X-Windows locks up under concurrent OpenGL (Mesa) and I
Quoted 2 lines · Rick Gaudette
within a couple of hours. We can usually ssh into the hung machine from another machine and kill the application to bring back X. Top shows
Happy you.
Quoted 1 line
CPUs:
Dual PIII / 800MHz.
Quoted 1 line
Motherboards:
Gigabyte GA-6VXD7 (with VIA694X)
Quoted 1 line
Video cards:
G450 with XF 4.1.0 drivers.
Quoted 1 line
OS Versions:
Debian.
Quoted 1 line
Typical system config:
45GB IDE
256MB RAM
Quoted 1 line
A simple way to do persistent concurrent I/O:
Watching fbtv on second G450 head. It stresses AGP as it generates 30MBps stream from PCI -> AGP...
Quoted 1 line
Any help with this problem would be greatly appreciated.
... and machine is dead - poweroff button does not work. I always thought that it is specific to VIA chipsets, as almost same configuration (PII instead of PIII) worked fine on GA-6BXDS (i440BX), and it is new to me that AMD has same troubles. Help is simple - do not use VIA chipsets, at least I did not found any other way how to get it to work (except disabling mainmemory,PCI->AGP transfers (CPU->AGP are OK, obviously...)).
Petr Vandrovec [email protected]
P.S.: If you have dualhead G400 on VIA and two bt848 grabbers, just run one fbtv -k on first head, and another fbtv -k on second head. It will die as soon as you hit enter on second fbtv (and of course they must be in <=16bpp, as 694X does not handle even one memory stream needed for 32bpp full PAL PCI->AGP transfer).
Quoted 3 lines · Petr Vandrovec
Help is simple - do not use VIA chipsets, at least I did not found any other way how to get it to work (except disabling mainmemory,PCI->AGP transfers (
CPU->AGPare OK, obviously...)).
ABIT KG-7-RAID
Tyan Tiger MP (S2460)
These are not VIA chipsets... but he described the same hangs anyway. So, it appears some other explanation is needed than "it's a VIA bug".
-Dan
Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]