd_pcm_oss 57056 0 snd_mixer_oss 19328 1 snd_pcm_oss snd_pcm 98060 4 snd_usb_audio,snd_atiixp,snd_ac97_codec,snd_pcm_oss snd_timer 25736 2 snd_seq,snd_pcm snd 64384 15 snd_usb_audio,snd_usb_lib,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_seq_device,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer snd_page_alloc 12240 2 snd_atiixp,snd_pcm generic 5764 0 [permanent] shpchp 49216 0 pci_hotplug 12548 1 shpchp ide_scsi 18244 0 psmouse 42376 0 rtc 14392 0 unix 31096 419
regards,
junichi
Signature · 59 lines
dancer@{debian.org,netfort.gr.jp} Debian Project
===File ~/cvscheckout/whole/danceraudiotools/seqmidi/seqdump.c===
/*BINFMTC: -lasound
Connects to ALSA sequencer port and dumps NOTE ON and NOTE OFF events.
*/
#include <stdio.h>
#include <alsa/asoundlib.h>
int main(int argc, char **argv)
{
snd_seq_t *seq;
int err;
int port;
snd_seq_event_t *ev;
err=snd_seq_open(&seq, "default", SND_SEQ_OPEN_INPUT, 0);
if (err < 0)
{
fprintf(stderr, "Cannot open default sequencer port\n");
return 1;
}
snd_seq_set_client_name(seq, "Dancer Midi Seqdump");
port = snd_seq_create_simple_port(seq, "input port1",
SND_SEQ_PORT_CAP_WRITE|SND_SEQ_PORT_CAP_SUBS_WRITE,
SND_SEQ_PORT_TYPE_APPLICATION);
if (port < 0)
{
fprintf(stderr, "Cannot open port\n");
return 1;
}
while (snd_seq_event_input(seq, &ev) >= 0)
{
switch (ev->type)
{
case SND_SEQ_EVENT_NOTEON:
printf("noteon %x %x %x\n", ev->data.note.channel, ev->data.note.note, ev->data.note.velocity);
break;
case SND_SEQ_EVENT_NOTEOFF:
printf("noteoff %x %x %x\n", ev->data.note.channel, ev->data.note.note, ev->data.note.velocity);
break;
}
}
}
============================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642At Mon, 27 Feb 2006 00:42:38 +0900,
Quoted 7 lines · Junichi Uekawa
Hi,
I'm seeing that USB MIDI keyboard (M-Audio Keystation 88es) is generating note-on events on both note-on and note-off. The difference being that note-off is generating an note-on event with velocity '0'.
Quoted 7 lines
The following code in
seq_midi_emul.c(snd_midi_process_event)looks suspiciously like what's needed for this device:/* Make sure that we don't have a note on that should really be * a note off */ if (ev->type == SNDRV_SEQ_EVENT_NOTEON && ev->data.note.velocity == 0) ev->type = SNDRV_SEQ_EVENT_NOTEOFF;
This code is irrelevant. This is for MIDI emulation like emu10k1 WaveTable, not for the real MIDI device.
Basically the given behavior is not a bug. The sequencer handles note-on with velocity 0 as it is. As a strict definition, note-off and note-on with zero velocity are different although they are used widely as identical in order to save bytes.
Takashi
Hi,
Quoted 12 lines
Quoted 11 lines
I'm seeing that USB MIDI keyboard (M-Audio Keystation 88es) is generating note-on events on both note-on and note-off. The difference being that note-off is generating an note-on event with velocity '0'.
The following code in
seq_midi_emul.c(snd_midi_process_event)looks suspiciously like what's needed for this device:/* Make sure that we don't have a note on that should really be * a note off */ if (ev->type == SNDRV_SEQ_EVENT_NOTEON && ev->data.note.velocity == 0) ev->type = SNDRV_SEQ_EVENT_NOTEOFF;
Quoted 7 lines
This code is irrelevant. This is for MIDI emulation like emu10k1 WaveTable, not for the real MIDI device.
Basically the given behavior is not a bug. The sequencer handles note-on with velocity 0 as it is. As a strict definition, note-off and note-on with zero velocity are different although they are used widely as identical in order to save bytes.
Thanks; I've looked into MIDI specs, and it was documented everywhere; it was just not obvious when I was looking into ALSA docs.
regards,
junichi
Signature · 1 line
dancer@{debian.org,netfort.gr.jp} Debian Project