Skip to contentSkip to conversation

Exposing the same VG from two different disks

linux-lvm [email protected] 2 participants 2 messages Jun 16, 2009

lore
Share & tools
lore
#0 lore raw

Thanks to everyone who replied. The vgimportclone worked really well and I can recommend it to anyone who is in my situation.

I have a follow up question about how the LVM filter works in the script. Should I post here or to the LVM Devel list instead?

Just in case here is the right place !!! My question is, I have multiple paths to the same disks so I have masked the individual paths (the sd devices) and just exposed the logical deives (the emcpower devices). The script loses this filter and complains about lots of duplicate PV ids as it runs through. This "problem" is purely cosmetic and doesn't seem to in anyway effect the script from working. If this is not expected behaviour and the fix is fairly straight forward I'd be more than happy to test any fix. I've had a look at trying to see where the errors are coming from but I have to admit my LVM knowledge isn't up to it.

Thanks again to everyone for their hope,
Liam

Quoted 43 lines · On Fri, 2009-06-05 at 15:18 +0200, [email protected] wrote:
Quoted 16 lines

Hi,

I'm not sure if what I'm trying to do is possible or not but hopefully
someone out there can help!!

I have a volume group which consists of a LUN (/dev/emcpowerv1) in an
EMC cabinet. To backup up the disk I use EMC technology to synchronise a second LUN (/dev/emcpoweraf1) with the first, when the synchronisation is complete I then break the connection. At this point I have two identical volume groups exposed to the same host. What I would like to do is rename the second volume group and mount its logical volumes. However I can't because (understandably) LVM doesn't like having two identical volume groups so when I issue pvchange -u I get...

Quoted 2 lines
# pvchange -u /dev/emcpoweraf1
  Found duplicate PV dXiYI6nVqu8UpXO2mlaWiKKPKSBPrRbn: using /dev/emcpowerv1 

not /dev/emcpoweraf1

Quoted 2 lines

get_pv_from_vg_by_id: vg_read failed to read VG ! /dev/emcpowerv1: write failed after 0 of 4096 at 4096: Operation not

permitted

Quoted 4 lines

pv_write with new uuid failed for /dev/emcpowerv1. 0 physical volumes changed / 1 physical volume not changed

Notice I issue the command against /dev/emcpoweraf1 but it complains about

writing to /dev/emcpowerv1.

Take a look at the vgimportclone script posted to the lvm-devel list last month:

http://www.redhat.com/archives/lvm-devel/2009-May/msg00130.html

Regards,
Bryn.

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

#1 lore raw

[linux-lvm] pvcreate --uuid and keep data

Hellos

I've got a error on vgdisplay saying that a physical volume is lost

vgdisplay --partial oracle
Partial mode. Incomplete volume groups will be activated read-only. Couldn't find device with uuid '1dIe2G-QEtx-MGsI-DGF1-Lk10-nl8E-eg1Bb6'.

Checked the archive/backup metadata info and it's not up2date, so can't issue a vgcfgrestore, right? I googled and found this aproach
pvcreate --uuid LOST ID
My question is, what about the date in the partiton? is it kept? no problemos with it?

Thanks
Jose

Signature · 3 lines
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.