Skip to contentSkip to conversation

x86: fix keeping track of AMD C1E

PATCH Michal Schmidt 3 participants 4 messages Jul 13, 2010 – Jul 18, 2010 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 909896077.345011279054483129.JavaMail.root@zmail02.collab.prod.int.phx2.redhat.com

#1 lore raw
Quoted 4 lines · ----- "Borislav Petkov

... and this is strange, I didn't experience anything like that on our X6 boxes here couple of months ago. But maybe something got changed in later kernels to trigger that behavior. Michal, what chipset is that and do you have the latest BIOS on it?

The chipset is 890FX. Motherboard Asus M4A89TD PRO/USB3. BIOS is the latest version: 0901 (05/17/2010 according to dmidecode)

I found another person reporting the same symptoms on
GIGABYTE GA-MA770T-UD3P AthlonXII 620 (4 cores) kernel 2.6.33.5 (Mandriva)
(http://www.abclinuxu.cz/poradna/hardware/show/308799, in Czech)

Michal

#2 lore raw
Quoted 6 lines · Michal Schmidt
Quoted 4 lines · ----- "Borislav Petkov

... and this is strange, I didn't experience anything like that on our X6 boxes here couple of months ago. But maybe something got changed in later kernels to trigger that behavior. Michal, what chipset is that and do you have the latest BIOS on it?

Quoted 6 lines

The chipset is 890FX. Motherboard Asus M4A89TD PRO/USB3. BIOS is the latest version: 0901 (05/17/2010 according to dmidecode)

I found another person reporting the same symptoms on
GIGABYTE GA-MA770T-UD3P AthlonXII 620 (4 cores) kernel 2.6.33.5 (Mandriva)
(http://www.abclinuxu.cz/poradna/hardware/show/308799, in Czech)

This also sounds like: https://bugzilla.kernel.org/show_bug.cgi?id=15289

thanks
-john

#3 lore raw
In reply to Michal Schmidt
Quoted 5 lines · Michal Schmidt

The chipset is 890FX. Motherboard Asus M4A89TD PRO/USB3. BIOS is the latest version: 0901 (05/17/2010 according to dmidecode)

I found another person reporting the same symptoms on GIGABYTE GA-MA770T-UD3P AthlonXII 620 (4 cores) kernel 2.6.33.5

(Mandriva)

Quoted 1 line

(http://www.abclinuxu.cz/poradna/hardware/show/308799, in Czech)

I have exactly the same problem on my system.
Gigabyte GA-MA770-UD3 (Rev. 1.0), latest BIOS F9g, Phenom II X4 905e.

Will try your patch and report back.

#4 lore raw
In reply to Michal Schmidt
Quoted 3 lines · Michal Schmidt

I found another person reporting the same symptoms on
GIGABYTE GA-MA770T-UD3P AthlonXII 620 (4 cores) kernel 2.6.33.5 (Mandriva)
(http://www.abclinuxu.cz/poradna/hardware/show/308799, in Czech)

Here's the relevant part of my dmesg, kernel 2.6.35-rc5 with your debbuging patch applied (just the debbuging patch, no other fix/patch in this thread). The full dmesg output is attached.

[....]
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
identify_cpu: after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.

... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f

ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 905e Processor stepping 02
c1e_idle: cpu: 0, bits 0x08000000, c1e_detected: 0, boot_cpu_has(C1E): 0 System has AMD C1E enabled
Switch to broadcast mode on CPU0
Booting Node 0, Processors #1
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 1
identify_cpu: after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0 Switch to broadcast mode on CPU1
#2
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu: after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0 Switch to broadcast mode on CPU2
#3
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu: after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0 Brought up 4 CPUs
Total of 4 processors activated (20092.25 BogoMIPS).
Switch to broadcast mode on CPU3
NET: Registered protocol family 16
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M

Linux version 2.6.35-rc5-c1e_debug (root@liesel) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP PREEMPT Sun Jul 18 17:50:33 CEST 2010 Command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cfd81000 (usable)
BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFE00000 mask FFFFFFE00000 uncachable
4 base 000100000000 mask FFFF00000000 write-back
5 base 000200000000 mask FFFFE0000000 write-back
6 base 000220000000 mask FFFFF0000000 write-back
7 disabled
TOM2: 0000000230000000 aka 8960M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcfd81 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cfd81000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cfc00000 page 2M
00cfc00000 - 00cfd81000 page 4k
kernel direct mapping tables up to cfd81000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000230000000
0100000000 - 0200000000 page 1G
0200000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ a000-c000
RAMDISK: 37a0c000 - 37ff0000
ACPI: RSDP 00000000000f6ed0 00014 (v00 GBT )
ACPI: RSDT 00000000cfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfde30c0 06D75 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfde0000 00040
ACPI: SSDT 00000000cfde9f00 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000cfdea7c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfdea800 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfde9e40 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Initmem setup node 0 0000000000000000-0000000230000000
NODE_DATA [0000000100000000 - 0000000100026fff]
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880100200000-ffff8801073fffff] on node 0
Zone PFN ranges:

  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000098
    0: 0x00000100 -> 0x000cfd81
    0: 0x00100000 -> 0x00230000

On node 0 totalpages: 2096408
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3935 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 832953 pages, LIFO batch:31
Normal zone: 17024 pages used for memmap
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [7000 - 77ff]
PM: Registered nosave memory: 0000000000098000 - 0000000000099000
PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000cfd81000 - 00000000cfde0000
PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880006000000 s81536 r8192 d20864 u262144
pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065048
Policy zone: Normal
Kernel command line: root=/dev/mapper/root luks_root=/dev/sda3 luks="root" resume=/dev/mapper/swap splash=silent vga=0x31a clocksource=hpet pci=use_crs early_res array is doubled to 128 at [b000 - bfff]
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Subtract (63 early reservations)
#1 [0001000000 - 0005e2db04] TEXT DATA BSS
#2 [0037a0c000 - 0037ff0000] RAMDISK
#3 [0000098400 - 0000100000] BIOS reserved
#4 [0005e2e000 - 0005e2e0fe] BRK
#5 [0000001000 - 0000003000] TRAMPOLINE
#6 [0000003000 - 0000007000] ACPI WAKEUP
#7 [0000008000 - 000000a000] PGTABLE
#8 [000000a000 - 000000b000] PGTABLE
#9 [0100000000 - 0100027000] NODE_DATA

  #10 [0005e2e100 - 0005e2f100]         BOOTMEM
  #11 [000622f100 - 000622f700]         BOOTMEM
  #12 [0100027000 - 0100028000]         BOOTMEM
  #13 [0100028000 - 0100029000]         BOOTMEM
  #14 [0100200000 - 0107400000]        MEMMAP 0
  #15 [0005e2db40 - 0005e2dcc0]         BOOTMEM
  #16 [0005e2f100 - 0005e47100]         BOOTMEM
  #17 [0005e47100 - 0005e5f100]         BOOTMEM
  #18 [0005e60000 - 0005e61000]         BOOTMEM
  #19 [0005e2dcc0 - 0005e2dd01]         BOOTMEM
  #20 [0005e2dd40 - 0005e2dd83]         BOOTMEM
  #21 [0005e5f100 - 0005e5f368]         BOOTMEM
  #22 [0005e2ddc0 - 0005e2de28]         BOOTMEM
  #23 [0005e2de40 - 0005e2dea8]         BOOTMEM
  #24 [0005e2dec0 - 0005e2df28]         BOOTMEM
  #25 [0005e2df40 - 0005e2dfa8]         BOOTMEM
  #26 [0005e5f380 - 0005e5f3e8]         BOOTMEM
  #27 [0005e5f400 - 0005e5f468]         BOOTMEM
  #28 [0005e5f480 - 0005e5f4e8]         BOOTMEM
  #29 [0005e5f500 - 0005e5f568]         BOOTMEM
  #30 [0005e5f580 - 0005e5f5e8]         BOOTMEM
  #31 [0005e5f600 - 0005e5f668]         BOOTMEM
  #32 [0005e2dfc0 - 0005e2dfe0]         BOOTMEM
  #33 [0005e5f680 - 0005e5f6a0]         BOOTMEM
  #34 [0005e5f6c0 - 0005e5f743]         BOOTMEM
  #35 [0005e5f780 - 0005e5f803]         BOOTMEM
  #36 [0006000000 - 000601b000]         BOOTMEM
  #37 [0006040000 - 000605b000]         BOOTMEM
  #38 [0006080000 - 000609b000]         BOOTMEM
  #39 [00060c0000 - 00060db000]         BOOTMEM
  #40 [0006100000 - 000611b000]         BOOTMEM
  #41 [0006140000 - 000615b000]         BOOTMEM
  #42 [0006180000 - 000619b000]         BOOTMEM
  #43 [00061c0000 - 00061db000]         BOOTMEM
  #44 [0005e5f840 - 0005e5f848]         BOOTMEM
  #45 [0005e5f880 - 0005e5f888]         BOOTMEM
  #46 [0005e5f8c0 - 0005e5f8e0]         BOOTMEM
  #47 [0005e5f900 - 0005e5f940]         BOOTMEM
  #48 [0005e5f940 - 0005e5fa60]         BOOTMEM
  #49 [0005e5fa80 - 0005e5fac8]         BOOTMEM
  #50 [0005e5fb00 - 0005e5fb48]         BOOTMEM
  #51 [0005e5fb80 - 0005e5fd80]         BOOTMEM
  #52 [0005e5fd80 - 0005e5ff80]         BOOTMEM
  #53 [0005e61000 - 0005e61200]         BOOTMEM
  #54 [0005e61200 - 0005e61400]         BOOTMEM
  #55 [0005e61400 - 0005e61600]         BOOTMEM
  #56 [0005e61600 - 0005e69600]         BOOTMEM
  #57 [0020000000 - 0024000000]         BOOTMEM
  #58 [0005e5ff80 - 0005e5ffa0]         BOOTMEM
  #59 [0006230000 - 000a230000]         BOOTMEM
  #60 [0005e69600 - 0005e89600]         BOOTMEM
  #61 [0005e89600 - 0005ec9600]         BOOTMEM
  #62 [000000c000 - 0000014000]         BOOTMEM

Memory: 8050012k/9175040k available (4358k kernel code, 789408k absent, 335620k reserved, 3155k data, 1816k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:4352
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2511.864 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5023.72 BogoMIPS (lpj=2511861)
pid_max: default: 32768 minimum: 301
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
tseg: 00cfe00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
identify_cpu: before ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
identify_cpu: after ANDing, c1e_detected: 0, boot_cpu_has(C1E): 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.

... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f

ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 905e Processor stepping 02
c1e_idle: cpu: 0, bits 0x08000000, c1e_detected: 0, boot_cpu_has(C1E): 0 System has AMD C1E enabled
Switch to broadcast mode on CPU0
Booting Node 0, Processors #1
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 1
identify_cpu: after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Switch to broadcast mode on CPU1
#2
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu: after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Switch to broadcast mode on CPU2
#3
identify_cpu: before ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
identify_cpu: after ANDing, c1e_detected: 1, boot_cpu_has(C1E): 0
Brought up 4 CPUs
Total of 4 processors activated (20092.25 BogoMIPS).
Switch to broadcast mode on CPU3
NET: Registered protocol family 16
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [e0000000, e00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
TOM2: 0000000230000000 aka 8960M
bus: [00, 03] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x000a0000-0x000bffff]
bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
bus: 00 index 3 [mem 0xe0400000-0xffffffff]
bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled

pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]

pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff] pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff] pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled

pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]

pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled
pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:00:02.0: PCI bridge to [bus 01-01]

pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled
pci 0000:00:0a.0: PCI bridge to [bus 02-02]

pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
reserve RAM buffer: 0000000000098400 - 000000000009ffff
reserve RAM buffer: 00000000cfd81000 - 00000000cfffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref] pnp 00:0c: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0c: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered

system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0220-0x0225] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:02: [io  0x4100-0x411f] has been reserved
system 00:02: [io  0x0228-0x022f] has been reserved
system 00:02: [io  0x0238-0x023f] has been reserved
system 00:02: [io  0x040b] has been reserved
system 00:02: [io  0x04d6] has been reserved
system 00:02: [io  0x0c00-0x0c01] has been reserved
system 00:02: [io  0x0c14] has been reserved
system 00:02: [io  0x0c50-0x0c52] has been reserved
system 00:02: [io  0x0c6c-0x0c6d] has been reserved
system 00:02: [io  0x0c6f] has been reserved
system 00:02: [io  0x0cd0-0x0cd1] has been reserved
system 00:02: [io  0x0cd2-0x0cd3] has been reserved
system 00:02: [io  0x0cd4-0x0cdf] has been reserved
system 00:02: [io  0x4000-0x40fe] has been reserved
system 00:02: [io  0x4210-0x4217] has been reserved
system 00:02: [io  0x0b00-0x0b0f] has been reserved
system 00:02: [io  0x0b10-0x0b1f] has been reserved
system 00:02: [io  0x0b20-0x0b3f] has been reserved

system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0c: [mem 0xcfde0000-0xcfdeffff] could not be reserved system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved system 00:0c: [mem 0xcfdf0000-0xcfdfffff] has been reserved system 00:0c: [mem 0xcfe00000-0xcfefffff] could not be reserved system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] could not be reserved system 00:0c: [mem 0xfff80000-0xfffeffff] has been reserved pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref] pci 0000:00:02.0: PCI bridge to [bus 01-01]

pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:0a.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]

pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:0a.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6032k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1279476208.487:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Btrfs loaded
msgmni has been set to 15863
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 5120k, total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
MM: desc_per_page = 128
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
Netfilter messages via NETLINK v0.30.
CCID: Activated CCID 2 (TCP-like)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 registered taskstats version 1
Freeing unused kernel memory: 1816k freed
ACPI: acpi_idle registered with cpuidle
acpi_processor_cstate_check: enter
acpi_processor_cstate_check: max_cstate: 8
SCSI subsystem initialized
libata version 3.00 loaded.
Uniform Multi-Platform E-IDE driver
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
fuse init (API version 7.14)
loop: module loaded
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected] udevd version 128 started
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
CE: hpet increased min_delta_ns to 7500 nsec
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-rc5-c1e_debug ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-rc5-c1e_debug ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata5: softreset failed (device not ready)
ata3: softreset failed (device not ready)
ata8: softreset failed (device not ready)
ata3: applying SB600 PMP SRST workaround and retrying
ata8: applying SB600 PMP SRST workaround and retrying
ata5: applying SB600 PMP SRST workaround and retrying
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: HPA detected: current 976771055, native 976773168
usb 1-1: New USB device found, idVendor=07d1, idProduct=3c03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: 802.11 bg WLAN
usb 1-1: Manufacturer: Ralink
ata3.00: HPA detected: current 976771055, native 976773168
ata3.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
ata3.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-8: WDC WD5000AAKS-00YGA0, 12.01C02, max UDMA/133
ata8.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
ata5.00: ATA-8: OCZ SOLID_SSD, 02.10104, max UDMA/100
ata5.00: 62586880 sectors, multi 0: LBA
ata5.00: configured for UDMA/100
ata4: softreset failed (device not ready)
ata4: applying SB600 PMP SRST workaround and retrying
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
ata4.00: configured for UDMA/100

scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223F  SB00 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      OCZ SOLID_SSD    02.1 PQ: 0 ANSI: 5
scsi 7:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sd 2:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 62586880 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sdc:
sda: sdb1
sda1 sda2 sda3 sda4
ohci_hcd 0000:00:12.0: OHCI Host Controller
sdc1
sd 4:0:0:0: [sdb] Attached SCSI disk
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
sd 7:0:0:0: [sdc] Attached SCSI disk
sd 2:0:0:0: [sda] Attached SCSI disk
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.35-rc5-c1e_debug ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 3-2: new full speed USB device using ohci_hcd and address 2
usb 3-2: New USB device found, idVendor=04a9, idProduct=220d
usb 3-2: New USB device strings: Mfr=64, Product=77, SerialNumber=0
usb 3-2: Product: CanoScan
usb 3-2: Manufacturer: Canon
usb 4-2: new low speed USB device using ohci_hcd and address 2
usb 4-2: New USB device found, idVendor=051d, idProduct=0002
usb 4-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 4-2: Product: Back-UPS ES 700 FW:829.D2 .I USB FW:D2
usb 4-2: Manufacturer: APC
usb 4-2: SerialNumber: 5B0825T20337
usbcore: registered new interface driver hiddev
usb 4-3: new full speed USB device using ohci_hcd and address 3
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 700 FW:829.D2 .I USB FW:D2 ] on usb-0000:00:12.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 4-3: New USB device found, idVendor=046d, idProduct=c52b
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: USB Receiver
usb 4-3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input1
generic-usb 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.1-3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input2
generic-usb 0003:046D:C52B.0003: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.1-3/input1 generic-usb 0003:046D:C52B.0004: hiddev98,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-3/input2
alg: No test for xts(twofish) (xts(twofish-asm))
XFS mounting filesystem dm-0
Ending clean XFS mount for filesystem: dm-0
udevd version 128 started
k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: Attached scsi generic sg3 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input3
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [mem 0x00000b00-0x00000b0f 64bit pref window] parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA for country: EU
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ppdev: user-space parallel port driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90011ede000, 00:1f:d0:be:4c:a5, XID 1c4000c0 IRQ 42
Error: Driver 'pcspkr' is already registered, aborting...
udev: renamed network interface eth0 to eth1
sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
phy0 -> rt73usb_validate_eeprom: EEPROM recovery - NIC: 0xffef
phy0 -> rt73usb_validate_eeprom: EEPROM recovery - Led: 0xe000
phy0 -> rt73usb_validate_eeprom: EEPROM recovery - RSSI OFFSET A: 0x0000
phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a.
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt73usb-phy0::radio
Registered led device: rt73usb-phy0::assoc
Registered led device: rt73usb-phy0::quality
usbcore: registered new interface driver rt73usb
ALSA sound/pci/hda/patch_realtek.c:1308: SKU: Nid=0x0 sku_cfg=0x0000e601
ALSA sound/pci/hda/patch_realtek.c:1310: SKU: port_connectivity=0x0
ALSA sound/pci/hda/patch_realtek.c:1311: SKU: enable_pcbeep=0x1
ALSA sound/pci/hda/patch_realtek.c:1312: SKU: check_sum=0x00000000
ALSA sound/pci/hda/patch_realtek.c:1313: SKU: customization=0x00000000
ALSA sound/pci/hda/patch_realtek.c:1314: SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1315: SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1316: SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1317: SKU: override=0x1
hda_codec: ALC888: BIOS auto-probing.
ALSA sound/pci/hda/hda_codec.c:4435: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)

ALSA sound/pci/hda/hda_codec.c:4439:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4443:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4444:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4447:    dig-out=0x1e/0x0
ALSA sound/pci/hda/hda_codec.c:4455:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
ALSA sound/pci/hda/hda_codec.c:4457:    dig-in=0x1f

ALSA sound/pci/hda/patch_realtek.c:1374: realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
uhci_hcd: USB Universal Host Controller Interface driver
device-mapper: ioctl: unable to remove open device temporary-cryptsetup-3233
XFS mounting filesystem dm-2
Ending clean XFS mount for filesystem: dm-2
XFS mounting filesystem dm-3
Ending clean XFS mount for filesystem: dm-3
XFS mounting filesystem dm-4
Ending clean XFS mount for filesystem: dm-4
Adding 8383904k swap on /dev/mapper/swap. Priority:-1 extents:1 across:8383904k TCP vegas registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ata5.00: configured for UDMA/100
ata5: EH complete
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

powernow-k8: Found 1 AMD Phenom(tm) II X4 905e Processor (4 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (2500 MHz)
powernow-k8:    1 : pstate 1 (1900 MHz)
powernow-k8:    2 : pstate 2 (1400 MHz)
powernow-k8:    3 : pstate 3 (800 MHz)
it87: Found IT8720F chip at 0x228, revision 5
it87: Routing internal VCCH to in7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
it87: Beeping is supported

phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'.
phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7.
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 102. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 4, CWmax: 5, Aifs: 2, TXop: 188. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 5, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 5, CWmax: 10, Aifs: 7, TXop: 0.
NET: Registered protocol family 17
wlan0: deauthenticating from 00:1d:7e:c6:f3:21 by local choice (reason=3)
wlan0: authenticate with 00:1d:7e:c6:f3:21 (try 1)
wlan0: authenticated
wlan0: associate with 00:1d:7e:c6:f3:21 (try 1)
wlan0: RX AssocResp from 00:1d:7e:c6:f3:21 (capab=0x411 status=0 aid=1)
wlan0: associated
phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 0 - CWmin: 2, CWmax: 3, Aifs: 2, TXop: 47. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 1 - CWmin: 3, CWmax: 4, Aifs: 2, TXop: 94. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 2 - CWmin: 4, CWmax: 10, Aifs: 3, TXop: 0. phy0 -> rt2x00mac_conf_tx: Info - Configured TX queue 3 - CWmin: 4, CWmax: 10, Aifs: 7, TXop: 0.
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold