Skip to contentSkip to conversation

saveenv

U-Boot-Users Nethra 2 participants 3 messages Feb 5, 2007 – Feb 6, 2007

lore
Share & tools
lore

Nethra

author
#0 lore raw

hi,

I am using MPC8272ADS based custom board.
Flash is MBM29LV160T(FUJITSU).
u-boot is u-boot-1.1.2

u-boot is working fine.But environment variables are not saved to the enviromental space.So it doesn't display saved environment variables after reset.

------------------------------------------------------------------
*** Warning - bad CRC, using default environment

In:     serial
Out:   serial
Err:    serial

-------------------------------------------------------------------

Note: For this flash unlock is not needed to erase readonly sectors of flash.Ithink it may be crc problem.

what may be the problem?please reply..

with regards,
Nethra

Signature · 2 lines
View this message in context: http://www.nabble.com/saveenv-tf3173980.html#a8805190
Sent from the Uboot - Users mailing list archive at Nabble.com.
#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

I am using MPC8272ADS based custom board.
Flash is MBM29LV160T(FUJITSU).
u-boot is u-boot-1.1.2

You may want to update your code. 1.1.2 is very old.

Quoted 6 lines

u-boot is working fine.But environment variables are not saved to the enviromental space.So it doesn't display saved environment variables after reset.

------------------------------------------------------------------
*** Warning - bad CRC, using default environment

And what exactly happens when you type "saveenv" ?

Quoted 1 line

flash.Ithink it may be crc problem.

Indeed, that's what the message says. Well spotted.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Where would we be without rhetorical questions?
author
#2 lore raw
Quoted 91 lines · wd
Quoted 4 lines · In message <[email protected]> you wrote:

I am using MPC8272ADS based custom board.
Flash is MBM29LV160T(FUJITSU).
u-boot is u-boot-1.1.2

You may want to update your code. 1.1.2 is very old.

nethra: no....now everything fine.
thnks for ur valuable advice.

Quoted 7 lines

u-boot is working fine.But environment variables are not saved to the enviromental space.So it doesn't display saved environment variables after
reset.

------------------------------------------------------------------
*** Warning - bad CRC, using default environment

And what exactly happens when you type "saveenv" ?

Nethra:this is what i get after saveenv

---------------------------------------------------
Saving Environment to Flash... Un-Protected 2 sectors
Erasing Flash...flash_erase: first: 26 last: 27

. done
Erased 2 sectors
Writing to Flash... done
Protected 2 sectors
-----------------------------------------------------

Quoted 1 line

flash.Ithink it may be crc problem.

Indeed, that's what the message says. Well spotted.

nethra: if i check environmental space it is as shown below,

        Cashel=> md FFF40000
        fff40000: b0c10f13 746f6f62 73677261 6f6f723d    ....toobsgraoor=
        fff40010: 642f3d74 6d2f7665 6c626474 326b636f    d/=tm/velbdt2kco
        fff40020: 6f6f6200 646d6374 6f6f623d 66206d74    oob.dmctoob=f mt
        fff40030: 30386666 00303030 746f6f62 616c6564    08ff.000toobaled
        fff40040: 00353d79 64756162 65746172 3438333d    .5=yduabetar483=
        fff40050: 73003030 6e696474 7265733d 006c6169    s.00nidtres=.lai
        fff40060: 6f647473 733d7475 61697265 7473006c    odtss=tuairets.l
        fff40070: 72726564 7265733d 006c6169 61687465    rredres=.laiahte
        fff40080: 463d7463 20324343 45485445 54454e52    F=tc 2CCEHTETENR
        fff40090: 61706900 3d726464 2e323931 2e383631    api.=rdd.291.861
        fff400a0: 362e3333 00000036 00000000 00000000    6.33...6........
        fff400b0: 00000000 00000000 00000000 00000000    ................
        fff400c0: 00000000 00000000 00000000 00000000    ................
        fff400d0: 00000000 00000000 00000000 00000000    ................
        fff400e0: 00000000 00000000 00000000 00000000    ................
        fff400f0: 00000000 00000000 00000000 00000000    ................
       Cashel=>

saved environmental variable is seen at last. But it will not displayed if i give printenv after reset.

with regards,
Nethra

Best regards,

Wolfgang Denk

Signature · 15 lines
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Where would we be without rhetorical questions?

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
Signature · 2 lines
View this message in context: http://www.nabble.com/saveenv-tf3173980.html#a8821046
Sent from the Uboot - Users mailing list archive at Nabble.com.