Distorted playback with libsndfile
Hi!
I am currently working on a small app, which uses
the libsndfile to load audio files. But I cannot
seem to get the playback working properly.
The snd_pcm_t instance is set up and configured
in the following method:
int audioCtrl::setFormat(unsigned channels, unsigned rate,
int bufferSize){ snd_pcm_hw_params_t *params;
snd_pcm_format_t fmt;
int actualChannels = channels;
int err;
bool errorOccured = false;
// Allocating parameter handle
if ((err = snd_pcm_hw_params_malloc (¶ms)) < 0) {
printf("Malloc");
errorOccured = true;
}
// Opening the sound device
if ((err = snd_pcm_open (&outputHandle, deviceName,
SND_PCM_STREAM_PLAYBACK, 0)) < 0) {
printf("Open");
errorOccured = true;
}
// Check if valid parameters are available
if ((err = snd_pcm_hw_params_any (outputHandle, params)) < 0) {
printf("Any");
errorOccured = true;
}
// Set access method; Interleaved - alternating channel data
if ((err = snd_pcm_hw_params_set_access (outputHandle, params,
SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
printf("Access");
errorOccured = true;
}
// Probing the device for the most common data formats
if (snd_pcm_hw_params_set_format (outputHandle, params,
SND_PCM_FORMAT_S16) == 0) {
fmt = SND_PCM_FORMAT_S16;
} else if (snd_pcm_hw_params_set_format (outputHandle, params,
SND_PCM_FORMAT_S32_LE) == 0) {
fmt = SND_PCM_FORMAT_S32_LE;
} else if (snd_pcm_hw_params_set_format (outputHandle, params,
SND_PCM_FORMAT_S8) == 0) { fmt = SND_PCM_FORMAT_S8;
} else if (snd_pcm_hw_params_set_format (outputHandle, params,
SND_PCM_FORMAT_FLOAT_LE) == 0) {
fmt = SND_PCM_FORMAT_FLOAT_LE;
} else {
printf("Format");
errorOccured = true;
}
// Probing the device for the samplerate of the sample
if ((err = snd_pcm_hw_params_set_rate_near (outputHandle, params, &rate,
0)) < 0) {
printf("Rate");
errorOccured = true;
}
// setting the number of channels
if ((err = snd_pcm_hw_params_set_channels (outputHandle, params,
channels)) < 0) {
printf("Channels");
errorOccured = true;
}
// Setting the parameters
if ((err = snd_pcm_hw_params (outputHandle, params)) < 0) {
printf("Params");
errorOccured = true;
}
// Preparing the device for playback
if ((err = snd_pcm_prepare (outputHandle)) < 0) {
printf("Prepare");
errorOccured = true;}
snd_pcm_hw_params_free (params);
if(errorOccured) return -1;
else if(fmt == SND_PCM_FORMAT_S8) return 8; else if(fmt == SND_PCM_FORMAT_S16) return 16; else if(fmt == SND_PCM_FORMAT_S32_LE) return 32; else if(fmt == SND_PCM_FORMAT_FLOAT) return 1; else return 0;
}
After this initialisation, a separate thread gets buffers from the sndfile instance and writes them to the device using the following method:
bool audioCtrl::playBuffer(void *buffer, int size){
int err;
if ((err = snd_pcm_writei (outputHandle, buffer, size)) != size)
return false;
else return true;
}
For 16 bit playback, I have tried using buffers from both sf_read_short and sf_read_int with different results:
buffers from sf_read_short sound totally distorted and with buffers from sf_read_int (stereo file) data from both channels are played only on the right channel in half speed (I suppose the first 16 bits of the ints are 0s, thus only silence is written to the left channel).
Is there an error in the initialisation method? Did I forget to set a parameter? I did not fully grasp the concept of periods, so maybe that could be the problem!? I guess the sndfile buffers should work without conversion.
Greets,
Jan
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click