wifi: rtw88: Don't use static local variable in rtw8822b_set_tx_power_index_by_rate
PATCH 1/2 wifi: rtw88: Don't use static local variable in rtw8822b_set_tx_power_index_by_rate
Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values.
Move the variable to the caller and pass a pointer to it to rtw8822b_set_tx_power_index_by_rate().
--- drivers/net/wireless/realtek/rtw88/rtw8822b.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/wireless/realtek/rtw88/rtw8822b.c +8 -6
@@ -935,11 +935,11 @@ static void query_phy_status(struct rtw_dev *rtwdev, u8 *phy_status, }static void -rtw8822b_set_tx_power_index_by_rate (struct rtw_dev *rtwdev,u8 path,u8 rs) +rtw8822b_set_tx_power_index_by_rate (struct rtw_dev *rtwdev,u8 path, +u8 rs,u32 *phy_pwr_idx) {struct rtw_hal *hal = &rtwdev->hal;static const u32 offset_txagc[2 ] = {0x1d00 ,0x1d80 }; -static u32 phy_pwr_idx;u8 rate, rate_idx, pwr_index, shift;int j;
@@ -947,12 +947,12 @@ rtw8822b_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs) rate = rtw_rate_section[rs][j]; pwr_index = hal->tx_pwr_tbl[path][rate]; shift = rate &0x3 ; - phy_pwr_idx |= ((u32 )pwr_index << (shift *8 )); + *phy_pwr_idx |= ((u32 )pwr_index << (shift *8 ));if (shift ==0x3 ) { rate_idx = rate &0xfc ;rtw_write32 (rtwdev, offset_txagc[path] + rate_idx, - phy_pwr_idx); - phy_pwr_idx =0 ; + *phy_pwr_idx); + *phy_pwr_idx =0 ; } } }
@@ -960,11 +960,13 @@ rtw8822b_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)static void rtw8822b_set_tx_power_index (struct rtw_dev *rtwdev) {struct rtw_hal *hal = &rtwdev->hal; +u32 phy_pwr_idx =0 ;int rs, path;for (path =0 ; path < hal->rf_path_num; path++) {for (rs =0 ; rs <RTW_RATE_SECTION_MAX ; rs++) -rtw8822b_set_tx_power_index_by_rate (rtwdev, path, rs); +rtw8822b_set_tx_power_index_by_rate (rtwdev, path, rs, + &phy_pwr_idx); } }
Signature · 1 line
2.48.1
PATCH 2/2 wifi: rtw88: Don't use static local variable in rtw8821c_set_tx_power_index_by_rate
Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values.
Move the variable to the caller and pass a pointer to it to rtw8821c_set_tx_power_index_by_rate().
--- drivers/net/wireless/realtek/rtw88/rtw8821c.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/net/wireless/realtek/rtw88/rtw8821c.c +8 -6
@@ -680,11 +680,11 @@ static void query_phy_status(struct rtw_dev *rtwdev, u8 *phy_status, }static void -rtw8821c_set_tx_power_index_by_rate (struct rtw_dev *rtwdev,u8 path,u8 rs) +rtw8821c_set_tx_power_index_by_rate (struct rtw_dev *rtwdev,u8 path, +u8 rs,u32 *phy_pwr_idx) {struct rtw_hal *hal = &rtwdev->hal;static const u32 offset_txagc[2 ] = {0x1d00 ,0x1d80 }; -static u32 phy_pwr_idx;u8 rate, rate_idx, pwr_index, shift;int j;
@@ -692,12 +692,12 @@ rtw8821c_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs) rate = rtw_rate_section[rs][j]; pwr_index = hal->tx_pwr_tbl[path][rate]; shift = rate &0x3 ; - phy_pwr_idx |= ((u32 )pwr_index << (shift *8 )); + *phy_pwr_idx |= ((u32 )pwr_index << (shift *8 ));if (shift ==0x3 || rate ==DESC_RATEVHT1SS_MCS9 ) { rate_idx = rate &0xfc ;rtw_write32 (rtwdev, offset_txagc[path] + rate_idx, - phy_pwr_idx); - phy_pwr_idx =0 ; + *phy_pwr_idx); + *phy_pwr_idx =0 ; } } }
@@ -705,6 +705,7 @@ rtw8821c_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)static void rtw8821c_set_tx_power_index (struct rtw_dev *rtwdev) {struct rtw_hal *hal = &rtwdev->hal; +u32 phy_pwr_idx =0 ;int rs, path;for (path =0 ; path < hal->rf_path_num; path++) {
@@ -712,7 +713,8 @@ static void rtw8821c_set_tx_power_index(struct rtw_dev *rtwdev)if (rs ==RTW_RATE_SECTION_HT_2S || rs ==RTW_RATE_SECTION_VHT_2S )continue ; -rtw8821c_set_tx_power_index_by_rate (rtwdev, path, rs); +rtw8821c_set_tx_power_index_by_rate (rtwdev, path, rs, + &phy_pwr_idx); } } }
Signature · 1 line
2.48.1
Re: [PATCH 2/2] wifi: rtw88: Don't use static local variable in rtw8821c_set_tx_power_index_by_rate
Bitterblue Smith <[email protected]> worte:
Quoted 8 lines
Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values.
Move the variable to the caller and pass a pointer to it to
rtw8821c_set_tx_power_index_by_rate().Signed-off-by Bitterblue Smith <[email protected]>
Quoted 9 lines · Bitterblue Smith
Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values.
Move the variable to the caller and pass a pointer to it to
rtw8822b_set_tx_power_index_by_rate().Signed-off-by Bitterblue Smith <[email protected]>
By the way, if you interest to cleanup rtw88 and avoid this kind of limits, we can check symbols of output of "objdump -t *.o | grep "\.data". Patches are welcome.
Quoted 9 lines · Ping-Ke Shih
Quoted 8 lines · Bitterblue Smith
Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values.
Move the variable to the caller and pass a pointer to it to
rtw8822b_set_tx_power_index_by_rate().
Quoted 8 lines
Quoted 1 line
Signed-off-by Bitterblue Smith <[email protected]>Acked-by Ping-Ke Shih <[email protected]>By the way, if you interest to cleanup rtw88 and avoid this kind of limits, we can check symbols of output of "objdump -t *.o | grep "\.data". Patches are welcome.
I see some tables that should be const. I will send a patch.
Ping-Ke Shih
maintainerQuoted 9 lines · Bitterblue Smith
Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values.
Move the variable to the caller and pass a pointer to it to
rtw8822b_set_tx_power_index_by_rate().Signed-off-by Bitterblue Smith <[email protected]>Acked-by Ping-Ke Shih <[email protected]>
2 patch(es) applied to rtw-next branch of rtw.git, thanks.
00451eb3bec7 wifi: rtw88: Don't use static local variable in rtw8822b_set_tx_power_index_by_rate 0d1d165eff9d wifi: rtw88: Don't use static local variable in rtw8821c_set_tx_power_index_by_rate